0.80mm SUB-MICRO HEADERS
1.00mm MICRO HEADERS
Adam Technologies, Inc.
.031" [0.80] & .039" [1.00] CENTERLINE
MPH & SPH / MRS & SRS
INTRODUCTION:
Adam Tech 0.8mm and 1.00mm Pin Header and Female Header
series is a fine pitch, low profile, dual row, PCB mounted connector
set intended for limited space applications or where total weight is a
factor. Our specially tooled insulators and contacts maintain
consistent high quality through our automated production processes.
Each series is available in thru-hole PCB or SMT mounting and
plated tin, gold or selective gold as specified.
FEATURES:
0.8mm and 1.0mm versions
Pin Header and Female Header set
Lightweight and Compact
Hi Temp Insulators
0.8mm MALE ORDERING INFORMATION
20
SPH2
20
Pb
240
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
SRS2 = 0.8mm
Dual Row
Female
Header
POSITIONS
04 thru 80
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
1.0mm MALE ORDERING INFORMATION
20
MPH2
SG
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
MPH2 = 1.0mm
Dual Row
Pin Header
POSITIONS
04 thru 80
20
MRS2
APPROVALS AND CERTIFICATIONS:
UL Recognized File No. E224053
CSA Certified File No. LR1578596
®
SG
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
1.0mm FEMALE ORDERING INFORMATION
PACKAGING:
Anti-ESD plastic bags or tubes
UL
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
0.8mm FEMALE ORDERING INFORMATION
SRS2
SPECIFICATIONS:
Material:
Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Ratings:
Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds
(260°C for 10 seconds)
Soldering process temperature: 260°C
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
SERIES
INDICATOR
SPH2 = 0.8mm
Dual Row
Header
POSITIONS
04 thru 80
MATING OPTIONS:
Mates with all industry standard 0.8mm & 1.0mm pitch headers and
female headers
SG
®
®
RoHS
V
E
DCOMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
AVA I L A B L E
SERIES
INDICATOR
MRS2 = 1.0mm
Dual Row
Female
Header
POSITIONS
04 thru 80
SG
SMT
MOUNTING
Blank = Thru-hole
SMT = Surface
mount
PLATING
U = Gold plated
SG = Selectively gold plated
T
= Tin plated
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
RoHS
COMPLIANT
0.8mm SUB-MICRO HEADERS
1.00mm MICRO HEADERS
Adam Technologies, Inc.
.031" [0.8] & .039" [1.00] CENTERLINE
MPH & SPH / MRS & SRS
0.8mm SUB-MICRO HEADERS
A
B
A
B
A
A
.120
[3.05]
.120
[3.05]
.078 [2.00]
SPH2-60-UA
B
.031 [0.80]
B
.031 [0.80]
.047
[1.20]
.047
[1.20]
SRS2-60-UA
.031 [0.80]
.031 [0.80]
.118
[3.00]
.118
[3.00]
.039 [1.00]
.078 [2.00]
.039 [1.00]
.012 [0.30] SQ.
.012 [0.30] SQ.
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces Per Row
A
B
A
B
.120
[3.05]
.120
[3.05]
0.8mm Male Header
SPH2 Series
SPH2-60-UA-SMT
.047
[1.20]
.047
[1.20]
.051 [1.30]
.031 [0.80]
.078 [2.00]
.047
[1.20]
.047
[1.20]
.031 [0.80]
.039 [1.00]
.078 [2.00]
.039
.012 [0.30] SQ.
[1.00]
C
.039
.012 [0.30] SQ.
[1.00]
C Per Row
A = .031 [.80] X No of Positions
B = .031 [.80] X No of Spaces Per Row
A
=
.031
[.80]
X
No
of
Positions
C = .031 [.80] X No of Spaces - 1Per Row
B = .031 [.80] X No of Spaces Per Row
C = .031 [.80] X No of Spaces - 1
.039 [1.00]
ø.025
[ø0.65]
ø.025
[ø0.65]
.181
[4.60]
.181
[4.60]
.051 [1.30]
0.8mm SMT Male Header
SPH2 SMT Series
.120
[3.05]
.120
[3.05]
.127 [3.25]
.110
.012 x .010
[2.79]
[0.3 x 0.2]
.110
.012 x .010
[2.79]
x 0.2] Per Row
A = .031 [.80] X No of[0.3
Positions
B = .031 [.80] X No of Spaces Per Row
A = .031 [.80] X No of Positions Per Row
B = .031 [.80] X No of Spaces
Per Row
A
B
A
B
.047
[1.20]
.047
[1.20]
.031 [0.80]
.031 [0.80]
.118
[3.00]
.118
[3.00]
.012 x .008
.039
[0.3 x 0.2]
[1.00]
ø.025
.012 x .008
.039
[ø0.65]
C x 0.2]
[0.3
[1.00]
ø.025
C
A = .031 [.80] X No of Positions
Per Row[ø0.65]
B = .031 [.80] X No of Spaces Per Row
A=
= .031
.031 [.80]
[.80] X
X No
No of
of Spaces
Positions- 1Per Row
C
B = .031 [.80] X No of Spaces Per Row
C = .031 [.80] X No of Spaces - 1
.127 [3.25]
0.8mm Female Header
SRS2 Series
.120
[3.05]
.120
[3.05]
SRS2-60-UA-SMT
.127 [3.25]
.127 [3.25]
.181
[4.60]
.181
[4.60]
0.8mm SMT Female Header
SRS2 SMT Series
1.0mm MICRO HEADERS
A
B
A
B
A
.125
[3.17]
.125
[3.17]
68[
.075 [1.90]
.68[
.075 [1.90]
A
MPH2-60-UA
B
.039 [1.00]
B
.039 [1.00]
.039
[1.00]
.039
[1.00]
.039
[1.00]
.039
[1.00]
.059 [1.49]
.012 [0.30] SQ.
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
1.0mm Male Header
MPH2 Series
.084
[2.12]
.084
[2.12]
.110
.014 [.36]
[2.79]
.110
.014 [.36]
[2.79]
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.039
[1.00]
.039
[1.00]
.071 [1.80]
.039 [1.00]
.039 [1.00]
.059 [1.49]
.012 [0.30] SQ.
.039
[1.00]
.039
[1.00] Female Header
1.0mm
MRS2 Series
A
B
A
B
MPH2-60-UA-SMT
.075 [1.90]
.100
[2.54]
.100
[2.54]
.039 [1.00]
A
B
A
B
.075 [1.90]
.039 [1.00]
.059 [1.49]
.012 [0.30] SQ.
.125
[3.17]
.125
[3.17]
MRS2-60-UA
.059 [1.49]
.012 [0.30] SQ.
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.205
[5.21]
.205
[5.21]
MRS2-60-UA-SMT
.039
[1.00]
.039
[1.00]
.039 [1.00]
.071 [1.80]
1.0mm SMT Male Header
MPH2-SMT Series
.100
[2.54]
.100
[2.54]
.087 [2.21]
.039 [1.00]
.014 [.36]
.084
[2.12]
.084
[2.12]
.014 [.36]
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
A = .039 [1.00] X No of Positions Per Row
B = .039 [1.00] X No of Spaces Per Row
.087 [2.21]
.150
[3.81]
.150
[3.81]
1.0mm SMT Female Header
MRS2-SMT Series
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
241
.050" PIN HEADERS
.050" [1.27] CENTERLINE
Adam Technologies, Inc.
HPH SERIES
INTRODUCTION:
Adam Tech .050" HPH Series Pin Headers are fine pitched, low
profile, PCB mounted pin headers intended for limited space
applications or where overall size is a factor. Our specially tooled
insulators and contacts offer consistent high quality through
automated production processes. This series offers an extensive
range of single, dual and stacked versions. Each is available in thruhole PCB or SMT mounting with choice of tin, gold or selective gold
plating.
FEATURES:
Single and Dual Row
Stacked, Thru-Hole and SMT mounting
Pin Header and Female Header sets
Lightweight and Compact
Hi Temp Insulator available
Choice of plating
ORDERING INFORMATION
MATING OPTIONS:
Mates with all industry standard .050" [1.27mm] pitch female headers
designed for use with 0.4mm Sq. pins and Low profile receptacle
SERIES
INDICATOR
HPH1 =
050" Single row
Pin Header
HPH2 =
.050" Dual Row
Pin Header
SPECIFICATIONS:
Material:
Standard Hi-Temp insulator: Nylon 6T or Nylon 46, rated UL94V-0
Insulator Color: Black
Contacts: Brass or Phosphor Bronze
Plating:
U = Gold flash over nickel underplate overall
SG = Gold flash over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. Initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 Cycles min.
Temperature Rating:
Operating temperature: -40°C to +105°C
Soldering process temperature: 260°C
Pb
RoHS
COMPLIANT
2002 / 95 / EC
®
DHPH
®
®
V
D E
AVA I L A B L E
OPTIONS:
Add designator(s) to end of part number
HT = Hi-Temp insulator for Hi-Temp soldering
processes up to 260°C
RoHS
(Add this option for thru-hole products only.COMPLIANT
All SMT products are manufactured
with Hi-Temp insulators)
SMT = Dual Row Surface Mount leads with Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
SMT-A = Single Row Surface Mount Leads Type A
SMT-B = Single Row Surface Mount Leads Type B
242
SG
A
MATING/
SOLDER-TAIL
LENGTH
A = Standard length
B = Special length,
customer specified,
defined as tail
length/total length
POSITIONS
01 thru 32
(single row)
04 thru 100
(dual row)
PLATING
SG = Selective gold
plating in
contact area
Tin plating
on solder tails
U = Gold Plated
T = Tin Plated
ORDERING INFORMATION
HI-TEMP
UL
INSULATOR
100
INSULATOR
SIZE
A = .039" mm insulator thickness
single or dual row
(dual row .050"x.050")
B = .100" insulator thickness
single or dual row
(dual row .050"x.100")
PACKAGING:
Anti-ESD plastic bags
APPROVALS AND CERTIFICATIONS:
UL Recognized File No. E224053
CSA Certified File No. LR1578596
B
HPH2
2
SERIES
INDICATOR
DHPH =
Dual insulator
.050" centerline
Pin Header
NO. OF ROWS
1 = Single row .050"
2 = Dual row .050"x.100"
50
SG
.XXX"/.XXX"/.XXX"
(C DIM) (D DIM) (E DIM)
SPECIFIED IN INCHES
AS: C Dim./D Dim./E Dim.
(replace D Dim. with SMT
for surface mount option)
PLATING
SG = Selective gold plating in
contact area and Tin
plating on solder tails
U = Gold Plated
T = Tin Plated
POSITIONS
01 thru 50 (single row)
04 thru 100 (dual row)
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
.050" PIN HEADERS
.050" [1.27] CENTERLINE
Adam Technologies, Inc.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
HPH SERIES
PIN 1
HPH1-A
.071 [1.80]
SINGLE ROW STRAIGHT
WITH 1.00mm INSULATOR
A
B
.050 [1.27]
Recommended
PCB LayoutPCB Layout
.039 [1.00]
B
.050 [1.27]
ø .026
[ 0.65]
.118 [3.00]
.090 [2.30]
HPH1-A-20-UA
.016 [0.40] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
PIN 1
HPH1-B
.100 [2.54]
SINGLE ROW STRAIGHT
WITH .100" INSULATOR
A
B
.050 [1.27]
Recommended PCB Layout
PCB Layout
.018 [0.46] SQ.
.118 [3.00]
B
.050 [1.27]
ø .030
[ 0.75]
.100 [2.54]
HPH1-B-20-UA
.105 [2.66]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
PIN 2
HPH2-A
.136 [3.45]
Recommended PCB Layout
PIN 1
A
B
.050 [1.27]
PCB Layout
B
.050 [1.27]
DUAL ROW STRAIGHT
WITH 1.00mm INSULATOR
.050 [1.27]
.016 [0.40] SQ.
ø .026
[0.65]
.039 [1.00]
.050
[1.27]
.118 [3.00]
HPH2-A-40-UA
.090 [2.30]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
HPH2-B
.100 [2.54]
DUAL ROW STRAIGHT
WITH .100" INSULATOR
PIN 1
A
B
.050 [1.27]
PCB Layout
B
.050 [1.27]
.197
[5.00]
ø .030
[ 0.75]
.118 [3.00]
.100 [2.54]
.105 [2.66]
.100
[2.54]
HPH2-B-40-UA
.018 [0.46] SQ.
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
HPH1-A (SMT)
.071 [1.80]
PIN 1
SINGLE ROW STRAIGHT SMT
WITH 1.00mm INSULATOR
Recommended PCB Layout
PCB Layout
B
.050 [1.27]
A
B
.050 [1.27]
.016 [0.40] SQ.
.118 [3.00]
.189 [4.80]
.094 [2.40]
.105 [2.68]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
HPH1-A-20-UA-SMT
.039 [1.00]
.030 [.76]
HPH1-B (SMT)
.100 [2.54]
PIN 1
SINGLE ROW STRAIGHT SMT
WITH .100" INSULATOR
A
B
.050 [1.27]
B
.050 [1.27]
.118 [3.00]
.242 [6.15]
.094 [2.40]
.030 [.76]
.100 [2.54]
.150 [3.81]
HPH1-B-20-UA-SMT
.018 [0.46] SQ.
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
243
.050" PIN HEADERS
.050" [1.27] CENTERLINE
Adam Technologies, Inc.
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
ø .035
[ 0.90]
HPH SERIES
HPH2-A (SMT)
PIN 2
.136 [3.45]
PIN 1
PCB Layout
B
A
B
.050 [1.27]
.016 [0.40]
SQ.
.050 [1.27]
.094 [2.40]
.248 [6.30]
.118 [3.00]
.039 [1.00]
.050 [1.27]
ø .031 [ 0.80]
.027 [0.70]
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
HPH2-A-40-UA-SMT
.066
[1.68]
.217 [5.50]
PIN 2
HPH2-B (SMT)
.100 [2.54]
PIN 1
B
A
B
.050 [1.27]
.094 [2.40]
.200
[5.08]
.287 [7.30]
.118 [3.00]
.100 [2.54]
.050 [1.27]
.027 [0.70]
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
HPH2-B-40-UA-SMT
.018 [0.46] SQ.
PIN 1
Recommended PCB Layout
DHPH-1
.100 [2.54]
A
B
PCB Layout
C
.100 [2.54]
B
.050 [1.27]
ø.030
[0.75]
E
D
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
.018 [0.46] SQ.
PIN 2
DHPH-1-20-U-.079/.079/.354
DHPH-2
.100 [2.54]
PIN 1
A
B
PCB Layout
.197 [5.00]
C
B
.050 [1.27]
ø.030
[0.75]
.100 [2.54]
E
.100
[2.54]
D
A = .050 [1.27] X No. of Positions
B = .050 [1.27] X No. of Spaces
.018 [0.46] SQ.
DHPH-1 (SMT)
.100 [2.54]
Recommended PCB Layout
DHPH-2-32-U-.079/.079/.354
PIN 1
A
B
B
.050 [1.27]
C
.100 [2.54]
.189 [4.80]
E
.121 [3.08]
.150 [3.81]
.030 [0.76]
DHPH-1-10-U-.079/SMT-A/.3.54
.018 [0.46] SQ.
A = .050 [1.27] X No. of Positions per row
B = .050 [1.27] X No. of Spaces
Recommended PCB Layout
PIN 2
DHPH-2 (SMT)
.100 [2.54]
PIN 1
A
B
B
.197 [5.00]
C
.121 [3.08]
.287 [7.30]
.018 [0.46] SQ.
.100 [2.54]
E
.050 [1.27]
244
.027 [0.70]
.150 [3.81]
DHPH-2-40-U-.079/SMT/.3.54
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
.050" HEADER SET
.050" X .050" [1.27 X 1.27] CENTERLINE
Adam Technologies, Inc.
HSH & HFH SERIES
MALE HEADER
PCB LAYOUT
Recommended
PCB Layout
B
C
C
.050 [1.27]
PIN 2
.130 [3.30]
ø .026 [ø 0.65]
.050 [1.27]
PIN 1
.050 [1.27]
Standard: With key & without peg
.211
[5.35]
A
ORDERING INFORMATION
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
.213
[5.40]
.094 [2.40]
50
HSH
G
PLATING
G = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS
solder tails
10 thru 100
SERIES
INDICATOR
HSH = .050"
Shrouded
header
OPTIONS:
SMT = Surface mount leads with
HSH SERIES
.050
[1.27]
.016 [0.40] SQ.
SHROUDED MALE HEADER
Recommended PCB Layout
PCB LAYOUT
C
B
C
ø .051
[ø 1.30]
PIN 2
.126 X .027
[3.20 X 0.70]
PIN 1
.050 [1.27]
.050 [1.27]
D
.211
[5.35]
A
.213
[5.40]
Hi-Temp insulator
FEMALE HEADER
A = .050 X No. of Spaces + .168 [4.27]
B = .050 X No. of Spaces + .074 [1.87]
C = .050 X No. of Spaces
D = .050 X No. of Spaces + .120 [3.05]
.039
[1.00]
.016 [0.40] SQ.
ø .039
[ø 1.00]
P = Peg option (thru hole only)
Standard: With key & with peg
.236
[6.00]
ø .027
[ø .70]
HSH-SMT SERIES
SHROUDED MALE HEADER
A
B
.050 [1.27]
Recommended PCB Layout
PCB LAYOUT
PIN 2
B
.050 [1.27]
.050 [1.27]
PIN 1
.050 [1.27]
.025 [0.65]
ORDERING INFORMATION
50
HFH
G
.144
[3.65]
Standard: With key & without peg
.118
[3.00]
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
.106
[2.70]
HFH SERIES
.016 X .005
[0.40 X 0.12]
PLATING
G = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin
TOTAL
plated
POSITIONS
solder tails
10 thru 100
SERIES
INDICATOR
HFH = .050"
Female
header
SHROUDED FEMALE HEADER
Recommended PCB Layout
.054
[1.38]
B
A
B
.050 [1.27]
ø .051
ø 1.30]
[
.126 X .027
[3.20 X 0.70]
.050
[1.27]
.016 X .005
[0.40 X 0.12]
.118
[3.00]
OPTIONS:
SMT = Surface mount leads
ø .033
[ ø 0.85]
ø .047 [ø 1.20]
C
Standard: With key & with peg
A = .050 X No. of Spaces + .068 [1.73]
B = .050 X No. of Spaces
C = .050 X No. of Spaces + .120 [3.05]
.173
[4.40]
with Hi-Temp insulator
NP = No peg
NK = No Key
P = Peg option (thru hole only)
.050 [1.27]
C
.144
[3.65]
.216
[5.50]
HFH-SMT SERIES
SHROUDED FEMALE HEADER
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
245
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
Adam Technologies, Inc.
2PH SERIES
INTRODUCTION
Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full
range of fine pitched headers in a variety of configurations including
Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or
SMT mounting. Their close tolerance .020" sq. posts are smoothly
finished and taper tipped to eliminate insertion damage to the PCB or
mating connector. Adam Tech 2.0mm Pin Headers can be easily cut
into exact sizes as required. Options include stacked insulator
versions and choice of tin, gold or selective gold plating. This series
is compatible with all industry standard 2.0mm pitch mating
connectors.
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
MATING RECEPTACLES:
Mates with all industry standard .050" pitch female headers
SPECIFICATIONS:
Material:
Standard insulator: PBT, glass reinforced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate overall
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max.
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 1,000 cycles
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature: 260°C
PACKAGING:
Anti-ESD plastic bags
(Tape and Reel available for SMT option)
ORDERING INFORMATION
SERIES INDICATOR
2PH1 = 2.00mm Single
Row Straight
Pin Header
2PH2 = 2.00mm Dual
Row Straight
Pin Header
2PH1R = 2.00mm Single
Row Right
Angle Pin
Header
2PH2R = 2.00mm Dual
Row Right
Angle
Pin Header
D2PH
1
40
NO. OF ROWS
1 = Single row
2 = Dual row
SERIES
INDICATOR
D2PH = 2mm Dual
Insulator
Pin Header
AVA I L A B L E
®
Pb
®
A
PIN LENGTH
A = Standard
length
B = Special
length,
customer
specified
defined as:
tail dim/total
length
PLATING
U = Gold plated
T = Tin plated
SG = Selective gold
plating in contact
area, tin plating
on solder tails
ORDERING INFORMATION
DUAL INSULATOR HEADERS
INSULATOR
®
U
POSITIONS
Single row: 1 thru 40
Dual row: 2 thru 80
HI-TEMP
APPROVALS AND CERTIFICATIONS:
UL Recognized File No. E224053
UL
CSA Certified File No. LR1578596
40
2PH1
RoHS
V
E
DCOMPLIANT
2002 / 95 / EC
SG
.xxx"/.xxx"/.xxx
“C” DIM.
“D” DIM.
PLATING
U = Gold plated
T = Tin plated
SG = Selective
gold plating
in contact
area tin
plating on
solder tails
STACKING DIMENSIONS
Specified In Inches As:
“C” Dim. / “D” Dim. / “E” Dim.
Replace “D” Dim. with “SMT”
for Surface Mount Option
POSITIONS
Single row: 2 thru 40
Dual row: 4 thru 80
OPTIONS: Add designator(s) to end of part number
SMT = Surface Mount leads Dual Row
SMT-A = Surface Mount leads Type A
SMT-B = Surface Mount Leads Type B
RoHS
COMPLIANT
HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260°C
(Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators)
L = Low profile 1.5mm insulator thickness
P = Locating pegs
BR = Board retention sold
246
“E” DIM.
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
Adam Technologies, Inc.
2PH SERIES
2PH1
.079 [2.00]
A
PIN 1
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
B
.079
[2.00]
.154 [3.90]
Ø.031 [0.80]
B
.110 [2.80]
.079
[2.00]
.079 [2.00]
.020 [0.51]
Recommended PCB Layout
2PH1R
A
.079 [2.00]
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 1
B
ø.031 [0.80]
.154 [3.90]
.118
[3.00]
.079 [2.00]
.110 [2.80]
.079
[2.00]
B
.079 [2.00]
Recommended PCB Layout
.020 [0.51]
2PH2
.157 [4.00]
PIN 2
A
PIN 1
.079
[2.00]
B
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
ø.031 [0.80]
.154
[3.90]
B
.079 [2.00]
.079 [2.00]
.110 [2.80]
.079 [2.00]
.079
[2.00]
.020 [0.51] .sq
Recommended PCB Layout
2PH2R
A
PIN 2
.157 [4.00]
PIN 1
.079
[2.00]
B
ø.031 [0.80]
B
.154 [3.90]
.079 [2.00]
.079 [2.00]
.118 [3.00]
.079 [2.00]
.079
[2.00]
.020 [0.51] .sq
.110 [2.80]
Recommended PCB Layout
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
247
2.00mm PIN HEADERS
.079" [2.00] CENTERLINE
Adam Technologies, Inc.
2PH SERIES
2PH1-SMT PIN 1
2PH1 (SMT)
A = .079" [2.00] x No. of positions
.079 [2.00]
TYPE B
B = .079" [2.00] x No. of spaces
PIN 1
.079 [2.00]
TYPE A
Recommended PCB Layout
A
B
.079
[2.00]
.059
[1.50]
.157
[4.00]
.086 [2.20]
.165
[4.20]
.020
[0.50] Sq.
.079 [2.00]
2PH2-SMT
B
.079 [2.00]
.033
[0.85]
B
.033
[0.85]
.185
[4.70]
.185
[4.70]
.092 [2.35]
SMT-A
SMT-B
2PH2 (SMT)
A = .079" [2.00] x No. of positions
PIN 2
B = .079" [2.00] x No. of spaces
.157 [4.00]
PIN 1
.079
[2.00]
A
B
Recommended PCB Layout
.059
[1.50]
B
.079 [2.00]
.157
[4.00]
.033 [0.85]
.086 [2.20]
.079 [2.00]
.244
[6.20]
.020
[0.50] Sq.
.264
[6.70]
.102 [2.60]
D2PH-1
D2PH-1
A
A = .079" [2.00] x No. of positions
.079 [2.00]
B = .079" [2.00] x No. of spaces
PIN 1
B
C
Recommended PCB Layout
.079 [2.00]
ø .031 [0.80]
E
B
.079 [2.00]
D
.079 [2.00]
.020 [0.50] Sq.
.079 [2.00]
A
D2PH-2
A = .079" [ 2.00] x No. of positions
B= ..079" [ 2.00] x No. of spaces
PIN 2
.157 [4.00]
PIN 1
.079 [2.00]
B
C
Recommended PCB Layout
.079 [2.00]
ø.031 [0.80]
E
B
.079 [2.00]
.079 [2.00]
D
.079 [2.00]
248
.020 [0.50] Sq.
.079 [2.00]
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
2.00mm HEADERS & SHUNTS
.079" [2.00] CENTERLINE
Adam Technologies, Inc.
2PH SERIES
D2PH-1 (SMT)
PIN 1
D2PH-1-SMT
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
.079 [2.00]
TYPE B
PIN 1
.079 [2.00]
TYPE A
D2PH-1-12-U-.100/SMT/.240
A
B
Recommended PCB Layout
C
B
.079 [2.00]
.033
[0.85]
.079 [2.00]
E
.079 [2.00]
.079 [2.00]
.092
[2.35]
.185
[4.70]
.129 [3.27]
.165
[4.20]
.020
[0.50] Sq.
B
.079 [2.00]
.033
[0.85]
.092
TYPE B [2.35]
TYPE A
SMT-A
SMT-B
D2PH-2-SMT
A = .079" [2.00] x No. of positions
B = .079" [2.00] x No. of spaces
PIN 2
RECOMENDED PCB LAYOUT
D2PH-2 (SMT)
.157 [4.00]
PIN 1
A
B
.079
[2.00]
D2PH-2-16-U-.145/SMT/.360
Recommended PCB Layout
C
B
.079 [2.00]
.079 [2.00]
.033 [0.85]
E
.079 [2.00]
.129 [3.27]
.079 [2.00]
MS2B
MS2B
MS2A
MS2A
WITH
RIGID
SHORT
HANDLE
WITH
FLEXIBLE
LONG
HANDLE
.374
[9.50]
.078 [2.00]
.157
[4.00]
MS2H-2
MS2H-2
.157
[4.00]
.197
[5.00]
.157
[4.00]
.441
[11.20]
.177
[4.50]
.078
[2.00]
RECOMENDED PCB LAYOUT
.138
[3.50]
.177
[4.50]
MS2H-1
MS2H-1
.102 [2.60]
.078 [2.00]
.157
[4.00]
.078 [2.00]
MS2C
MS2C
.079
[2.00]
.079
[2.00]
.157
[4.00]
.264
[6.70]
.244
[6.20]
.020
[0.50] Sq.
.177
[4.50]
.079 [2.00]
.078
[2.00]
.079 [2.00]
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
249
.100" PIN HEADERS
.100" [2.54] CENTERLINE
Adam Technologies, Inc.
PH SERIES
INTRODUCTION:
Adam Tech PH Series .100" Pin Headers offer a full range headers
in a variety of configurations including Single, Dual and Three rows,
Straight or Right Angle in Thru-Hole or SMT mounting. Their close
tolerance .025" sq. posts are smoothly finished and taper tipped to
eliminate insertion damage to the PCB or mating connector. Adam
Tech Pin Headers can be easily cut into exact sizes as required.
Options include stacked insulator versions and choice of tin, gold
or selective gold plating. This series is compatible with all industry
standard .100" pitch pin headers.
FEATURES:
Single, Dual or Three Row
Tin, gold or selective gold plating options
Thru-hole or SMT mounting
Stacked and Custom length versions available
Versatile Breakaway design
Hi Temp Insulator available
MATING RECEPTACLES:
Mates with all industry standard receptacles accepting a .025"
square post on .100" [2.54mm] centerlines
SPECIFICATIONS:
Material:
Insulator: PBT, glass reinforeced, rated UL94V-0
Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Brass
Plating:
U = Gold flash (30u” optional) over nickel underplate
SG = Gold flash (30u” optional) over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall
Electrical:
Operating voltage: 250V AC max.
Current rating: 3 Amps max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Insertion force: 2 oz lbs max.
Withdrawal force: .75 oz lbs min
Mating durability: 1000 cycles min.
Temperature Rating:
Operating temperature: -55°C to +105°C
Soldering process temperature:
Standard insulator: 235°C
Hi-Temp insulator: 260°C
PACKAGING:
Anti-ESD plastic bags
SAFETY AGENCY APPROVALS:
UL Recognized File No. E224053
CSA Certified File No. LR1578596
Pb
UL
®
250
®
®
RoHS
V
E
DCOMPLIANT
2002 / 95 / EC
HI-TEMP
INSULATOR
AVA I L A B L E
ORDERING INFORMATION
PH1
40
SERIES INDICATOR
PH1 = Single Row,
Straight
PH1RA = Single Row,
Right Angle,
High Profile
PH1RB = Single Row,
Right Angle,
Low Profile
PH2 = Dual Row,
Straight
PH2RA = Dual Row,
Right Angle
PH3 = Three Row,
Straight
PH3RA = Three Row,
Right Angle
POSITIONS
PH1: 1 thru 40
PH2: 2 thru 80
PH3: 3 thru 120
U
A
MATING/TAIL
LENGTH
A = Mating Length
("C" dim.) = .235"
Solder Tail
("D" dim.) = .120"
B = Mating Length
("C" dim.) = .318"
Solder Tail Length
("D" dim.) = .120"
Special lengths
available contact
factory
PLATING
U = Gold flash overall
V = 15 µin gold on mating
area 100 µin tin on
solder tail
W = 30 µin gold on mating
area 100 µin tin on
solder tail
T = 100 µin tin overall
SG = Gold flash on
mating area 100 µin
tin lead on solder tail
OPTIONS:
Add designator(s) to end of part number
SMT = Surface mount leads Dual row with Hi-Temp insulator
SMT-A = Surface mount leads Type A with Hi-Temp insulator
SMT-B = Surface mount leads Type B with Hi-Temp insulator
HT= Hi-Temp insulator for Hi-Temp soldering processes
up to 260°C (Add this option for thru-hole products only.
All SMT products are manufactured with Hi-Temp insulators)
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
RoHS
COMPLIANT
.100" PIN HEADERS
.100" [2.54] CENTERLINE
Adam Technologies, Inc.
PH SERIES
PH1
SINGLE ROW
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.098 [2.50]
PIN 1
PH1-16-UA
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
ø .040 [1.02]
PH2
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
DUAL ROW
PIN 2
.197 [5.00]
PIN 1
PH2-32-UA
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
ø.040 [1.02]
.100 [2.54]
PH3
A = .100 [2.54] X No. of Positions per row.
TRIPLE ROW
B = .100 [2.54] X No. of Spaces.
PIN 3
.295
[7.50]
PIN 2
PIN 1
PH3-48-UA
.200
[5.08]
A
B
Recommended PCB Layout
C
B
.098 [2.50]
D
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
.100 [2.54]
.200
[5.08]
.100 [2.54]
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
ø.040 [1.02]
251
.100" PIN HEADERS
.100" [2.54] CENTERLINE
Adam Technologies, Inc.
PH SERIES
PH1RB
PH1RA & PH1RB - SINGLE ROW
.098 [2.50]
SINGLE ROW
PIN 1
A
B
PH1RB-16-UA
.153
[3.90]
C
C
Recommended PCB Layout
.098 [2.50]
.100 [2.54]
B
D
.025 [0.64] SQ.
D
PH1RA
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
.100 [2.54]
ø.040
[1.02]
PH2RA
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
DUAL ROW
PIN 2
PH2RA - DUAL ROW
.197 [5.00]
PIN 1
A
B
PH2RA-32-UA
.100 [2.54]
PCB LAYOUT
C
Recommended PCB Layout
.098 [2.50]
B
.153 [3.90]
.100 [2.54]
.100 [2.54]
D
.025 [0.64] SQ.
.100 [2.54]
A = .100 [2.54] X No. of Positions per row.
B = .100 [2.54] X No. of Spaces.
ø.040 [1.02]
PH3RA
TRIPLE ROW
PIN 3
PIN 2
PH3RA - TRIPLE ROW
.295 [7.50]
PIN 1
PH3RA-48-UA
A
B
.100 [2.54]
C
PCB LAYOUT
Recommended PCB Layout
.098 [2.50]
B
.153 [3.90]
.100 [2.54]
.100 [2.54]
252
.025 [0.64] SQ.
D
.200
[5.08]
.100 [2.54]
ø.040 [1.02]
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
.100" PIN HEADERS
.100" [2.54] SURFACE MOUNT
Adam Technologies, Inc.
PH SERIES
PH1
PIN 1
PH1-SMT - SINGLE ROW
.098 [2.50]
TYPE B
SMT-SINGLE ROW
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
PIN 1
PH1-15-UA-SMT-B
.098 [2.50]
TYPE A
Recommended PCB Layout
A
B
.098 [2.50]
.100 [2.54
.130 [3.30]
.216
[5.50]
.197
[5.00]
.025
[0.64] SQ
B
.100 [2.54]
.039 [1.00]
B
.100 [2.54]
.039 [1.00]
C
.079 [2.00]
RECOMENDED PCB LAYOUT
SMT-A
TYPE A
TYPE
B
SMT-B
PH2
SMT-DUAL ROW
A = .100 [2.54] X No. of Positions per row. PH2-SMT - DUAL ROW
B = .100 [2.54] X No. of Spaces.
PIN 2
.197 [5.00]
PIN 1
PH2-26-UA-SMT
A
B
.100 [2.54]
B
.100 [2.54]
.039 [1.00]
C
.098 [2.50]
.100 [2.54]
.130 [3.30]
.295
[7.50]
.025 [0.64] SQ.
.315
[8.00]
.079 [2.00]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
A = .100 [2.54] X No. of Positions.
B = .100 [2.54] X No. of Spaces.
PH1RB
PH1R-SMT - SINGLE ROW
SMT-SINGLE ROW
PIN 1
.098 [2.50]
A
B
PH1RB-10-UA-SMT
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.079 [2.00]
0.154
[3.90]
.100 [2.54]
Recommended
PCB
Layout
RECOMENDED PCB
LAYOUT
PIN 2
.197 [5.00]
A = .100 [2.54] X No. of Positions per row. PH2R-SMT - DUAL ROW
B = .100 [2.54] X No. of Spaces.
PH2RA
SMT-DUAL ROW
PIN 1
A
B
.100 [2.54]
PH2RA-20-UA-SMT
C
B
.100 [2.54]
.039 [1.00]
.098 [2.50]
.180 [4.57]
.216
[5.50]
.079 [2.00]
.100 [2.54]
Recommended
PCB Layout
RECOMENDED PCB LAYOUT
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM
253
.100" PIN HEADERS
DUAL INSULATOR .100" [2.54] CENTERLINE
Adam Technologies, Inc.
DPH SERIES
DPH-1
DPH-1-SMT
.098 [2.50]
A
.098 [2.50]
A
.098
[2.50]
.098
[2.50]
B
B
.098
[2.50]
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.025 [0.64] SQ.
.197
[5.00]
.025 [0.64] SQ.
.100
[2.54]
.100 [2.54]
.040
[1.00]
B
.217
[5.50]
.100
[2.54]
ø.040
[1.02]
B
DPH-1-10-U-.220/.100/.350
Recommended PCB Layout
RECOMENDED PCB LAYOUT
DPH-2
DPH-1-12-U-.200/SMT/.220-A
Recommended PCB Layout
RECOMMENDED PAD LAYOUT
DPH-2-SMT
A
A
.197 [5.00]
.197 [5.00]
.100
[2.54]
B
.098
[2.50]
.100
[2.54]
B
.098
[2.50]
C
C
E
E
D
.100
[2.54]
.100
[2.54]
.025
[0.64] SQ.
.295
[7.50]
B
.100
[2.54]
B
.100 [2.54]
.025 [0.64] SQ.
.100 [2.54]
.040 [1.00]
.059
[1.50]
.315
[8.00]
.100
[2.54]
ø.040 [1.02]
DPH-2-22-U-.220/.100/.350
Recommended
PCB
Layout
RECOMENDED
PCB
LAYOUT
Recommended PCB Layout
RECOMENDED PAD LAYOUT
DPH-2-16-U-.250/SMT/.300
ORDERING INFORMATION
DPH
2
20
SERIES INDICATOR
DPH = Dual insulator
.100" centerline
NO. OF ROWS
1 = Single row
2 = Dual row
3 = Triple row
POSITIONS
1 thru 40 (single row)
4 thru 80 (dual row)
3 thru 120 (triple row)
.XXX"/.XXX"/.XXX"
SG
(C DIM) (D DIM) (E DIM)
PLATING
U = Gold plated
T = Tin plated
SG = Gold plating
in contact
area, tin plating
on solder tails
SPECIFIED IN INCHES AS:
C Dim. / D Dim. / E Dim.
(replace D Dim. with SMT
for surface mount option)
RECOMMENDED PCB LAYOUT
254
909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM