Header & Housing SYSTEMs .8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm HHS SERIES Introduction: Adam Tech HHS Series of multiple pitch Headers and Housings are a matched set of Crimp Wire Housings and PCB mounted Shrouded Headers available in Straight, Right Angle or SMT orientation. Offered in various popular industry standard styles they provide a lightweight, fine pitched, polarized, high reliability connection system. Features: Multiple pitches and configurations Matched Housing & Header system Straight, Right Angle or SMT Headers Sure fit, Fine Pitched & Polarized Mating Connectors: Each set has a male and female mate ORDERING INFORMATION Crimp HOUSING Specifications: Material: Insulator: Thru-hole: PBT, glass reinforced, rated UL94V-0 SMT: Nylon 46 or 6T, rated UL94V-0 Contacts: Brass Plating: Tin over copper underplate overall Electrical: Operating voltage: 100V AC max. Current rating: 0.5 - 5 Amps max. Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 800V AC for 1 minute Mechanical: Insertion force: 1.28 lbs max Withdrawal force: 0.180 lbs min. B 2CH 04 POSITIONS SERIES INDICATOR 08CH= 0.80mm Single Row 1CH= 1.00mm Single Row 125CH = 1.25mm Single Row 15CH= 1.50mm Single Row 2CH= 2.00mm Single Row 2CH2= 2.0mm Dual Row 25CH= 2.50mm Single Row 02 Thru 15 BODY STYLE A thru W Temperature Rating: Operating temperature: -25°C to +85°C Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 ORDERING INFORMATION SHROUDED HEADER 2SH ORDERING INFORMATION Crimp Contact 2CTA SERIES INDICATOR 1CTA =1.00mm Body 125CTA =1.25mm Body 125CTB =1.25mm Body 125CTC=1.25mm Body 15CTA =1.50mm Body 15CTB = 1.50mm Body 2CTB = 2.00mm Body 2CTC = 2.00mm Body 25CTB = 2.50mm Body 25CTC = 2.50mm Body 248 Style Style Style Style Style Style Style Style Style Style “A” Contact “A” Contact “B” Contact “C” Contact “A” Contact “B” Contact “B” Contact “C” Contact “B” Contact “C” Contact R SERIES INDICATOR 08SH=0.80mm 1SH =1.00mm 125SH = 1.25mm 15SH = 1.50mm 2SH=2.0mm 25SH=2.50mm Packaging R = 10,000 Piece Reel B 04 TS PIN ANGLE IDC = Pre-installed crimp contacts TS = Straight PCB TR = Right Angle PCB POSITIONS 02 thru 25 BODY STYLE A thru W OPTIONS: Add designator(s) to end of part number SMT =Surface mount leads with Hi-Temp insulator www.adam-tech.com Header & Housing SYSTEMs 0.8mm & 1.00mm HHS SERIES 0.8mm Type A 08CH-A-XX-IDC 08sH-A-XX-TS-SMT 0.8mm IDC HOUSING with PRE-INSTALLED CONTACTS 0.8mm Vertical smt Header A .031 [0.80] .064 [1.65] .053 [1.36] .039 [1.00] .066 [1.70] .057 [1.45] 08cH-A-08-IDC B .057 [1.45] A .031 [0.80] 08sH-A-08-TS-SMT B .049 [1.25] .023 [0.60] .005 [0.15] .114 [2.90] .047 [1.20] .027 [0.70] .064 [1.65] .019 [0.50] .031 [0.80] Replace (XX) with No. of positions A=.031 [0.80] X No. of Positions -1 B=.031 [0.80] X No. of Positions + .031 [0.80] Replace (XX) with No. of positions A=.031 [0.80] X No. of Positions -1 B=.031 [0.80] X No. of Positions + .031 [0.80] Recommended PCB Layout 1.00mm Type A 1CH-A-xx 1CTA-R 1.00mm Crimp HOUSING 1.00mm Terminal .110 [2.80] .039 [1.00] 1CTA-R 1CH-A-04 .197 [5.00] .153 [3.90] .031 [0.80] A .019 [0.50] .082 [2.10] B .005 [0.15] .001 [0.05] .061 [1.55] .009 [0.25] .052 [1.34] .004[0.12] Replace (XX) with No. of positions A=.039 [1.00] X No. of Positions -1 B=.039 [1.00] X No. of Positions + .118 [3.00] .014 [0.38] Recommended wire size 32-28 awg. 1sH-A-xx-TS-SMT 1SH-A-xx-TR-SMT 1.00mm Vertical smt Header 1.00mm Right Angle smt Header .039 [1.00] .114 [2.90] .167 [4.25] .027 [0.70] 1SH-A-04-Ts-SMT .039 [1.00] .039 [1.00] A B .114 [2.90] .027 [0.70] A B 1SH-A-04-TR-SMT .167 [4.25] .114 [2.90] .047 [1.20] .167 [4.25] .104 [2.65] .027 [0.70] .078 [2.00] .061 [1.55] .039 [1.00] Recommended PCB Layout Replace (XX) with No. of positions A=.039 [1.00] X No. of Positions -1 B=.039 [1.00] X No. of Positions + .078 [2.00] www.adam-tech.com .039 [1.00] .218 .157 [5.55] [4.00] .027 [0.70] .047 [1.20] .039 [1.00] Replace (XX) with No. of positions A=.039 [1.00] X No. of Positions -1 B=.039 [1.00] X No. of Positions + .078 [2.00] .023 [0.60] .078 [2.00] Recommended PCB Layout 249 Header & Housing SYSTEMs 1.25mm Type A HHS SERIES 125CH-A-XX 125CTA-R 1.25mm Crimp HOUSING 1.25mm Crimp Terminal .153 [3.90] B .019 [0.50] .052 [1.34] .155 [3.95] .049 [1.25] .061 [1.55] .031 [0.80] .125 [3.20] .090 [2.30] A .009 [0.25] A .030 [0.77] 125CTA-R A 125CH-A-10 Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] .052 [1.34] .031 [0.79] B B .055 [1.40] .031 [0.80] A-A B-B Recommended wire size 32-28 awg. 125SH-A-XX-TS 125SH-A-XX-TR 1.25mm Vertical Header 1.25mm Right Angle Header .127 [3.25] .129 [3.30] .187 [4.75] .187 [4.75] .090 [2.30] A 125sH-A-04-TS .049 [1.25] .045 [1.15] B .049 [1.25] A ø.019 [0.50] 125sH-A-04-TR .086 [2.20] A .049 [1.25] ø.019 [0.50] A B Recommended PCB Layout Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] .049 [1.25] Recommended PCB Layout Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] 125SH-A-XX-TS-SMT .049 [1.25] 1.25mm Vertical SMT Header 125SH-A-XX-TR-SMT .011 [0.30] .049 [1.25] 1.25mm Right Angle SMT Header A B A B .133 [3.40] .133 [3.40] C C .163 [4.15] 125sH-A-04-Ts-SMT .049 [1.25] .011 [0.30] .141 [3.60] .023 [0.60] A .049 [1.25] .031X.063 [0.80 X 1.60] .082X.118 [2.10X3.00] Recommended PCB Layout 250 125sH-A-04-TR-SMT .163 [4.15] .141 [3.60] .023 [0.60] A .049 [1.25] .031X.063 [0.80 X 1.60] .082X.118 [2.10X3.00] Recommended PCB Layout www.adam-tech.com Header & Housing SYSTEMs 1.25mm Type B HHS SERIES 125CH-B-XX .049 [1.25] 125CTB-R 1.25mm Crimp HOUSING 1.25mm Crimp Terminal 125cTb-R A .053 [1.35] 125CH-B-10 A .090 [2.30] .041 [1.05] B B A .155 [3.95] .129 [3.30] .053 [1.35] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .017 [0.45] C=.049 [1.25] X No. of Positions + .068 [1.75] .049 [1.25] B-B A-A .125 [3.20] C .039 [1.00] .062 [1.60] B .035 [0.90] Recommended wire size 32-28 awg. 125SH-B-XX-TS 125SH-B-XX-TS-SMT 1.25mm Vertical header 1.25mm Vertical SMT header 125sH-B-04-TS-SMT .125 [3.20] .031 X .062 [0.80 X 1.60] .049 [1.25] .141 [3.60] B .023 [0.60] 125sH-B-04-TS B A A .165 [4.20] Recommended PCB Layout C A .086 [2.20] .049 [1.25] .049 [1.25] .011 [0.30] .165 [4.20] .011 [0.30] A ø.019 [0.50] Recommended PCB Layout Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] C A 125SH-B-XX-TR-SMT 1.25mm Right Angle SMT header .141 [3.60] 125SH-B-04-TR-SMT .061 [1.55] .019 [0.50] .102 [2.60] A .031 [0.80] .019 [0.50] .125 [3.20] .133 [3.40] www.adam-tech.com .031 [0.80] .049 [1.25] .118 [3.00] .057 [1.45] .165 [4.20] .183 [4.65] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] C=.049 [1.25] X No. of Positions + .202 [5.15] .009 [0.25] B .011 [0.30] .145 [3.70] .062 [1.60] .023 [0.60] .082 [2.10] Recommended PCB Layout Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .068 [1.75] C=.049 [1.25] X No. of Positions + .187 [4.75] 251 Header & Housing SYSTEMs 1.25mm Type C HHS SERIES 125CH-C-XX 125CTC-R 1.25mm Crimp HOUSING 1.25mm Crimp Terminal A .062 [1.60] B .049 [1.25] A .051 [1.30] B .090 [2.30] B .066 [1.70] A 125CH-c-05 .145 [3.70] .129 [3.30] .157 [4.00] .047 [1.20] A-A B-B .059 [1.50] .125 [3.20] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .065 [1.65] 125CTC-R .039[1.00] Recommended wire size 28-32 awg. 125SH-C-XX-TS 125SH-C-XX-TR 1.25mm Vertical Header 1.25mm Right angle Header .090 [2.30] A 125sH-c-05-Ts .133 [3.40] B 125sH-c-05-TR .049 [1.25] A .141 [3.60] B .169 [4.30] .049 [1.25] .177 [4.50] .212 [5.40] .090 [2.30] ø.019 [0.50] .049 [1.25] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .049 [1.25] .049 [1.25] ø.019 [0.50] Recommended PCB Layout 125SH-C-XX-TS-SMT 125SH-C-XX-TR-SMT 1.25mm Vertical SMT Header 1.25mm Right angle SMT Header .049 [1.25] .031 [0.80] .059 [1.50] A 125sH-c-06-Ts-SMT B ø.035 [0.90] C B .188 [4.80] .122 [3.10] A 125sH-c-08-TR-SMT C B .039 [3.60] B .196 [5.00] A .051[1.30] .027x.070 [0.70x1.80] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .065 [1.65] C=.049 [1.25] X No. of Positions + .124 [3.15] 252 Recommended PCB Layout Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .049 [1.25] .133 [3.40] ø.031 [0.80] .049 [1.25] .041 [1.05] .049 [1.25] Recommended PCB Layout .019[0.50] .059 [1.50] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .065 [1.65] C=.049 [1.25] X No. of Positions + .124 [3.15] www.adam-tech.com .027x.070 [0.70x1.80] A .041[1.05] Recommended PCB Layout Header & Housing SYSTEMS 1.25mm Type D & G HHS SERIES 125CH-D-XX 125CH-G 1.25mm Crimp HOUSING 1.25mm Crimp HOUSING .049 [1.25] .094 [2.40] 125sH-D-08 A .059 [1.50] .049 [1.25] A 125sH-G-08 B .047 [1.20] B .232 [5.90] .248 [6.30] CIRCUIT 1 Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .077 [1.95] .071 [1.80] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .057 [1.45] 125SH-D-XX-TR-smt 1.25mm Right angle SMT Header .043 [1.10] 125SH-G-XX-TR-SMT 1.2 5mm Right angle SMT Header .049 [1.25] .224 [5.70] .098 [2.50] B .094 [2.40] A .049 [1.25] .209 [5.30] C Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 .102X.079 [2.60X2.00] B .077 [1.95] .132X.051 [3.35X1.30] Replace (XX) with No. of positions A=.049 [1.25] X No. of Positions -1 B=.049 [1.25] X No. of Positions + .252 [6.40] PCB Layout 125CTD-R 125CTG-X-R 1.25mm Crimp TERMINAL 1.25mm Crimp TERMINAL Recommended wire size 28-32 awg. 125CTD-R .087 [2.20] .049 .096 [1.25] [2.45] .039 [1.00] Recommended PCB Layout B=.049 [1.25] X No. of Positions + .244 [6.20] C=.049 [1.25] X No. of Positions + .205 [5.20] 125sH-G-03-TR-SMT .217 [5.50] .102 [2.60] .043 [1.10] .075 [1.90] A 125sH-D-06-TR-SMT Recommended wire size 28-32 awg. 125CTG-R B A .059 [1.50] .067 [1.70] A B B A .037 [0.95] A-A C .037 [0.95] .067 [1.70] B SECTION A–A .220 [5.60] .197 [5.00] .028 [0.70] C .059 [1.50] A .006 [0.15] .043 [1.10] .024 [0.60] .118 [3.00] .047 [1.20] .020 [0.50] .063 [1.60] .035 [0.90] C-C .012 [0.30] www.adam-tech.com .110 [2.80] SECTION B–B 253 Header & Housing SYSTEMs 1.5mm Type A HHS SERIES 15CH-A-XX 15CTA-R 1.5mm Crimp HOUSING 1.5mm Crimp Terminal .133 [3.40] B .066 [1.70] A B .177 [4.50] .062 [1.60] B .059 [1.50] .047 [1.20] A-A A .104 [2.65] .047 [1.20] B-B .033 [0.84] .057 [1.45] A 15CH-A-10 Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 B=.059 [1.50] X No. of Positions + .059 [1.50] Recommended wire size 26-30 awg. 15SH-A-XX-TS A .019 [0.50] .157 [4.00] 1.5mm Right angle Header .137 [3.50] .236 [6.00] 15sH-A-04-TS B .197 [5.00] A .106 [2.70] .059 [1.50] .019 [0.50] .059 [1.50] .103 [2.70] .019 [0.50] ø.027 [0.70] Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 B=.059 [1.50] X No. OF SPACES +.059 [1.50] .196 [5.00] .055 [1.40] A Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 B=.059 [1.50] X No. OF SPACES +.118 [3.00] 15SH-A-XX-TR-SMT 1.5mm Vertical SMT Header 1.5mm Right angle SMT Header .236 [6.00] .059 [1.50] 15sH-A-04-TR-SMT . 019 [0.50] Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 C=.059 [1.50] X No. of Positions + .118 [3.00] .137 [3.50] .059 [1.50] .059 [1.50] .090 [2.30] .145 [3.70] .060 [1.50] 254 .055 [1.40] B .090 [2.30] A Recommended PCB Layout 15SH-A-XX-TS-SMT 15sH-A-04-TS-SMT B .059 [1.50] .181 [4.60] Ø.027 [0.70] Recommended PCB Layout .145 [3.70] 15sH-A-04-Tr .145 [3.70] .177 [4.50] .059 [1.50] .040 [1.04] 15SH-A-XX-TR B 1.5mm Vertical Header 15cTA-R .137 [3.50] .027 [0.70] A Recommended PCB Layout Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 C=.059 [1.50] X No. of Positions + .118 [3.00] www.adam-tech.com .027 [0.70] Recommended PCB Layout Header & Housing SYSTEMs 1.5mm Type B & 2.00mm Type B HHS SERIES 1.5mm Type B 15CH-B-XX 15CTB-R .033 [0.85] 1.5mm Crimp HOUSING .059 [1.50] A .106 [2.70] B A 15CH-B-05 .224 [5.70] Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 B=.059 [1.50] X No. of Positions +.043 [1.10] 15CTB-R .027 [0.70] .055 [1.40] .082 [2.10] .059 [1.30] .082 [2.10] .042 [1.07] B-B A-A Recommended wire size 28-24 awg. 15SH-B-XX-TS-SMT B 1.5mm Vertical SMT Header 15SH-B-XX-TR-SMT A 1.5mm Right angle SMT Header A 15sH-B-04-ts-smt .059 [1.50] 15sH-B-04-tR-smt .033 [0.85] .175 [4.45] .175 [4.45] .275 [7.00] .226 [5.75] .196 [5.00] B .295 [7.50] .131 [3.35] B .059 [1.50] .208 [5.30] A B 1.5mm Crimp Terminal .236 [6.00] .059 [1.50] A Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions-1 B=.059 [1.50] X No. of Positions +.051 [1.30] Recommended PCB Layout .226 [5.75] .196 [5.00] .139 [3.55] .275 [7.00] .033 [0.85] .236 [6.00] .059 [1.50] Replace (XX) with No. of positions A=.059 [1.50] X No. of Positions -1 B=.059 [1.50] X No. of Positions +.051 [1.30] A Recommended PCB Layout 2mm Type B A 2CH-B-XX B .177 [4.50] A .138 [3.50] 2sH-B-10-TS .079 [2.00] Recommended Layout PCB Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.078 [2.00] B-B 2SH-B-XX-TR .134 [3.40] 2sH-B-10-tr .303 [7.70] .240 [6.10] Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.078 [2.00] www.adam-tech.com 2mm Right angle Header .079 [2.00] .197 [5.00] B ø.031 [0.80] .134 [3.40] .059 [1.50] Recommended wire size 28-22 awg. B .185 [4.70] A-A .061 [1.55 A 2mm Vertical Header .240 [6.10] .020 [0.50] .079 [2.00] .077 [1.95] .084 [2.13] .057 [1.45] 2SH-B-XX-TS .091 [2.30] .040 [1.02] .067 [1.70] 2cH-B-10 B A .079 [2.00] 2ctB-R .201 [5.10] .232 [5.90] Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.063 [1.60] 2mm Crimp TERMINAL B A .079 [2.00] 2CTB B 2mm Crimp HOUSING .246 [6.25] B ø.031 [0.80] Recommended PCB Layout 255 Header & Housing SYSTEMS 2.0mm Type C HHS SERIES A .079 [2.00] 2CH-C-XX 2CTC-R 2mm Crimp HOUSING 2mm Crimp Terminal .13 4 [3.40] A B A B .087 [2.20] .063 [1.60] 2CH-c-10 .110 [2.80] .067 [1.70] B-B A-A .250 [6.35] .270 [6.86] .230 [5.85] .082 [2.08] .177 [4.50] B Positions: 2 thru 20 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions + .071 [1.80] Recommended wire size 28-22 awg. 2SH-C-XX-TS A 2SH-C-XX-TR .079 [2.00] 2mm Vertical Header 2mm Right angle Header .130 [3.30] .073 [1.85] .067 [1.70] .185 [4.70] B 2sH-c-10-tr 2sH-c-10-ts .197 [5.00] B .240 [6.10] .134 [3.40] .079 [2.00] ø.031 [0.80] Positions: 2 thru 20 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions + .082 [2.10] PCB Layout .242 [6.14] .303 [7.70] B .020 [0.50] A 2mm Vertical SMT Header .079 [2.00] .197 [5.00] .079 [2.00] .063 [1.60] B 256 .039 [1.00] .295 [7.50] .063x.118 [1.60x3.00] ø.031 [0.80] PCB Layout 2SH-C-XX-TR-smt 2mm Right angle SMT Header .079 [2.00] .063 [1.60] .102 [2.60] .079 [2.00] .086 [2.20] Positions: 2 thru 16 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions + .153 [3.90] B 2sH-c-10-tR-smt 2sH-c-10-ts-smt .260 [6.60] .246 [6.25] Positions: 2 thru 20 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions + .082 [2.10] 2SH-C-XX-TS-smt A 2Ctc-r .059 [1.50] .051 [1.30] A .079 [2.00] .037 [0.95] .039x.217 [1.00x5.50] PCB Layout B .236 [6.00] .217 [5.50] Positions: 2 thru 16 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions + .153 [3.90] www.adam-tech.com B .220 [5.60] .059x.134 [1.50x3.40] .039x.137 [1.00x3.40] PCB Layout Header & Housing SYSTEMS 2.0mm Type D & F HHS SERIES 2mm Type D C B A 2CH-D-XX 2CTD-R 2.0mm Crimp HOUSING 2.0mm Crimp TERMINAL B .079 [2.00] .157 [4.00] 2CH-D-03 .201 [5.10] .173 [4.40] B A 2CtD-r A .079 [2.00] .091 [2.30] .075 [1.90] .075 [1.90] Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Spaces B = .079 [2.00] x No. of Spaces + .110 [2.80] C = .079 [2.00] x No. of Spaces + .157 [4.00] .079 [2.00] A-A B-B Recommended wire size 26-30 awg 2SH-D-XX-TS 2.0mm Vertical Header 2SH-D-XX-TR .079 [2.00] Ø.023 [0.60] .157 [4.00] 2.0mm Right angle Header .157 [4.00] A A B 2sH-D-03-ts Ø.031 [0.80] .126 [3.20] Ø.023 [0.60] .267 [6.80] B .267 [6.80] .063 [1.60] .346 [8.80] .079 [2.00] Recommended PCB Layout Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Spaces B = .079 [2.00] x No. of Spaces + .152 [3.85] 2sH-D-03-tr .067 [1.70] Ø.031 [0.80] .079 [2.00] .114 Positions: 2 thru 15 [2.90] Replace (XX) with No. of positions A = .079 [2.00] x No. of Spaces B = .079 [2.00] x No. of Spaces + .152 [3.85] Recommended PCB Layout 2mm Type F 2CTF-R 2CH-F-XX 2.0mm Crimp HOUSING A .079 [2.00] B A 2.0mm Crimp TERMINAL .059 [1.50] B A .132 [3.35] 2CH-F-05 .059 [1.50] B .079 [2.00] .228 [5.80] Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Spaces B = .079 [2.00] x No. of Spaces + .114 [2.90] 2CTF-R .193 [4.90] .043 [1.10] .075 [1.90] .083 [2.10] .150 [3.80] A-A .051 [1.30] B-B Recommended wire size 26-30 awg www.adam-tech.com 257 Header & Housing SYSTEMS 2.0mm Type F & H HHS SERIES 2mm Type F A 2SH-F-XX-TS .079 [2.00] 2SH-F-XX-TR 2mm Vertical Header .234 [5.95] B .171 [4.35] B 2mm Right angle Header .299 [7.60] 2SH-F-05-TS .183 [4.65] Ø.035 [0.90] .138 [3.50] .079 [2.00] .024 [0.60] .024 [0.60] .065 [1.64] Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.157 [4.00] Recommended PCB Layout 2SH-F .138 [3.50] A .230 [5.85] Ø.035 [0.90] .079 [2.00] .262 [6.65] .079 [2.00] Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.157 [4.00] Recommended PCB Layout 2mm Type H Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.035 [0.90] 2CH-H-XX 2CTH-R 2mm Crimp HOUSING A .079 [2.00] A A B B .260 [6.60] .128 [3.25] 2CH-H-05 .228 [5.80] .177 [4.50] A-A B-B Recommended wire size 26-30 awg Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.078 [2.00] 2SH-H-XX-TS 2mm Vertical Header WITH PEG Positions: 2 thru 15 Replace (XX) with No. of positions A = .079 [2.00] x No. of Positions -1 B = .079 [2.00] x No. of Positions +.078 [2.00] A .461 [11.70] .209 [5.30] .067 [1.70] .303 [7.70] .059 [1.50] Ø.030 [0.75] .079 [2.00] .240 .323 [6.10] [8.00] 2SH-H-05-TS .059 [1.50] .067 [1.70] A Ø.043 [1.10] Ø.030 [0.75] A B Recommended PCB Layout www.adam-tech.com 2SH-H-XX-TR 2mm Right angle Header .134 [3.40] .079 [2.00] .118 [3.00] B 258 .061 [1.55] .059 [1.50] .096 [2.45] B .079 [2.00] 2CTH-r .075 [1.90] .315 [8.00] .287 [7.30] 2mm Crimp Terminal .008 [0.20] .079 [2.00] 2SH-H-05-TR .059 [1.50] .083 [2.10] A Ø.047 [1.20] Recommended PCB Layout Header & Housing SYSTEMS 2.0mm & 2.5mm Type J & E HHS SERIES 2mm Type J Positions: 2 thru 18 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.157 [4.00] 2SH-J-XX-TS 2.0mm Vertical Header Positions: 2 thru 18 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.157 [4.00] A .222 [5.65] A .144 [3.65] 2SH-J-XX-Tr 2.0mm Right angle Header .165 [4.20] 2SH-J 2SH-J .138 [3.50] B .020 [0.50] .079 [2.00] .217 [5.50] B .138 [3.50] .079 [2.00] Ø.031 [0.80] .020 [0.50] Ø.031 [0.80] Recommended PCB Layout Recommended PCB Layout 2.5mm Type E Positions: 2 thru 18 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.130 [3.30] C = .098 [2.50] x No. of Positions +.193 [4.90] A 25CH-E-XX 25cte-r 2.0mm Crimp HOUSING A A .098 [2.50] B .153 [3.90] B .285 [7.25] D D .043 [1.10] .354 [9.00] Positions: 2 thru 18 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.197 [5.00] .067 [1.70] .079 [2.00] .185 [4.70] 25CTE-R .089 [2.25] 25CH-E-05 B C 2.0mm Crimp TERMINAL .008 [0.20] D-D .087 [2.20] .091 [2.30] .071 [1.80] .059 [1.50] B-B A-A Recommended