NPN Power Silicon Transistor 2N3055 Features • Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/407 • TO-3 (TO-204AA) Package Maximum Ratings Ratings Symbol Value Units 70 Vdc Collector - Base Voltage VCEO VCBO 100 Vdc Emitter - Base Voltage VEBO 7.0 Vdc IB IC 7.0 Adc 15 Adc PT 6.0 W Top, Tstg -65 to +200 °C Symbol Maximum Units RθJC 1.5 °C/W Collector - Emitter Voltage Base Current Collector Current Total Power Dissipation @ TA = 25 °C (1) Operating & Storage Temperature Range 1) Derate linearly @ 34.2 mW / °C for TA = 25 °C Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Electrical Characteristics OFF Characteristics Symbol Mimimum Maximum Units Collector - Emitter Breakdown Voltage IC = 200 mAdc V(BR)CEO 70 --- Vdc Collector - Emitter Breakdown Voltage IC = 200 mAdc, RBE = 100 Ω V(BR)CER 80 --- Vdc Collector - Emitter Breakdown Voltage VBE = -1.5 Vdc, IC = 200 mAdc V(BR)CEX 90 --- Vdc Collector - Emitter Cutoff Current VCE = 60 Vdc ICEO --- 1.0 mAdc Collector - Emitter Cutoff Current VBE = -1.5 Vdc, VCE = 100 Vdc ICEX --- 1.0 mAdc Emitter - Base Cutoff Current VEB = 7.0 Vdc IEBO --- 1.0 mAdc IC = 0.5 Adc, VCE = 4.0 Vdc IC = 4.0 Adc, VCE = 4.0 Vdc 40 --- --- 20 60 IC = 10.0 Adc, VCE = 4.0 Vdc 5 --- ----- 0.75 2.0 Vdc --- 1.4 Vdc ON Characteristics Forward Current Transfer Ratio HFE Collector - Emitter Saturation Voltage IC = 4.0 Adc, IB = 0.4 Adc IC = 10.0 Adc, IB = 3.3 Adc VCE(sat) Emitter - Base Saturation Voltage IC = 4.0 Adc, VCE = 4.0 Vdc VBE(sat) Revision Date: 8/26/2011 New Product 1 2N3055 Electrical Characteristics -con’t DYNAMIC Characteristics Symbol Mimimum Maximum Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 1.0 Adc, VCE= 4.0 Vdc, f = 100 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz | hfe | 8.0 40.0 Cobo --- 700 pF ton --- 6 μs toff --- 12 μs Units SWITCHING Characteristics Tum-On Time VCC = 30 Vdc; Tum-offTime VCC = 30 Vdc; IC = 4.0 Adc; IB1 = 0.4 Adc IC = 4.0 Adc; IB1= -IB2= 0.4 Adc SAFE OPERATING AREA DC Tests: TC = +25 °C, I Cycle, t = 1.0 s Test 1: VCE = 7.8 Vdc, IC = 15 Adc VCE = 70.0 Vdc, IC = 1.67 Adc Test 2: Outline Drawing Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics [email protected] Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Revision Date: 8/26/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.