DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Multi DomiLEDTM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Multi DomiLED TM Synonymous with function and performance, the Multi DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > High brightness tri-color surface mount LED. > Capable for all vidoe-standards. > > > > > > The RGB-LED chips can be controlled separately. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Display: full color display video notice board. > General Lighting: architectural lighting, decorative lighting © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number DMRTB-UJB-ST3+UV3+RS3-1 Color, λdom (nm) Chip #1 Chip #2 Chip #3 Red True Green Blue 625nm 525nm 470nm Luminous Intensity @ IF = 20mA IV (mcd) Chip #1 Chip #3 Chip #2 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 140.0 200.0 285.0 285.0 400.0 560.0 100.0 140.0 200.0 NOTE 1. Reel comes in a quantity of 2050 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. All electrical and optical data are measured at room temperature; Ta = 25˚C. Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Typ. (V) Max. (V) Temperature Coefficient of Vf (If=20mA; -10oC<T<100oC) Red 1.80 2.45 -2.00 True Green 3.70 4.25 -3.60 Blue 3.60 4.25 -3.10 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. 2 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit Red=30; True Green, Blue=20 mA Red=1000; True Green, Blue=200 mA Reverse voltage Red=12; True Green, Blue=5 V Power consumption Red=75; True Green, Blue=85 V 1 chip on Red=480; True Green, Blue=530 K/W 3 chips on Red=770; True Green, Blue=820 DC forward current Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) Thermal resistance junction/ambient, Rth JA Thermal resistance junction/solder point, Rth JS 1 chip on Red=260; True Green, Blue=290 3 chips on Red=420; True Green, Blue=470 LED junction temperature K/W 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C Characteristics at Tj=25˚C Temperature Coefficient (If=20mA; -10oC<T<100oC) λpeak (nm/K) λdom (nm/K) Red 0.15 0.05 True Green 0.04 0.03 Blue 0.04 0.02 3 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C If wavelength binning is required, only one wavelength group is allowed for each chip within a reel. Color Group Wavelength distribution (nm) Red Full 618 - 628 True Green Full 521 - 536 Blue A 521 - 526 B 526 - 531 C 531 - 536 Full 465 - 475 A 465 - 470 B 470 - 475 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Only one IV group is allowed for each chip within reel. Brightness Group Chip #1 Luminous Intensity @ IV (mcd) Chip #2 Chip #3 S3U3R3 140.0...200.0 285.0...400.0 100.0...140.0 S3U3S3 140.0...200.0 285.0...400.0 140.0...200.0 S3V3R3 140.0...200.0 400.0...560.0 100.0...140.0 S3V3S3 140.0...200.0 400.0...560.0 140.0...200.0 T3U3R3 200.0...285.0 285.0...400.0 100.0...140.0 T3U3S3 200.0...285.0 285.0...400.0 140.0...200.0 T3V3R3 200.0...285.0 400.0...560.0 100.0...140.0 T3V3S3 200.0...285.0 400.0...560.0 140.0...200.0 Luminous intensity is measured with an accuracy of ± 11%. 4 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Wavelength Shift Vs Forward Current 7 2.2 2 5.5 AlInGaP 1.8 1.6 1.4 1.2 4 Wavelength Shift, nm Relative Intensity, Normalized at 20mA Luminous Intensity Vs Forward Current InGaN 1 0.8 0.6 Blue 2.5 1 -0.5 -2 -3.5 0.4 -5 0.2 -6.5 0 Green -8 0 10 20 30 40 50 60 5 10 15 20 25 30 35 40 45 50 55 Forward Current, mA Forward Current, mA Wavelength Distribution Forward Current Vs Forward Voltage 1 35 30 True Green 0.8 0.7 0.6 Forward Current, mA Relative Intensity 0.9 Red Blue 0.5 0.4 0.3 0.2 25 20 Red 15 10 5 0.1 0 0 400 450 500 550 600 650 700 750 800 1 1.5 Wavelength, nm 2.5 3 3.5 4 4.5 Forward Voltage, V Radiation Pattern Forward Current Vs Forward Voltage 30° 20° 10° 0° 1.0 35 30 Forward Current, mA 2 40° Blue & True Grren 0.8 25 20 50° 0.6 60° 0.4 15 10 70° 5 0.2 80° 0 1 1.5 2 2.5 3 3.5 4 90° 4.5 0 Forward Voltage, V 5 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Maximum Forward Current Vs Temperature (1 chip on) Maximum Forward Current Vs Temperature (3 chips on) 35 35 Red Red 30 Forward Current, mA Forward Current, mA 30 25 True Green 20 15 Blue 10 5 25 True Green 20 15 Blue 10 5 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature Ambient Temperature Maximum Forward Current Vs Temperature (1 chip on) Maximum Forward Current Vs Temperature (3 chips on) 35 35 Red Red 30 25 Forward Current, mA Forward Current, mA 30 True Green 20 15 10 Blue 5 25 True Green 20 15 10 Blue 5 0 0 0 10 20 30 40 50 60 70 80 90 100 0 Solder Point Temperature Ts 10 20 30 40 50 60 70 80 90 100 Solder Point Temperature TS 6 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Multi DomiLED • DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn Plating 7 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Recommended Solder Pad 8 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2050 units. • Reel diameter is 180 mm. 9 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Packaging Specification 10 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2050pcs) 0.034 0.034 190 ±190 10 ± 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Multi DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.3 15 reels MAX 30,750 MAX Large 416 x 516 x 476 1.4 96 reels MAX 196,800 MAX 11 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 13/03/2014 V6.0 DOMINANT TM DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - New Format 27 Nov 2006 3 Print error on Thermal resistance junction/solder point, Rth JS 04 May 2009 2, 9 & 11 Amend standard packing --> 2050 units per reel 20 Oct 2009 - Update company name 04 May 2010 11 Typo error on packaging specification 13 Mar 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes at any time without prior notice to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 13/03/2014 V6.0 DOMINANT TM Opto Technologies DMRTB-UJB-ST3+UV3+RS3-1 : Tri-Color Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM