Master Catalog EX47000 Series IEC61850-3/IEEE1613 Unmanaged Hardened 8-port 10/100BASE Ethernet Switch Wide Temp Value IEC61850 IEEE1613 ITS IEC61850-3 & IEEE1613 compliant EN50121-4 compliant for railway management Redundant power inputs Versatile mounting options Features Provides flexibility of 4 to 8 10/100BASE-TX ports and 2 100BASE-FX ports Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Redundant power inputs(12-48VDC) with Terminal Block and DC Jack(12VDC) Alarms for power and Link Down failure by relay output Supports DIP switch configuration for link down alarm -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for functional operation @ -40°C to 85°C (-40°F to 185°F) Provides DIN-rail or panel mounting Complies with NEMA TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment Complies with IEC61850-3 and IEEE1613 Environmental requirements for power substation automation systems Complies with EN50121-4 environmental requirement for Railway application Ordering Information EX47080-00Z 8-port 10/100BASE-TX Hardened Unmanaged Ethernet Switch EX47062-X0Z 6-port 10/100BASE-TX + 2-port 100BASE-FX Hardened Unmanaged Ethernet Switch EX47061-X0Z 6-port 10/100BASE-TX + 1-port 100BASE-FX Hardened Unmanaged Ethernet Switch EX47042-X0Z 4-port 10/100BASE-TX + 2-port 100BASE-FX Hardened Unmanaged Ethernet Switch EX47041-X0Z 4-port 10/100BASE-TX + 1-port 100BASE-FX Hardened Unmanaged Ethernet Switch 100FX Fiber Options : (XY) = 1 : Multi Mode (SC) - 2Km 2:Multi Mode (ST) - 2Km 6:Multi Mode (SC) WDM-TX:1310nm/RX:1550nm - 2Km 7:Multi Mode (SC) WDM-TX:1550nm/RX:1310nm - 2Km 8:Multi Mode (SC) WDM-TX:1310nm/RX:1550nm - 5Km 9:Multi Mode (SC) WDM-TX:1550nm/RX:1310nm - 5Km A:Single Mode (SC) - 20Km B:Single Mode (SC) - 40Km H:Single Mode (ST) - 20Km P:Single Mode (SC) WDM-TX:1310nm/RX:1550nm - 20Km Q:Single Mode (SC) WDM-TX:1550nm/RX:1310nm - 20Km R:Single Mode (SC) WDM-TX:1310nm/RX:1550nm - 40Km S:Single Mode (SC) WDM-TX:1550nm/RX:1310nm - 40Km *More 100FX Fiber Options also available upon Power Input Interface : (Z) = B : Terminal Block & DC Jack Power Supply : (Optional) *Option A - The Terminal Block type external power supply are not included. Please order the following part numbers as requested: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP **Option B - The external power adapter and power cord are not included, Please order the following part numbers as requested: 41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP Installation Type : DIN Rail (mounting kit is included) Optional Panel mounting kit, Part number: KP-AA96-480 61 Ethernet Switches 01 Specifications Packet Buffer Memory 448K bits Processing Type Store-and-Forward 148,810pps for 100Mbps Half-duplex back-pressure and IEEE802.3x full-duplex Ambient Relative Humidity 5% to 95% (non-condensing) ISO Manufactured in an ISO9001 facility EMI FCC Part 15, Class A EN61000-6-4 -EN55022 -EN61000-3-2 -EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 8KV Air: + / - 15KV - EN61000-4-3 (Radiated FRI Standards) 35V/m, 80 to 3G; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV A.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Line D.C. Power Ports: + / - 4KV; Line-to-Earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10V @ 0.15 - 80MHz D.C. Power Ports: 10V @ 0.15 - 80MHz A.C. Power Ports: 10V @ 0.15 - 80MHz Earth Ground Ports: 10V @ 0.15 - 80MHz - EN61000-4-8 (Magnetic Field Standards) 1000A/m @ 50, 60Hz - IEC 61000-4-10(Oscillatory wave magnetic field test) 100kHz and 1MHz: 30A/m - IEC 61000-4-16 (Power frequency immunity test) 50Hz: 300V - IEC 61000-4-18 (oscillatory wave immunity test): 100 kHz, 2.5kV CM and 2.5kV DM 1MHz , 2.5kV CM and 2.5kV DM - IEEE1613: power frequency withstand voltage: 2KV, Insulation resistance >550 MOhm RJ45 Port 500V, Insulation resistance >550 MOhm Impulse voltage: 5Kv, Insulation resistance >550 MOhm IEC 60870-2-1: AC/DC power supply voltage variations 2048 MAC addresses Power Input -40°C to 85°C (-40°F to 185°F) Regulatory Approvals flow control Address Table Size Storage Temperature Input Voltage: 12VDC (DC Jack); 12 to 48VDC (Terminal Block) Power Consumption 6W Max. 12VDC @ 0.5A, 24VDC @ 0.25A, 48VDC @ Reverse Polarity Protection Present 0.125A Mechanical Casing Aluminum case Dimensions 60mm (W) x 125mm (D) x 145mm (H) (2.36" (W) x 4.92" (D) x 5.7" (H)) Weight 1Kg (2.2lbs.) Installation DIN-Rail, Panel Mounting Interface LED Indicators Per Unit: Power Status: Power 1, 2, 3 (Green), Fault (Red) Per Port: 10/100TX, 100FX: Link/Activity (Green) 10/100TX: 100 (Green) Alarm Contact Media Converters 14,880pps for 10Mbps -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Environmental Test Compliance One relay output with current 1A @ 24VDC IEC60068-2-6 (Vibration Resistance) 5G @ 150Hz; Criterion 3 (Operation/Storage/Transport) IEC60068-2-27 (Shock) 25G @ 11ms (Half-Sine Shock Pulse; Operation) 50G @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table Diagrams Ethernet Extenders Forward and Filtering Rate Operating Temperature Wireless Devices IEEE802.3x Ethernet Switches Environment IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX, Serial Device Servers Standards Accessories Technology Unit: mm 60 145 125 Front Side Back Top Bottom www.etherwan.com 62