DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Right Angle DomiLEDTM High Brightness AlInGaP : DSx-PSS Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > > High brightness surface mount LED. Designed for sideway illumination. 120° viewing angle. Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. Viewing Angle˚ DSA-PSS-VW1-1 Amber, 615nm 120 715.0 1050.0 1400.0 DSA-PSS-V2W-1 Amber, 615nm 120 900.0 1350.0 1800.0 DSY-PSS-VW1-1 Yellow, 587nm 120 715.0 1050.0 1400.0 Not for new design NOTE 1. All part number above comes in a quantity of 2500 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Please contact marketing for special part number Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Min. (V) Typ. (V) 1.8 2.1 DSx-PSS Vr @ Ir = 10uA Max. (V) 2.5 Min. (V) 12 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 200 mA Reverse voltage 12 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 125 mW - Junction / ambient, Rth JA 520 K/W - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 5 mm2 per pad) 280 K/W Power dissipation (at room temperature) Thermal resistance 2 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of λ dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TC λ Part Number dom (typ) TCV Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) TCIV IF = 20mA; 0 ˚C <= T <= 100 ˚C Value DSA-PSS 0.06 DSY-PSS 0.08 DSA-PSS -2.0 DSY-PSS -1.9 DSA-PSS -0.65 DSY-PSS -1.00 Unit nm / K mV / K %/K Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) Full 610 - 621 W 610 - 615 X 615 - 621 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DSA; Amber DSY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group V1 715.0 ... 900.0 V2 900.0 ... 1125.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 Luminous intensity is measured with an accuracy of ± 11%. 3 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination ForwardVoltage CurrentVs VsForward ForwardCurrent Voltage Forward Relative Intensity Forward Current Relative Luminous Intensity Vs Forward Current Relative Intensity VsVs Forward Current 100 35 2.4 Forward Current, mA V Forward Voltage; Forward Current, mA Relative Intensity, Normalized at 20mA Relative Intensity; Normalized at 20mA Relative Intensity; Normlaized at 50mA 3 2.2 2.2 2 2 2.5 1.8 1.8 1.6 1.6 2 1.4 1.4 1.2 1.2 1.5 1 1 0.8 0.8 1 0.6 0.6 0.4 0.4 0.5 0.2 0.2 0 0 AS AlInGaP 60 20 250 15 40 TS AlInGaP 30 10 1.8 20 5 10 1.6 0 0 0 90 30 80 2.225 70 10 1020 20 40 20 30 30 60 40 40 8050 60 50100 3 301.6 403.5 4 702.4 804.5 1 101.2 201.4 1.8 50 2 602.2 2.6 02.5 Forward Voltage, Forward Current; mAV Forward Forward Current, Forward Current, mAmA Multiple X-Y Plot vsWavelength Wavelength RelativeIntensity Intensity Relative VsVs 60 25 30 50 20 25 1 1 1 30 15 10 20 10 0.8 0.70.7 Yellow 0.6 0.6 0.6 Green 0.50.5 0.30.3 Super Red 0.10.1 000 0 10 40 40 50 9080 100 60 100 10 20 2020 3030 40 50 60 60 70 7080 80 90 110 100120 0 Red Yellow 0.4 0.4 0.4 0 0 400 500 500 500 450 500 550 650 600 650 800 700 550 600 700 750 550 650 700 600600 700 750 800 Wavelength; nm Wavelength; nm Wavelength Ambient Temperature Ambient Temperature Ambient Temperature Radiation Pattern Wavelength vs Forward Current (True Green) Allowable Forward Shift Current Vs Duty ratio (Ta=25 Deg C, tp<10us) 30° 20° 10° 14 3.2 12 40°2.8 0.8 Wavelength Shift; nm Wavelength nm (mA) Allowable ForwardShift; Current Wavelength Shift Vs Forward Current (Blue) 0° 1.0 3.6 1000 2.4 2 100 50° 0.6 1.6 1.2 0.4 60°0.8 0.4 10 70° Ambe Amber Orange 0.2 0.2 0.2 5 10 5 Yello Amber Pure Green 0.8 0.8 40 15 20 Variable 0.90.9 Relative Intensity 35 Forward Forward Current, mA Forward Current, mA Maximum Current Temperature Maximum Current Temperature Maximum Forward Current VsVs Ambient Temperature 0.2 0 80°-0.4 -0.8 -1.2 1 0 1 10 20 10 8 6 4 2 0 -2 -4 0 90° 10 -6 30 40 50 100 0 10 20 30 40 50 Forward Current; mA Duty Current; Ratio, % mA Forward 4 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination DomiLED • AllnGaP : DSx-PSS Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 5 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Recommended Solder Pad 6 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2500 units. • Reel diameter is 180 mm. 7 26/06/2015 V4.0 DOMINANT DOMINANT TM TM AllnGaP :: DSx-PSS DDx-xRS AllnGaP Opto Technologies Technologies Opto Innovating Illumination Innovating Illumination Packaging Specification Specification Packaging 10 8 28/10/2010 V8.0 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (2500pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Right Angle DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 37,500 MAX Large 416 x 516 x 476 1.74 96 reels MAX 240,000 MAX 9 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 10 26/06/2015 V4.0 DOMINANT TM AllnGaP : DSx-PSS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 23 Sep 2011 2 Not for new design: DSA-PSS-VW1-1 Add new partno: DSA-PSS-V2W-1 17 Feb 2012 8 Error in carrier tape 21 Jun 2012 2, 3 Add Thermal Resistance Add Characteristics 26 Jun 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 11 26/06/2015 V4.0 DOMINANT TM Opto Technologies AllnGaP : DSx-PSS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM