DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN White : DDW-LJG TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > High brightness surface mount LED. > Based on InGaN technology. > > > > > 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer appliances: LCD illumination as in PDAs, LCD TV. > Communication: mobile phone flash light, backlights in mobile phone display. > Display: full color display video notice board. > Industrial: general lighting © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Color DDW-LJG-WX1-1 White 120 DDW-LJG-W2X-1 White 120 Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. Luminous Flux Typ. 1125.0 1800.0 2240.0 5250.0 1400.0 2240.0 2850.0 6534.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performace Current pushing should is used for dimming purposes. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.8 3.2 3.6 5.0 DDW-LJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 110 mW 340 K/W 180 K/W Reverse voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination DDW, White Color Grouping 4 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3386 0.3235 0.3386 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 White Bin Structure 1 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3386 0.3235 0.3386 0.3426 0.3100 0.2970 0.3070 0.3120 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 0.3900 0.3800 0.3700 PL 0.3600 OL 0.3500 NL 0.3400 0.3300 ML 0.3200 0.3100 OK NK MK LL 0.3000 PK LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2960 0.2910 0.3005 0.3045 Cy 0.2590 0.2680 0.2825 0.2715 Cx 0.291 0.2850 0.2960 0.3005 Cy 0.2680 0.2790 0.2955 0.2825 Cx 0.3045 0.3005 0.3100 0.3130 Cy 0.2715 0.2825 0.2970 0.2840 Cx 0.3005 0.2960 0.3070 0.3100 Cy 0.2825 0.2955 0.3120 0.2970 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3081 0.3282 0.3426 0.3235 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3282 0.3453 0.3591 0.3426 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3235 0.3426 0.3571 0.3388 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3426 0.3591 0.3730 0.3571 Cx 0.3100 0.3197 0.3205 0.3130 Cy 0.2970 0.3131 0.2956 0.2840 Cx 0.3070 0.3189 0.3197 0.3100 Cy 0.3120 0.3302 0.3131 0.2970 Bin JK JL KK KL NK NL OK OL LK LL 3 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.3197 0.3288 0.3288 0.3205 Cy 0.3131 0.3282 0.3081 0.2956 Cx 0.3189 0.3288 0.3288 0.3197 Cy 0.3302 0.3452 0.3282 0.3131 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3388 0.3571 0.3715 0.3542 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3571 0.3730 0.3792 0.3715 Bin MK ML PK PL InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 4 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination DDW, White Color Grouping White Bin Structure 0.44 0.42 0.40 E3 0.38 E4 E1 0.36 C3 0.34 C1 0.32 A1 0.28 C4 C2 A3 0.30 E2 A4 A2 0.26 0.24 0.22 0.20 0.18 0.16 0.26 0.28 0.30 0.32 0.34 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3561 0.3768 0.3943 0.3736 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3386 0.3593 0.3768 0.3561 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3768 0.3975 0.4150 0.3943 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3593 0.3800 0.3975 0.3768 Bin A1 A2 A3 A4 C1 C2 C3 C4 E1 E2 E3 E4 5 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) V1 2.75 ... 3.05 V2 3.05 ... 3.35 V3 3.35 ... 3.65 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 6 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination 2.2 2.2 Forward Current Vs Forward Voltage 50 Variables 2 Col_2 1.8 1.8 Forward Current; mA Relative Intensity; Normalized at 20mA Relative Luminous Intensity Vs Forward Current Multiple X-Y Plot 1.6 1.6 1.4 1.4 1.2 1.2 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 00 30 20 10 0 0 0 10 10 20 20 30 30 40 40 50 50 2 2.5 3 3.5 4 ForwardCol_1 Current, mA Forward Voltage; V Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength 35 1 0.9 30 0.8 25 Relative Intensity Forward Current; mA 40 20 15 10 0.7 0.6 0.5 0.4 0.3 0.2 5 0.1 0 0 0 10 20 30 40 50 60 70 80 400 90 100 Ambient Temperature 450 500 550 600 650 700 750 Wavelength; nm Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 7 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination DomiLED • InGaN White: DDW-LJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 8 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Recommended Solder Pad 9 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 10 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Packaging Specification 11 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 12 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 13 09/01/2014 V6.0 DOMINANT TM InGaN White: DDW-LJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 18 Apr 2012 2 Add Thermal Resistance 06 Jun 2012 5 Update Color Bin Structure 19 Dec 2012 2 Add new partno: DDW-LJG-W2X-1 26 Jun 2013 7 Update graph: Relative Luminous Intensity Vs Forward Current 13 Sep 2013 6 Add Vf Binning 09 Jan 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes at to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 09/01/2014 V6.0 DOMINANT TM Opto Technologies InGaN White: DDW-LJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM