SBC81206 Series Quick Installation Guide Board Layout I. Checklist 9 SBC81206 Socket 775 All-In-One 9 COM & Printer Port Cable with Bracket, Pitch=2.54mm x 1 Board x 1 9 Quick Installation Guide x 1 9 2-pin Jumper Cap, Pitch=2.0mm x 5 9 SATA Cable x 1 9 Product Information CD-ROM x 1 Note: Please contact your local vendors if any damaged or missing items. DO NOT apply power to the board if any damaged components. II. Jumper Settings Before applying the power to SBC81206 Series, please make sure all jumper settings are defaulted as the following table: Description COM2 Function Jumper Setting JP3 JP2 JP1 RS-422 JP3 JP2 JP1 RS-485 JP3 JP2 JP1 RS-232 (Default) CMOS Clear 4 ©Copyright 2008 AXIOMTEK Co., Ltd. Version A1 December 2008 Printed in Taiwan 94181206010E Normal (Default) JP7 Clear CMOS JP7 ©Copyright 2008 AXIOMTEK Co., Ltd. Version A1 December 2008 Printed in Taiwan 94181206010E 1 Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities. Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities. V. SBC81206 Series Quick Installation Guide SBC81206 Series Quick Installation Guide ATX Auto Power On/Off Function Disable Jumper Setting JP6 JP6 Enable (Default) IV. III. Connectors Connector Label Connector Label LAN1 Link/Active & Speed SM BUS Connector CN1 LAN2 Link/Active & Speed LED Connector CN7 USB Port2 Connector USB4 ATX 4 Pin 12V In CN2 LAN1 Connector LAN1 Front Panel Connector CN3 LAN2 Connector LAN2 AXIOMTEK ACPI LED Connector CN6 VGA Connector PS/2 KB/MS Connector (Optional) CN5 DDRII Long-DIMM Sockets Parallel IDE Connector IDE1 System FAN Connector 1 FAN1 Floppy Connector FDD1 CPU FAN Connector FAN2 System FAN Connector 2 FAN3 Printer Port Connector PRINT1 Serial Port1 Connector COM1 Serial Port2 Connector COM2 USB Port4/5 Connector USB1 USB Port2/3 Connector USB2 USB Port1 Connector USB3 VGA1 Internal PS/2 Keyboard Connector Internal PS/2 Mouse Connector Header (Optional) -. The Power LED lights up when the system is powered ON. External Speaker and Internal Buzzer Connector Pin 2, 4, 6 and 8 can be connected to the case-mounted speaker unit or internal buzzer. While connecting the CPU card to an internal buzzer, please short pins 2-4; while connecting to an external speaker, you need to set pins 2-4 to Open and connect the speaker cable to pin 8 (+) and pin 2 (-). DDR1~2 ATX Power On/Off Button This 2-pin connector denoted as Pin 9 and 10 connects the front panel’s ATX power button to the CPU card, which allows users to control ATX power supply to be power on/off. KB1 System Reset Switch Pin 11 and 12 can be connected to the case-mounted reset switch that reboots MS1 your computer instead of turning OFF the power switch. It is a better way to reboot your system for a longer life of the system’s power supply. ® Intel HD Audio Digital Power LED This 3-pin connector denoted as Pin 1 and Pin 5 connects the system power LED indicator to such a switch on the case. Pin 1 is assigned as +, and Pin 5 as CN4 Connector 2 Front Panel Connector HDA1 Serial ATA Port Connectors SATA1~4 ©Copyright 2008 AXIOMTEK Co., Ltd. Version A1 December 2008 Printed in Taiwan 94181206010E HDD Activity LED This connection is linked to hard drive activity LED on the control panel. LED flashes when HDD is being accessed. Pin 13 and 14 connect the hard disk drive to the front panel HDD LED, Pin 13 assigned as -, and Pin 14 as +. ©Copyright 2008 AXIOMTEK Co., Ltd. Version A1 December 2008 Printed in Taiwan 94181206010E 3 Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities. Please refer to the SBC81206 Product Information CD for the complete User’s Manual, drivers and utilities. Description SBC81206 Series Quick Installation Guide