Data Sheet

DOMINANT
Opto Technologies
Innovating Illumination
Power DomiLED
TM
DATA SHEET:
Power DomiLEDTM
InGaN White : DWW-LJG
TM
With its significant power in terms brightness, viewing angle and variety of
application possibilities, Power DomiLED™ truly is a standout performer!
Ideal for automotive interior lighting as well as home, office and industrial
applications, it is also a proven performer in electronic signs and signals.
Features:
>
>
>
>
>
>
High brightness surface mount LED.
120° viewing angle.
Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm.
Qualified according to JEDEC moisture sensitivity Level 2.
Compatible to IR reflow soldering.
Environmental friendly; RoHS compliance.
Applications:
> Automotive: interior applications, eg: switches, telematics,
climate control system, dashboard, etc.
exterior applications, eg: signal lighting,
Center High Mounted Stop Light (CHMSL),
> Display: full color display video notice board.
> Industry: white goods (eg: Oven, microwave, etc.).
> Lighting: architecture lighting, general lighting, garden light, etc
© 2005 DomiLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specifications are subject to change without notice.
1
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Optical Characteristics (Tj=25˚C)
Viewing
Total Flux
Luminous Intensity @ IF = 30mA IV (mcd)
Angle˚ IF=30mA, mlm (typ)
Min.
Typ.
Max.
Part Ordering
Number
Color
DWW-LJG-W2X-1
White
120
7000
1400.0
2240.0
2850.0
DWW-LJG-XY1-1
White
120
8900
1800.0
2850.0
3550.0
NOTE
1. All part number above comes in a quantity of 2000 units per reel.
2. Luminous intensity is measured with an accuracy of ± 11%.
3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance.
Current pulsing should be used for dimming purposes.
Electrical Characteristics at Tj=25˚C
Vf @ If = 30mA
Vr @ Ir = 10uA
Part Number
Min. (V)
Typ. (V)
Max. (V)
DWW-LJG
2.90
3.25
3.60
Min. (V)
5
Forward voltages, Vf is measured with an accuracy of ± 0.1V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
50
mA
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005)
300
mA
5
V
ESD threshold (HBM)
2000
V
LED junction temperature
125
˚C
Operating temperature
-40 … +110
˚C
Storage temperature
-40 … +110
˚C
200
mW
300
K/W
130
K/W
Reverse voltage; Ir (max) = 10µA
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, Rth JA
- Junction / solder point, Rth JS
(Mounting on FR4 PCB, pad size >= 16 mm2 per pad)
2
23/01/2014 V5.0
2
0.2910
0.2680
0.2850
0.2790
0.3005
0.2825
0.2960
0.2955
0.3288
0.3282
0.3288
0.3453
0.3386
0.3426
0.3386
0.3591
0.3197
0.3131
0.3189
0.3302
0.3288
0.3282
0.3288
0.3452
0.3484
0.3571
0.3484
0.3730
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
DWW, White Color Grouping
3
0.3005
0.2825
0.2960
0.2955
0.3100
0.2970
0.3070
0.3120
0.3386
0.3426
0.3386
0.3591
0.3484
0.3571
0.3484
0.3730
0.3205
0.2956
0.3197
0.3131
0.3288
0.3081
0.3288
0.3282
0.3582
0.3715
0.3582
0.3792
4
0.3045
0.2715
0.3005
0.2825
0.3130
0.2840
0.3100
0.2970
0.3386
0.3235
0.3386
0.3426
0.3484
0.3388
0.3484
0.3571
0.3130
0.2840
0.3100
0.2970
0.3205
0.2956
0.3197
0.3131
0.3582
0.3542
0.3582
0.3715
1
0.2960
0.2590
0.291
0.2680
0.3045
0.2715
0.3005
0.2825
0.3288
0.3081
0.3288
0.3282
0.3386
0.3235
0.3386
0.3426
0.3100
0.2970
0.3070
0.3120
0.3197
0.3131
0.3189
0.3302
0.3484
0.3388
0.3484
0.3571
0.3800
0.3700
JL
KK
KL
NK
NL
OK
OL
LK
LL
MK
ML
PK
PL
PL
0.3600
OL
PK
0.3500
NL
0.3400
0.3300
ML
0.3100
MK
LL
0.3000
OK
NK
0.3200
LK
KL
0.2900
KK
JL
0.2800
0.2700
JK
0.2600
0.2500
0.2400
0.2300
0.2700
0.2800
0.2900
0.3000
0.3100
0.3200
0.3300
0.3400
0.3500
0.3600
0.3700
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
1
2
3
4
Cx
0.2960
0.2910
0.3005
0.3045
Cy
0.2590
0.2680
0.2825
0.2715
Cx
0.291
0.2850
0.2960
0.3005
Cy
0.2680
0.2790
0.2955
0.2825
Cx
0.3045
0.3005
0.3100
0.3130
Cy
0.2715
0.2825
0.2970
0.2840
Cx
0.3005
0.2960
0.3070
0.3100
Cy
0.2825
0.2955
0.3120
0.2970
Cx
0.3288
0.3288
0.3386
0.3386
Cy
0.3081
0.3282
0.3426
0.3235
Cx
0.3288
0.3288
0.3386
0.3386
Cy
0.3282
0.3453
0.3591
0.3426
Cx
0.3386
0.3386
0.3484
0.3484
Cy
0.3235
0.3426
0.3571
0.3388
Cx
0.3386
0.3386
0.3484
0.3484
Cy
0.3426
0.3591
0.3730
0.3571
Cx
0.3100
0.3197
0.3205
0.3130
Cy
0.2970
0.3131
0.2956
0.2840
Cx
0.3070
0.3189
0.3197
0.3100
Cy
0.3120
0.3302
0.3131
0.2970
Cx
0.3197
0.3288
0.3288
0.3205
Cy
0.3131
0.3282
0.3081
0.2956
Cx
0.3189
0.3288
0.3288
0.3197
Cy
0.3302
0.3452
0.3282
0.3131
Cx
0.3484
0.3484
0.3582
0.3582
Cy
0.3388
0.3571
0.3715
0.3542
Cx
0.3484
0.3484
0.3582
0.3582
Cy
0.3571
0.3730
0.3792
0.3715
Bin
JK
White Bin Structure
0.3900
InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance.
Current pulsing should be used for dimming purposes.
3
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Luminous Intensity Group at Tj=25˚C
Luminous Intensity
IV (mcd)
Brightness Group
W2
1400.0 ... 1800.0
X1
1800.0 ... 2240.0
X2
2240.0 ... 2850.0
Y1
2850.0 ... 3550.0
Luminous intensity is measured with an accuracy of ± 11%.
4
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Forward Current Vs Forward Voltage
60
2.5
2.5
Forward
Forward Current,
Current, mA
mA
2
Relative Intensity
Relative Intensity; Normalized at 30mA
Relative Intensity Vs Forward Current
1.5
1.5
1
0.5
0.5
40
30
20
10
0
0
0
10
20
30
40
50
60
70
80
2.5
90 100
3
3.5
4
4.5
Forward
Current,mA
mA
Forward Current,
Forward Voltage, V
Forward Current
Ambient
Maximum
ForwardVs
Current
Vs Temperature
Temperature
Relative
Intensity
Vs Wavelength
Wavelength
Vs Forward
Current
60
55
1
50
50
45
0.9
Relative
Relative Intensity
Intensity
Forward Current; mA
50
40
40
35
30
30
25
20
20
15
0.8
0.7
0.6
0.5
0.4
0.3
0.2
10
0.1
5
0
0
0
300
400
10 20
100 100
110 110
120
20 30
30 4040 5050 606070 7080 8090 90
450
500
550
700
600
650
900
700
750
1100
800
Wavelength, nm
Ambient
Temperature
Temperature
Radiation Pattern
30°
20°
10°
0°
1.0
40°
0.8
50°
0.6
60°
0.4
70°
0.2
80°
90°
0
5
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Power DomiLED • InGaN White : DWW-LJG Package Outlines
TM
Material
Material
Lead-frame
Cu Alloy With Ag Plating
Package
High Temperature Resistant Plastic, PPA
Encapsulant
Silicone Resin
Soldering Leads
Sn-Sn Plating
6
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Recommended Solder Pad
7
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Taping and orientation
• Reels come in quantity of 2000 units.
• Reel diameter is 180 mm.
8
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Packaging Specification
9
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : product quantity per reel S/N : serial no D/C: date code
GROUP : group
Reel
Label
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc Power DomiLED
1 completed bag (2000pcs)
0.034
0.034
190 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
For Power DomiLED
Cardboard Box
Size
TM
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
30,000 MAX
Large
416 x 516 x 476
1.74
96 reels MAX
192,000 MAX
10
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
225
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
11
23/01/2014 V5.0
DOMINANT
TM
InGaN White : DWW-LJG
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Initial Release
05 Apr 2012
2
Update Thermal Resistance
13 Mar 2013
2
Update Operating Temperature and
Storage Temperature
19 Aug 2013
2
Add new partno: DWW-LJG-XY1-1
05 Sep 2013
2
Typo error on Vf
23 Jan 2014
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies.
12
23/01/2014 V5.0
DOMINANT
TM
Opto Technologies
InGaN White : DWW-LJG
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia.
Tel: +606 283 3566 Fax: +606 283 0566
E-mail: sales@dominant-semi.com
DOMINANT
Opto Technologies
Innovating Illumination
TM