XM-1 5x7.5mm Crystal Resonator 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description: Features: Connor-Winfield's model XM-1 is a Crystal Resonator in a 5mm x 7.5mm surface mount package. Designed for applications requiring a small packaged tight tolerance crystal resonator. The surface mount package is designed for high density mounting and is optimum for mass production. Model: XM-1 Frequency Calibration @ 25°C: +/-50 ppm Frequency Stability: +/-50 ppm Temperature Range: -10 to 60°C Tape and Reel Packaging RoHS Compliant / Lead Free Electrical Specifications Parameter Minimum Nominal Maximum Output Frequency 8 - 100 Operation ModeFundamental, 3rd Overtone or 5th Overtone Cut AT Cut Frequency Calibration (@25 °C) -50 - 50 Frequency Stability vs. Temp -50 - 50 Operating Temperature Range: -10 - 60 Shunt Capacitance (C0) - - 7 Load Capacitance (CL) See table below Equivalent Series Resistance:(ESR) See table below Drive Level - - 100 Insulation Resistance 500M - - Aging: (1st Year) - - ±5.0 Frequency Range Mode of Operation 8 MHz to 9.999 MHz 10 MHz to 15.999 MHz 16 MHz to 32 MHz 28 MHz to 83.999 MHz 84 MHz to 100 MHz Fundamental Fundamental Fundamental 3rd Overtone 5th Overtone Units MHz Notes ppm ppm °C pF uW ohm ppm ESR @ 100 Vdc CL 60 Ohms Max. 50 Ohms Max. 40 Ohms Max. 60 Ohms Max. 80 Ohms Max. 16 pF 16 pF 16 pF Series Series Environmental Characteristics Vibration: Shock: Soldering Process; Solderability; Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. RoHS compliant lead free. See soldering profile on page 2. Solderability per Mil Std 883E Method 2003 Ordering Information: Example: XM-1-019.44M 50/50/-10 60/16 Consult the factory for additional Crystal specifications for this package. Package Outline Suggested Pad Layout 0.051 Max (1.3mm) 0.197 Max (5.0mm) 4 3 XM1 AD 19.44 0.295 Max (7.5mm) Bulletin Page Revision Date Xt266 1 of 2 00 15 Apr 2010 0.098 (2.5mm) 2 1 0.177 (4.5mm) 0.055 (1.4mm) 0.161 (4.1mm) 0.086 (2.2mm) 0.098 (2.5mm) 0.043 (1.1mm) (Top View) 0.040 Typ. (1.0mm) Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com Pad Connections :1: 2: 3: 4: Crystal Connection N/C (Cover) Crystal Connection N/C (Cover) Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Tape and Reel Information PIN 1 .69 (17.5mm) 8.46 DIA (216mm DIA) .08 (2.0mm) .31 .08 (7.9mm) (2.0mm) .21 (5.4mm) 9.84 DIA (250mm DIA) .157 (4.0mm) .08 (2.0mm) 3.15 (80mm) .315 (8.0mm) .06 DIA (1.5mm DIA) 1.00 DIA (25mm DIA) Bulletin Page Revision Date Xt266 2 of 2 00 15 Apr 2010 .295 (7.5mm) MEETS EIA-481A and EIAJ-1009B 2,000 PCS/REEL .07 (1.75mm) .83 (16.0mm) Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation