Series 3 • • • • Output rated at 3A @ 20-280 VAC DC control Zero-crossing (resistive loads) output Compact design ideal for replacing electromechanical relays PRODUCT SELECTION Control Voltage 120 VAC 240 VAC S312 S3012A S322 S3022A 3.5-8 VDC 3.5-8 VDC OUTPUT SPECIFICATIONS (1) Description S312 S3012A S322 S3022A Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 20-140 600 1 200 3 0.15 55 1.5 0.5 20-140 600 4 201 3 0.15 55 1.5 0.5 40-280 600 1 200 3 0.15 55 1.5 0.5 40-280 600 4 200 3 0.15 55 1.5 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn-On Voltage Minimum Turn-Off Voltage Nominal Input Impedance Typical Input Current @ 5 VDC Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 3.5-8 VDC 3.5 VDC 1.0 VDC 200 Ohm 20 mA 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 V DC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation 4000 Vrms 109 Ohm 8.0 pF -30 to 80°C -30 to 125 °C 0.6 oz (0.8g) Thermally conductive Epoxy GENERAL NOTES GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistance are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443, MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116949 CSA LR81689 VDE 10114 UG Rev. 120210 ANNEX - ENVIROMENTAL INFORMATION