TD2420Q Datasheet

Quad
• 4 Independent Relays in one package
• Industry standard package
• SCR output for heavy industrial loads
• DC Control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
PRODUCT SELECTION
Control Voltage
4-15 VDC
15-28 VDC
20A
TD2420Q
TD2420QE
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [VRMS]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current (3) [Arms]
Minimum Load Current [Arms]
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec]
Minimum Power Factor (with Maximum Load)
24-280
550
10
200
20
0.15
285/259
1.6
1.2
285/259
0.5
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Typical Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec] (4)
Maximum Turn-Off Time [msec]
4-15 VDC
4.0 VDC
1.0 VDC
12 mA @ 5Vdc
330 Ohm
1/2 cycle
1/2 cycle
15-28 VDC
15.0 VDC
1.0 VDC
15 mA @ 24Vdc
1500 Ohm
1/2 cycle
1/2 cycle
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Terminals
GENERAL NOTES
1) All parameters at 25°C and per section unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, max. 20A per section, max 60A per package.
4) Turn-on time for random turn-on versions is 0.1 msec
MECHANICAL SPECIFICATIONS
Parameters
2500 VRMS
109 Ohm
10 pF
-40 to 80°C
-40 to 125 °C
3.5 oz (109g)
Thermally conductive Epoxy
.25" Fastons, .025" Square Pins
THERMAL DERATE INFORMATION
WIRING DIAGRAM
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
E116949
LR81689
Rev. 012512
ANNEX - ENVIROMENTAL INFORMATION