DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: 5mm Lamp AlInGaP : High Brightness Lamp Type LED - 5mm Round Synonymous with function and performance, the 5mm Round LED has superior performance in outdoor applications due to its well-defined radiation pattern and wide viewing angle. These lamps are made with an advanced optical grade epoxy, offering superior high temperature and high moisture resistance performance in outdoor signal and sign applications Features: > > > > High brightness LED lamp. Narrow viewing angle; 15o, 30o and 60o Superior resistance to moisture. Suitable for TTW soldering. Applications: > Full color signs > Outdoor displays/signs All rights reserved. Product specifications are subject to change without notice. 1 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. L5S-R1500-ZAB-1 Super red, 632nm 15 4500.0 7150.0 11250.0 L5S-R3000-XY2-1 Super red, 632nm 30 1800.0 2850.0 4500.0 L5S-R60E0-UV2-1 Super red, 632nm 60 450.0 715.0 1125.0 L5R-R1500-AAD-1 Red, 625nm 15 7150.0 11250.0 18000.0 L5R-R3000-W2Y1-1 Red, 625nm 30 1400.0 2240.0 3550.0 L5R-R3000-YZ2-1 Red, 625nm 30 2850.0 4500.0 7150.0 L5R-R3000-ZAA-1 Red, 625nm 30 4500.0 7150.0 9000.0 L5R-R60E0-VW2-1 Red, 625nm 60 715.0 1125.0 1800.0 L5A-R1500-AAD-1 Amber, 615nm 15 7150.0 1125.0 18000.0 L5A-R3000-YZ2-1 Amber, 615nm 30 2850.0 4500.0 7150.0 L5O-R1500-AAD-1 Orange, 605nm 15 7150.0 11250.0 18000.0 L5O-R3000-Y2AA-1 Orange, 605nm 30 3550.0 7150.0 9000.0 L5O-R60E0-U2W1-1 Orange, 605nm 60 560.0 900.0 1400.0 L5Y-R1500-AAD-1 Yellow, 588nm 15 7150.0 11250.0 18000.0 L5Y-R3000-WX2-1 Yellow, 588nm 30 1125.0 1800.0 2850.0 L5Y-R3000-YZ2-1 Yellow, 588nm 30 2850.0 4500.0 7150.0 L5Y-R3000-ZAA-1 Yellow, 588nm 30 4500.0 7150.0 9000.0 L5Y-R60E0-U2W1-1 Yellow, 588nm 60 560.0 900.0 1400.0 Not for new design NOTE 1. Luminous intensity is measured with an accuracy of ± 15%. 2. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each pack. 2 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Min. (V) L5x-R1500, L5x-R3000, Vr @ Ir = 10uA Typ. (V) Max. (V) 2.1 2.6 1.8 Min. (V) 12 L5x-R60E0 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 200 mA Reverse voltage ; Ir (max) = 10µA. 12 V ESD threshold (HBM) 2000 V LED junction temperature 120 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C Power dissipation (at room temperature) 130 mW Thermal resistance junction to solder, Rth JS 240 K/W Characteristics Symbol Temperature coefficient of O dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TC Value O dom (typ) TCV TCIV 3 Unit L5R-Rxxxx 0.03 nm / K L5A-Rxxxx 0.04 nm / K L5Y-Rxxxx 0.05 nm / K L5R-Rxxxx -2.5 mV / K L5A-Rxxxx -1.9 mV / K L5Y-Rxxxx -2.1 mV / K L5R-Rxxxx -0.44 %/K L5A-Rxxxx -0.55 %/K L5Y-Rxxxx -0.79 %/K 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) L5S; Super red Full 625 - 640 L5R; Red Full 620 - 630 L5A; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 L5O; Orange L5Y; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group U1 450.0...560.0 U2 560.0...715.0 V1 715.0...900.0 V2 900.0...1125.0 W1 1125.0...1400.0 W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Y2 3550.0...4500.0 Z1 4500.0...5600.0 Z2 5600.0...7150.0 AA 7150.0...9000.0 AB 9000.0...11250.0 AC 11250.0...14000.0 AD 14000.0...18000.0 Luminous intensity is measured with an accuracy of ± 15%. 4 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) V2 1.80 ... 2.00 V3 2.00 ... 2.20 V4 2.20 ... 2.40 V5 2.40 ... 2.60 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Parts with the Vf binning option will be defined as L5x-Rxxxx-xxxx-x-Vx. Please consult sales and marketing for special part number to incorporate Vf binning. 5 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Forward Voltage Forward Current CurrentVs VsForward Forward Voltage 3.53.5 2.5 60 2.4 3 3 Forward Voltage, V Forward Current, mA Relative at 20mA 20mA RelativeIntensity; Intensity; Normalized Normalized at RelativeRelative Luminous Intensity Vs Forward Current Intensity Vs Forward Current 2.52.5 2 2 1.51.5 1 1 0.50.5 2.2 40 2.1 2 30 1.9 20 1.8 1.7 10 1.6 0 0 0 0 50 2.3 1.50 1010 2020 3030 40 40 50 50 60 60 02 10 2.5 20 ForwardCurrent, Current;mA mA Forward 50 3.5 60 470 804.5 Forward Current, mAV Forward Voltage, Maximum Current Vs Temperature Maximum Current Vs Ambient Temperature o) DominantRadiation Wavelength Shift Vs Forward Current Plot ofPattern R30 vs V30 (2Ө=30 60 30 1 12 10 50 25 Relative Intensity Forward Current; mA Forward Current, mA 30 3 40 40 20 30 15 20 10 10 5 8 6 0.54 2 0 -2 0 0 0 -4 70 80 80 90 90 100 100 0 0 1010 2020 3030 4040 5050 6060 70 -90 0 AmbientTemperature Temperature Ambient -60 5 -30 10 015 3020 6025 90 30 Viewing Angle (Degree) Forward Current, mA o) Radiation Plot ofPattern R15 vs (2Ө=15 V15 Plot ofPattern R60 vsVsV60 Relative Inyensity Wavelength o) Radiation (2Ө=60 1 1 1 0.8 Relative Intensity RelativeCurrent; Intensity Forward mA 0.9 0.7 0.6 0.50.5 0.4 0.3 0.5 0.2 0.1 0 0 0 450 -90400 -60 500 -30 550 0600 650 30 70060750 800 90 -90 Wavelength, nm Viewing Angle (Degree) -60 -30 0 30 60 90 Viewing Angle (Degree) 6 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Allowable Forward Current VS Duty Ratio Allowable Forward Vs Duty Ratio ( Ta=25 DegCurrent C, tp<10uS) Relative Intensity Vs Wavelength 1 100 10 Red Orange 0.8 Super red Yellow 0.7 0.6 0.5 0.4 0.3 0.2 0.1 1 0 1 10 500 100 550 600 650 700 750 Duty ratio, % Wavelength; nm Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio 1000 1000 Allowable Forward Current; mA Allowable Forward Current; mA Amber 0.9 Relative Intensity Allowable Forward Current; mA 1000 100 10 1 1 10 100 10 1 1 100 Duty ratio, % 10 100 Duty ratio, % 7 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination 5mm Lamp • AlInGaP : High Brightness Package Outlines Epoxy meniscus may extend 1.5mm max. down the LED 8 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination 5mm Lamp • AlInGaP : High Brightness Package Outlines Epoxy meniscus may extend 1.5mm max. down the LED Parts with the stand-off option will be defined as L5x-RxxxS-xxxx-1 Option with stand-off - Parts with 15o viewing angle; H = 12.6mm ± 0.5mm Parts with 30o viewing angle; H = 12.0mm ± 0.5mm Parts with 60o viewing angle; H = 12.5mm ± 0.5mm 9 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Packaging Specification 1. Loose pack of 500pcs/pack: L5x-Rxxxx-xxxx-x-x-0 Weight Weight(gram) (gram) Average 1pc 5mm Lamp 1 completed pack (500pcs) 0.29 0.034 155 ± 10 190 10 Barcode label DOMINANT LOT NO : lotno PART NO : partno ROHS Compliant PB Free QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group 10 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Packaging Specification 2. Ammopack: L5x-Rxxxx-xxxx-x-x-A Average 1pc 5mm Lamp (g) 0.29 Box Dimensions (mm) Empty Box Weight (kg) 335 x 235 x 48 0.14 Quantity / Box (pcs) 2,000 1 Completed Box With Units (kg) 0.95 ± 10 Barcode label + DOMINANT LOT NO : lotno PART NO : partno ROHS Compliant PB Free QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Cat - hod e 11 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Packaging Specification 3. Reel: L5x-Rxxxx-xxxx-x-x-T Label Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Average 1pc 5mm Lamp (g) Empty Reel Weight (kg) 0.29 0.39 Quantity / Reel (pcs) 1,300 12 1 Completed Reel (kg) 0.95 ± 10 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Packaging Specification 13 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Recommended TTW Soldering Profile (acc. to CECC 00802) Standard curve 300 Limit Curve 10s T (˚C) 250 235˚C…260˚C 2nd 1st 200 5˚C/s ca 200˚C/s 150 2˚C/s 100˚C…130˚C 100 2˚C/s Forced cooling 50 0 0 25 50 75 100 125 150 175 200 225 250 T (˚C) 14 05/09/2013 V12.0 DOMINANT TM AlInGaP: High Brightness Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 2 Add new partno: L5O-R3000-YZ2-1 16 Sep 2008 3 Correction on partno: L5O-R3000-Y2AA-1 21 Nov 2008 3 Add new partno: L5O-R60E0-U2W1 16 Jan 2009 2 Not for new design: L5Y-R3000-WX2-1 02 Sep 2009 2 Add new partno: L5Y-R3000-ZAA-1 07 Oct 2009 2 Add new partno: L5S-R1500-ZAB-1 L5S-R3000-XY2-1 L5S-R60E0-UV2-1 30 Oct 2009 - Update new company name 18 Jun 2010 2 Add new partno: L5R-R3000-ZAA-1 05 Oct 2010 2 Not for new design: L5R-R3000-W2Y1-1 13 Sep 2012 2 Not for new design: L5Y-R3000-YZ2-1 05 Sep 2013 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 15 05/09/2013 V12.0 DOMINANT TM Opto Technologies AlInGaP: High Brightness Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM