PNP Power Silicon Transistor 2N6193 Features • Available in JAN, JANTX, JANTXV and JANS per MIL-PRF-19500/561 • TO-39 (TO-205AD) Package Maximum Ratings Ratings Collector - Emitter Voltage Collector - Base Voltage Emitter - Base Voltage Collector Current Base Current Total Power Dissipation @ TA = 25 °C @ TC = 25 °C Operating & Storage Temperature Range Symbol Value Units VCEO VCBO VEBO 100 Vdc 100 Vdc 6.0 Vdc IC IB 5.0 Adc 1.0 Adc PT 1.0 17.5 W W Top, Tstg -65 to +200 °C Symbol Maximum Units RθJC 10 °C/W Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Electrical Characteristics (TA = 250C unless otherwise noted) OFF Characteristics Symbol Mimimum Maximum Units V(BR)CEO 100 --- Vdc Collector - Emitter Cutoff Current VCE = 100 Vdc ICEO --- 100 μAdc Emitter - Base Cutoff Current VEB = 6.0 Vdc IEBO --- 100 μAdc Collector - Emitter Cutoff Current VCE = 90 Vdc, VBE = -1.5 Vdc ICEX --- 10 μAdc Collector - Base Cutoff Current VCE = 100 Vdc ICBO --- 10 μAdc Collector - Emitter Breakdown Voltage IC = 50 mAdc Revision Date: 10/12/2011 New Product 1 2N6193 Electrical Characteristics -con’t ON Characteristics Symbol Mimimum HFE 60 DC Current Drain IC = 0.5 Adc, VCE = 2.0 Vdc IC = 2.0 Adc, VCE = 2.0 Vdc IC = 5.0 Adc, VCE = 2.0 Vdc Collector-Emitter Saturation Voltage IC = 2.0 Adc, IB = 0.2 Adc IC = 5.0 Adc, IB = 0.5 Adc Base-Emitter Saturation Voltage IC = 2.0 Adc, IB = 0.2 Adc Maximum Units 240 μAdc 0.7 Vdc 60 40 VCE(sat) --- 1.2 VBE(sat) --- IC = 5.0 Adc, IB = 0.5 Adc 1.2 Vdc 1.8 DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.5 Adc, VCE= 10.0 Vdc, f = 10 MHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz Output Capacitance VBE = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz | hfe | 3 15 Cobo --- 300 pF Cibo --- 1250 pF SWITCHING Characteristics Delay Time VCC = -40 Vdc, VBE(off) = 2.3 Vdc, td --- 100 ns Rise Time IC = 2.0 Adc, IB1= 0.2 Adc tr --- 100 ns Storage Time VCC = -40 Vdc, IC = 2.0 Adc, ts --- 2.0 ns Fall Time IB1 = -IB2 = 0.2 Adc tf --- 200 ns SAFE OPERATING AREA DC Tests: TC = +25 °C, 1 Cycle, t = 0.55 s Test 1: VCE = 2.0 Vdc, IC = 5.0 Adc VCE = 90 Vdc, IC = 55 mAdc Test 2: 2 603-641-3800 • 888-641--SEMI (7364) • [email protected] • www.aeroflex.com/metelics Revision Date: 10/12/2011 2N6193 Outline Drawing Note: All dimensions are inches [mm]. Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents www.aeroflex.com/metelics [email protected] Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Revision Date: 10/12/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.