BIAS TEES, TYPE N (75 W) up to 3 GHz, 100 Volts / 2.5 Amps SPECIFICATIONS: Models: 8875NMFX-YY, 8875NFFX-YY, 8875NMMX-YY, 8875NFMX-YY Electrical: Frequency Range Insertion Loss 10 MHz - 30 MHz 30 MHz - 3 GHz VSWR 30 MHz - 3 GHz Isolation (RF to Bias Port) 3dB Bandwidth Impedance Bias-Path Resistance DC Voltage DC Current 10 MHz - 3 GHz Maximum 3.00 dB 1.50 dB Maximum 1.80:1 > 30dB Typ. 5 MHz - 6 GHz 75 Ohms 0.04 Ohms Typ., 0.05 Ohms Max. 100 VDC Max. 2.5 Amps Max. Typical 2.00 dB 0.75 dB Typical 1.50:1 Environmental Operating Temperature Range Storage Temperature Range -55°C to +105°C -60°C to +90°C Mechanical: SMA Connectors Passivated Stainless Steel **Type N Connectors BNC Connectors Passivated Stainless Steel Nickel Plated Brass Gold Plated Beryllium Copper Aluminum with Chemical Conversion Coating Conductors Body **75 Ohm Type N Connectors Mate only with other 75 Ohm Type N Connectors Mating with a 50 Ohm Connector May DAMAGE Center Conductors. DC Input Connector Options Solder Post, X=1 BNC Female, X=3 .50 [12.70] 1.00 [25.40] .110 [2.79] .625 [15.87] DC Input (SMA Female Conn.) Option X = 2 2X Ø.106±.006 [Ø2.69±0.15] THRU AC + DC Port 1.29 [32.77] AC Port Connector Overall Model Configuration Port Length Numbers AC + DC AC Max. 8875NMFX-YY Male Female 2.35 [59.69] .110 [2.79] 1.070 [27.18] 8875NFFX-YY Female Female 2.40 [60.96] 8875NMMX-YY Male Male 2.30 [58.42] 8875NFMX-YY Female Male 2.35 [59.69] .45 [11.43] HOW TO ORDER: Model Number: 8875NZZX-YY Base Number DC Connector Type 1 = Solder Post 2 = SMA Female Conn. 3 = BNC Female Conn. Freq. Range 03 = 10 MHz - 3.0 GHz .85 [21.59] Overall Length Ordering Examples: Model Number: 8875NFF2-03 10 MHz - 3.0 GHz, Type 75-Ohm N Fem/Fem SMA Female DC Connector Type Model Number: 8875NMF1-03 10 MHz - 3 GHz, Type 75-Ohm N Male/Fem Solder Post DC Connector Type Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design specifications are subject to change without notice. Contact factory for technical specifications before purchasing or use. 8875N: REV B Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]