eBOX748 Series Quick Installation Guide(v.A1) Checklist Power Cord x 1 (For AC power supply only) Wall-Mount Kit x 1 (Option) eBOX748 series Quick Installation Guide Screw kit x 1 Do not attempt to apply power to the system if there is damage to any of its components. eBOX748-FL system unit x 1 SBC84810 Driver & Utilities CD x 1 K/B Mouse PS2 Y cablet x 1 II. Working Precautions 1. Always disconnect the unit from the power outlet whenever you are working inside the chassis. 2. If possible, wear a grounded wrist strap when you are working inside the computer chassis. Alternatively, discharge any static electricity by touching the bare metal chassis of the unit , or the bare metal body of any other grounded appliance. 3. Hold electronic circuit boards (such as the SBC83810 board) by the edges only. Do not touch the components on the board unless it is necessary to do so. Do not flex or stress the circuit board. 4. Use correct screws and do not over tighten screws. 5. Keep the original packaging and static-protective bag in case the unit has to be returned. ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L 1 Another CD-ROM contains the User’s Manual of the CPU card installed in your eBOX748 system. If you encounter any difficulties, please consult your dealer for assistance. I. eBOX748 Series Quick Installation Guide(v.A1) Step 1 Open/close the chassis cover by fasten/loose 10 screws on the top of the chassis. Step 2 Fasten/Loosen the indicated four screws on the HDD bracket. 2 ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L Another CD-ROM contains the User’s Manual of the CPU card installed in your eBOX748 system. If you encounter any difficulties, please consult your dealer for assistance. III Installing/Unstalling HDD eBOX748 Series Quick Installation Guide(v.A1) Step 3 Fasten/Loosen the HDD on the HDD bracket by the indicated four screws. ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L 3 eBOX748 Series Quick Installation Guide(v.A1) ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L 4 Installing/Unstalling Compact Flash Card & Memory IV Components in the eBOX748 Series are very fragile and sensitive. Should you replace or Components the eBOX748 very an fragile and sensitive. Should you replace return anyincomponent for Series repair,are consult authorized technician to dismantle it. or return any component for repair, consult an authorized technician to dismantle it. Step 4 Plug/unplug the IDE cable as the the indicated to the hard disk. eBOX748 Series Quick Installation Guide(v.A1) Step 1 Fasten/Loosen the indicated three screws. Step 2 Insert/remove a compact flash card into the socket. ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L 5 eBOX748 Series Quick Installation Guide(v.A1) Step 3 Firmly insert a DDR DIMM module into the socket. V Installing/Unstalling Wall Mount Kit Step 1 Fasten/Loosen the indicated four screws. 6 ©Copyright 2006 AXIOMTEK Co., Ltd. Version A1 June 2006 Printed in Taiwan 94160748000L