Battery Holders & Snaps Alkaline, LITHIUM, mobile & snaps BH & BS Series Introduction: Adam Tech BH and BS series Battery Holders, Mobile Battery Connectors and Battery Snaps are designed to contain batteries in electronic equipment. This series includes battery holders and coin cell holders for AAA, AA, C, D, 9V and lithium coin cells. Adam Tech produces this series in a variety of terminations such as thru-hole PCB leads, SMT leads, wire leads and solder lugs. Custom lead lengths on wired configurations are also available. Our superior retention holders are molded of UL94-VO or UL94-HB material with spring steel contacts and perform extremely well under normal or adverse environment conditions. Battery holder Specifications: Material: Insulator: Impact resistant Polypropylene, rated UL94-HB 9V Holder, ABS, Glass filled rated UL94-HB Insulator Color: Black Spring: Spring Steel, Nickel plated Contacts: Spring steel, Nickel plated Snap terminals: Brass, Nickel plated Wire: 26 Awg, PVC Electrical: Operating voltage: 1.5V to 9V DC max. Temperature Rating: Operating temperature: -55°C to +85°C ORDERING INFORMATION Battery holder BH 01 SERIES INDICATOR BH= Battery Holder Battery Snaps Specifications: TYPE 01 thru 41 Material: Soft PVC or rigid PP or PE Snap terminals: Brass, nickel plated Wire: 26 Awg stranded, UL1007, PVC insulation Electrical: Operating voltage: 9V max. termination 1=PCB Thru Hole 2=Male/Female Snaps 3=Solder Terminals 4 =Wire Leads 5.90 [150.00] 5=SMT Battery Snaps Temperature Rating: Operating temperature: -55°C to +85°C BS 1 1 SERIES INDICATOR BS = Battery Snap TYPE 1 thru 6 LEADS 1 = Standard length 2 = Special length coin CEll Holder & mobile battery connector Specifications: Material: Thru-hole: PBT Thermoplastic rated UL-94-VO SMT: Hi-Temp Thermoplastic rated UL-94-VO Electrical: Operating voltage: 9V max. Temperature Rating: Operating temperature: -55°C to +85°C 3 Mobile Battery connector Safety Agency Approvals: Manufactured with UL Recognized and CSA Certified Materials MBC A SERIES INDICATOR MBC = Mobile Battery Connector TYPE A thru M www.adam-tech.com 2 POSITIONS 2 thru 6 383 Battery Holders Alkaline - AA, AAA, C, D & 9V BH Series bh-01-3 BH-01 bh-13-3 1 Cell "AA" Length:2.41" Width:.900" Height:2.21" Length:2.25" Height:.580" Width:.650" bh-03-3 BH-03 bh-14-3 2 Cell "AA" bh-05-3 BH-05 bh-21-3 4 Cell "AA" BH-21 6 Cell "D" Length:2.68" Height:1.13" Width:2.85" Length:2.28" Height:1.10" Width:1.22" bh-08-3 BH-08 bh-22-3 BH-22 8 Cell "D" 8 Cell "AA" Length:5.15" Height:2.58" Width:2.78" Length:4.24" Height: 1.22" Width: 1.10" bh-10-3 384 BH-14 4 Cell "C" Length:4.30" Height:1.01" Width:2.10" Length:2.26" Height:.590" Width:1.23" Length:2.06" Height:.500" Width:.970" BH-13 2 Cell "C" BH-10 bh-24-3 2 Cell "AAA" Length:2.13" Height:.820" Width:1.19" www.adam-tech.com BH-24 "9 Volt" Battery Holders lithium Coin Cell Battery holders BH Series BH-25-1 BH-26-1 Coin Cell Battery Holder Ø.040 Coin Cell Battery Holder [1.02] Ø.040 .807 Ø.040 Ø.040 [1.02] Ø.040 [1.02] [20.50] [1.02] Ø.040 [1.02] .807 [1.02] .807 .807 [20.50] .807 [20.50] [20.50] .807 [20.50] [20.50] Recommended PCB Layout .130 [3.30] .130 .130 .130 [3.30] .130[3.30] [3.30] .130 [3.30] [3.30] .630 [16.00] bh-25-1 .630 Ø.900 .630 .630 [16.00] [22.80] .630 [16.00] [16.00] .630 Ø.900 [16.00] 1.122 [16.00] Ø.900 Ø.900 [22.80] [28.50] Ø.900 .212 [22.80] bh-26-1 [22.80] Ø.900 1.122 [5.40] [22.80] 1.122 1.122 [22.80] Ø.748 [28.50] .212 1.122 [28.50] .100 [28.50] [19.00] 1.122 .212 .212 [5.40] .807 Ø.039 [28.50] [2.54] .212[5.40] [5.40] Ø.748 [28.50] [20.50] .212 [1.00] [5.40] .100 Ø.748 Ø.748 [19.00] [5.40] .100 .807 .100 Ø.748 Ø.039 [19.00] [2.54] [19.00] Ø.748 .807 .807 .100[2.54] .138 [3.50] Ø.039 Ø.039 .256 [6.50] [20.50] [2.54] [19.00] [1.00] .100 .807 [20.50] [19.00] Ø.039 [20.50] [1.00] [2.54] .807 Ø.039 [2.54][1.00] [20.50] 1.060 1.06 [26.90] [1.00] .138 [3.50] [20.50] .256 [6.50] [1.00] .138 [3.50] .256 [6.50] .138 [3.50] [26.90] .256 [6.50] .256 [6.50] .138 [3.50] .256 [6.50] 1.060 1.06 [26.90] .138 [3.50] .256 [6.50] 1.06 [26.90] 1.060 1.060 1.06 [26.90] [26.90] .256 [6.50] 1.060 1.06 [26.90] [26.90] Recommended PCB[26.90] Layout .256 [6.50] .256 [6.50] 1.060 1.06 [26.90] .126 [26.90] .256 [6.50] [26.90] .256 [6.50] .441 [3.20] [11.20] .126 1.260 .126 .126 .441 [3.20] .220 [32.00] .126[3.20] BH-27-5 BH-41A-1 .441 .441 [3.20] [11.20] .126 [5.60] 1.260 [11.20] .441 [3.20] [11.20] 1.260 .441 [3.20] 1.260 Coin Cell Battery Holder Coin Cell Battery Holder .220 [32.00] [11.20] 1.260 .220 [32.00] [11.20] .220 [32.00] [5.60] 1.260 .295 .220[5.60] [32.00] .382 [5.60] [32.00] .630 [7.50] .256[5.60].220 [9.70] [16.00] [5.60] .295 [6.50] .295 .382 .630 .295 [7.50] .256 .382 .382 .630 .630 .295[7.50] [16.00] .256 [7.50] .256[9.70] Ø.039 .295 .382[9.70] .630 [6.50] [16.00] [9.70] [16.00] .630 [7.50] .256 [6.50] 1.122 [1.00] [7.50][6.50] .256[9.70].382 [16.00] [9.70] [16.00] [6.50] Ø.039 [28.50] [6.50] .212 Ø.039 Ø.039 1.122 [1.00] .213 [5.40] Ø.039 1.122 [1.00] 1.122 [1.00] Ø.039 [28.50] [5.40] 1.122 [1.00] [28.50] .212 [28.50] .173 1.122 [1.00] .212 .213 Ø.512 .212 [5.40] [28.50] .213 bh-41A-1 [28.50] .213 [4.40] .212[5.40] [5.40] A [5.40] [13.00] .212 .213 .173 Recommended PCB Layout .433 [11.00] [5.40] [5.40] [5.40] .213 Ø.512 [5.40] .173 .173 [5.40] [4.40] Ø.512 Ø.512 A [5.40] [13.00] .173[4.40] .275 [7.00] [4.40] A Ø.512 .173 [13.00] A .433 [11.00] [13.00]Ø.512 [4.40] .433 [11.00] .102 [2.60] A .433 [11.00] [13.00] [4.40] Ø.591 A [13.00] .275 [7.00] .433 [11.00] [15.00] .275 [7.00] .433 [11.00] .275 [7.00] .102 [2.60] .137 [3.50] Ø.591 .275 [7.00] .102 [2.60] .102 [2.60] .275 [7.00] Ø.591 Ø.591 [15.00] .102 [2.60] Ø.591 [15.00] .102 [2.60] .137 [3.50] [15.00] 1.153 Ø.591 .137 [3.50] .137 [3.50] [15.00] [29.30] [15.00] A .137 [3.50] .137 [3.50] 1.153 A 1.153 1.153 [29.30] A A 1.153 [29.30] [29.30] 1.153 A [29.30] A [29.30] .126 bh-27-5 .441 Recommended PCB Layout [3.20] [11.20] .126 .787 .441 .126 .126 .220.441 .441[3.20] .126 [20.00] [11.20] BH-41B-1 BH-32-1 [3.20] .441 [3.20] [11.20] .126 [11.20] .441 .787 [5.60] [3.20] [11.20] .787 .787 Coin Cell Battery HoldeR Coin Cell Battery Holder [3.20] .220 [20.00] [11.20] .787 [20.00] .220 .220 [20.00] [5.60] .787 .295 .220[5.60] [20.00] Ø.083 .382 [5.60] [20.00] [7.50] .256[5.60].220 [2.12] [9.70] [5.60] .295 [6.50] Ø.083 .382 .295 .295 [7.50] .256 Ø.083 Ø.083 .382 .382 [2.12] [9.70] .295[7.50] .256 .256 [7.50] Ø.039 Ø.083 .295 .382 [2.12] [6.50] [9.70] [2.12] [9.70] .382 Ø.083 [7.50] .256 [6.50] [1.00] [7.50][6.50] .256 [9.70] [2.12] [2.12] [9.70] [6.50] Ø.039 [6.50] Ø1.053 Recommended PCB Layout Ø.039 Ø.039 .315 [1.00] [26.75] Ø.039 [1.00] [1.00] Ø.039 [8.00] bh-41B-1 Ø1.053 [1.00] .276 .315 [1.00]Ø.512 Ø1.053Ø1.053 [26.75] [7.00] .315 .315 Ø1.053 [26.75] [8.00] bh-32-1 [26.75] A Ø1.053 Recommended PCB Layout [13.00] .315[8.00].276 [8.00] [26.75] .315 .276 .276 [26.75] Ø.512 [8.00] [7.00] [8.00] [7.00] .276[7.00] Ø.512 Ø.512 A [13.00] .276 A [13.00] 1.141 Ø.512 [13.00] A [7.00] Ø.512 [7.00] [29.00] A [13.00] .787 Ø.591 A [13.00] 1.141 [20.00] .629 1.141 [15.00] 1.141 [29.00] .787 Ø.591 [15.97] 1.141 [29.00] [29.00] .787 .787 Ø.591 Ø.591 [20.00] .6291.141 [15.00] [29.00] .787 [20.00] Ø.591 .629 [15.00] [20.00] .629 [15.00] [29.00] .787 [15.97] Ø.591 [20.00] .629 [15.00] [15.97] [15.97] [20.00] .629 [15.00] A .374 .425 [15.97] [15.97] [9.50] [10.80] A .374 .425 A A .425 .374 .374 .425 [9.50] [10.80] A .374[9.50] .425 A [10.80] [9.50] [10.80] .374 .425 [9.50] [10.80] [9.50] [10.80] www.adam-tech.com 385 9 VOLT BATTERY SNAPS BS Series .531 [13.5] 1.02 [26.0] BS-1 .508 [12.9] 1.10 [28.0] SOFT PVC SOFT PVC 5.90 [150.0] 5.90 [150.0] 26 AWG 26 AWG .157 [4.0] STRIPPED .157 [4.0] STRIPPED 1.02 [26.0] .508 [12.9] BS-3 .512 [12.9] SOFT PVC .508 [12.9] .708 [18.0] SOFT PVC 5.90 [150.0] 26 AWG 26 AWG .157 [4.0] STRIPPED .157 [4.0] STRIPPED .531 [13.5] .315 [8.0] .508 [12.9] BS-5 BS-6 1.02 [26.0] .315 [8.0] .508 [12.9] .512 [13.0] 1.06 [27.0] RIGID PVC 5.90 [150.0] 26 AWG .157 [4.0] STRIPPED 386 BS-4 1.02 [26.0] 5.90 [150.0] RIGID PVC BS-2 .508 [12.9] 5.90 [150.0] 26 AWG .157 [4.0] STRIPPED www.adam-tech.com MOBILE BATTERY CONNECTOR BS SERIES .098 [2.50] B B .039 [1.00] MBC-B .047 [1.20] .065 [1.65] 2.5mm RIGHT ANGLE SMT .098 [2.50] A Recommended PCB Layout MBC-B-4 .118 [3.00] POSITIONS AVAILABLE: 2, 3, 4 & 5 A = .098 [2.50] X NO. OF POSITIONS B = .098 [2.50] X NO. OF SPACES .318 [8.10] B MBC-C .047 [1.20] 2.54mm RIGHT ANGLE SMT .130 [3.30] .100 [2.54] .161 [4.10] B .165 [4.20] .142 [3.60] .075 [1.90] .100 [2.54] Recommended PCB Layout .236 [6.00] A MBC-C-4 POSITIONS AVAILABLE: 4 & 6 A = .100 [2.54] X NO. OF POSITIONS B = .100 [2.54] X NO. OF SPACES MBC-K-4 .157 [4.00] .059 [1.50] .098 [2.50] .220 [5.60] .179 [4.55] .098 [2.50] .172 [4.368] .197 [5.00] .177 [4.50] 2.50mm vertical SMT .026 [0.65] .157 [4.00] .079 [2.00] .413 [10.50] .413 [10.50] .197 [5.00] .035 [0.90] .030 [0.75] MBC-K-4 Recommended PCB Layout MBC-M-2 .185 [4.70] 2.50mm vertical SMT .004 [0.10] .197 [5.00] .098 [2.50] .110 [2.80] .217 [5.50] .177 [4.50] .116 [2.95] .035 X .079 [0.89 X 2.00] .150 [3.80] .116 [2.95] .035 X .079 [0.89 X 2.00] .049 [1.25] Ø.035 [0.90] MBC-M-2 .098 [2.50] Recommended PCB Layout www.adam-tech.com 387