Available at Digi-Key www.digikey.com DOC-EVAL Eval Board Quick Start Guide 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Q U I C K S T A R T G U I D E Bulletin Page Revision Date Cx260-EVAL 1 of 1 P00 13 Aug 2014 General Instructions 1. Insert the unit into the eval board socket • Pin 1 of the socket is indicated by the “1” on the board silk-screen on the lower left. • Press the unit down firmly 2. Connect power • Connect the Vcc banana plug on the right to a +3.3V power supply capable of ~ 800mA of current. 3. Connect output: • Connect the “CMOS OUT” BNC J6 on the upper right to an oscilloscope or frequency counter input. Use a high impedance probe if possible. 4. Connect voltage control: • For DOC-series parts with voltage control (VCOCXO) option, connect “CV Input” BNC J5 on the upper left to a 1.65Vdc supply.