wire size 22-28 awg 25SH-E-XX-TS 2.0mm Vertical Header Positions: 2 thru 18 Replace (XX) with No. of positions A A 25SH-E-XX-TR 2.0mm Right angle Header A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.197 [5.00] Ø.028 [0.70] A .193 [4.90] .193 [4.90] 25SH-E-F-05 .098 [2.50] .098 [2.50] B A .098 [2.50] 25SH-E-05-TR Ø.035 [0.90] PCB Layout B Ø.035 [0.90] .232 [5.90] .138 [3.50] Ø.028 [0.70] Recommended PCB Layout www.adam-tech.com .232 .311 [5.90] [7.90] .260 [6.60] .138 [3.50] 259 Header & Housing Sets 2.5mm Type B & C HHS SERIES 2.5mm Type B 25CH-B-XX B .303 [7.70] A .098 [2.50] .267 [6.80] B .074 [1.90] Positions: 2 thru 20 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions + .189 [4.80] .068 [1.75] .061 [1.55] .025 [0.65] 25SH-B-XX-TS B-B A B .126 [3.20] A-A 25SH-B-XX-TR .025 [0.64] .098 [2.50] 2.5mm Right angle Header 2.5mm Vertical Header .226 [5.75] .112 [2.85] .090 [2.30] .161 [4.10] .098 [2.50] 25CTB-R .079 [2.02] .055 [1.40] 25CH-B-03 .220 [5.6] 2.5mm Crimp TERMINAL A B A 25BTC-R .041 [1.05] 2.5mm Crimp HOUSING .224 [5.70] .226 [5.75] .275 [7.0] .453 [11.50] 25SH-B-03-TS .133 [3.40] .098 [2.50] ø.039 [1.00] .025 [0.64] Positions: 2 thru 20 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions + .102 [2.60] A B A PC B Layout 25SH-B-03-TR .098 [2.50] ø.039 [1.00] .139 [3.40] Positions: 2 thru 20 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions + .102 [2.60] Wire sizes 28-24 awg. A PCB Layout 2.5mm Type C 25CH-C-XX A 2.5mm Crimp HOUSING .098 [2.50] 25CTC-R .077 [1.95] B-B A .150 [3.80] B .280 [7.10] .255 [6.50] A 25CH-C-05 B 25CTC-R B .084 [2.13] .057 [1.45] 25SH-C-XX-TS A 2.5mm Vertical Header .098 [2.50] .102 [2.60] .061 [1.55 A-A 25SH-C-XX-TR A 2.5mm Right angle Header .125 [3.20] .150 [3.80] .165 [4.20] B B .236 [6.00] .025 [0.64] 25SH-C-04-TS .039 [3.20] Positions: 2 thru 15 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.198 [2.50] 260 .091 [2.30] .040 [1.02] .201 [5.10] .067 [1.70] Positions: 2 thru 20 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions + .178 [2.00] .098 [2.50] 2.5mm Crimp TERMINAL .059 [1.50] .098 [2.50] ø.039 [1.00] .236 [6.00] A PCB Layout Positions: 2 thru 15 Replace (XX) with No. of positions A = .098 [2.50] x No. of Positions -1 B = .098 [2.50] x No. of Positions +.198 [2.50] www.adam-tech.com .263 [6.70] 25SH-C-04-TR .098 [2.50] ø.039 [1.00] A PCB Layout Header & Housing SetS .100" [2.54] CENTERLINE SINGLE & DUAL ROW HHS SERIES MTE Dual Row Single Row .100 [2.54] A B A .100 [2.54] B .100 [2.54] .100 [2.54] .200 [5.08] .100 [2.54] .555 [14.10] .555 [14.10] MTF-14 MTE-08 A = .100 [2.54] X No. of SPACES B = .100 [2.54] X No. of SPACES + .200 [5.08] MTE-C Crimp Contact A A B .100 [2.54] .070 [1.78] B .100 [2.54] .090 [2.30] MTE-C-R .472 [12.00] Section A - A .180 [4.60] .070 [1.80] .060 [1.50] Section B - B Recommended wire size 28-22 awg. ORDERING INFORMATION HOUSING MTE SERIES INDICATOR MTE = Single row housing MTF= Dual row housing CRIMP CONTACT 10 MTE-C POSITIONS Single row (MTE) 02-40 SERIES INDICATOR MTE-C = Crimp contact R PACKAGING R=6,000 pieces on reel Positions Dual row (MTF) 04-80 Positions www.adam-tech.com 261