FSA Series Flash SATA Disk /SATAIII SLC, MLC 2.5” SATA Flash Disk /SLC (MLC) Introduction Features ● SATA III standard interface, Excellent data transfer speed Capacity: SLC : 4 GB ~ 256 GB MLC : 8 GB ~ 512 GB ● 2.5" standard form factor ● Suitable for high demanding applications ● Well performed under harsh operating environment ● Anti-vibration & shock resistance ● Data integrity with Error Detection Code/Error Correction Code (EDC/ECC) ● Intelligent error recovery system ● Perfect replacement of hard drive ● High operating reliability & durability ● Enhanced power cycling management & Low power consumption ● iSMART disk health monitoring Axiomtek’s FSA (Flash SATA Disk) series is a high performance 2.5” flash disk and fully compatible with SATAIII standard which make it an ideal replacement for conventional SATA HDD without any driver or system modification. This 2.5” SATAIII flash disk is provided with huge capacities up to 256GB to meet diverse needs of data storage. With the features of high capacity storage, data integrity, anti-vibration and low power consumption, the FSA series is surely a solid solution for expanding an industrial computer’s memory. System Ordering Information General Specification Capacity SLC SLC : 4 GB ~ 256 GB MLC : 8 GB ~ 512 GB Interface SATA III 6.0 Gbp/s Connector 7+15 pin male Flash type SLC /MLC Form Factor 2.5” Data Transfer Rate SLC: Read: 68~490 MB/Sec (max.) Write: 52~430 MB/Sec (max.) MLC: Read: 120~290 MB/Sec (max.) Write: 20~260 MB/Sec (max.) Environmental Specification Operating Temperature 0˚C~70˚C (32°F ~158°F) (standard temp.) -40˚C~85˚C (-40 °F ~185°F) (industrial temp.) Storage Temperature -55˚C~95˚C (-67°F ~203°F) Humidity 10%~95% non-condensing Vibration 20G(7~2000Hz) Shock 1500G/0.5ms System Reliability ECC technology High reliability based on the internal ECC function MTBF >3,000,000 hours R/W Endurance 2,000,000 times Wear-leveling Support Power Requirment DC Input Voltage +5 DC +- 5% Power Consumption SLC (Target: 256 GB): Read: 482mA (max.) Write: 546mA (max.) Idle: 145mA (max.) MLC (Target: 512 GB): Read: 610mA (max.) Write: 870mA (max.) Idle: 110mA (max.) Physical Specification Enclosure Material Aluminum Mechanical Cover Dimensions 69.8 x 100 x 7.0mm (W x L x H) MLC 69.8 x 100 x 9.2mm (W x L x H) SLC *Tolerance ± 0.25mm Models (Standard temp. SLC) FSA004GSC1T FSA008GSC1T FSA016GSC1T FSA032GSC1T FSA064GSC1T FSA128GSC1T FSA256GSC1T Models (Industrial temp. SLC) FSA004GSW1T FSA008GSW1T FSA016GSW1T FSA032GSW1T FSA064GSW1T FSA128GSW1T FSA256GSW1T Interface Capacity SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G 4GB 8GB 16GB 32GB 64GB 128GB 256GB Interface Capacity SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G 8GB 16GB 32GB 64GB 128GB 256GB 512GB MLC Models (Standard temp. MLC) FSA008GMC1T FSA016GMC1T FSA032GMC1T FSA064GMC1T FSA128GMC1T FSA256GMC1T FSA512GMC1T Models (Industrial temp. MLC) FSA008GMW1T FSA016GMW1T FSA032GMW1T FSA064GMW1T FSA128GMW1T FSA256GMW1T FSA512GMW1T * All specifications and photos are subject to change without notice.