SPA Series PRODUCT SELECTION Control Voltage 10-35 mA Description 1A 1A SPA4191 SPA6191 ol e OUTPUT SPECIFICATIONS (1) te • Mini-SIP SSR • Ratings to 1A @ 280 VAC • SCR output • DC control • Zero-crossing (resistive loads) output • 10-35mA current-control input Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms](3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 20-140 400 0.01 500 1.0 0.025 30 1.5 0.5 INPUT SPECIFICATIONS (1) Description bs Control Current Range Must Turn On Current Must Turn Off Current Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] DC Control 10-35 mA 10 mA 1 mA 1/2 cycle 1/2 cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) O Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation 1) All parameters at 25°C unless otherwise noted. 2) 2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Voltage Applied for 1 minute. Parameters 2500 Vrms 109 Ohm 8.0 pF -30 to 80°C -30 to 125°C 0.15 oz. (4.3g) Thermally Conductive Epoxy 20-280 600 0.01 500 1.0 0.025 30 1.5 0.5 MECHANICAL SPECIFICATIONS ol e te DC C ONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL bs THERMAL DERATE INFORMATION O AGENCY APPROVALS Rev. 120810 O te ol e bs O bs ol e te ANNEX - ENVIROMENTAL INFORMATION