DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: KNovaTM AlInGaP : NKx-NGG KNova TM Featuring a staggering brilliance and significant flux output, the KNova™ showcases the latest technological advent in this range. With its extremely high level of brightness it is highly suitable for both conventional lighting and specialized application such as automotive signal lights, traffic lights, channel lights, tube lights and garden lights among others. Features: > > > > > > > Super high brightness surface mount LED. 120° viewing angle. Designed for high current drive; max current rated at 1 A. Low thermal resistance; Rth (js) = 8 K/W. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to industrial standard IR reflow soldering process. Environmental friendly; RoHS compliance. Applications: > > Automotive: exterior applications Lighting: architecture lighting, general lighting, garden light, channel light. All rights reserved. Product specifications are subject to change without notice. 1 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Viewing Angle˚ Color Luminous Flux @ 400mA (lm) Min. Typ. Max. Luminous Flux @ 700mA Typ. NKR-NGG-R3S-1 Red, 625nm 120 45.2 50.0 67.2 85.0 NKA-NGG-R3S-1 Amber, 615nm 120 45.2 55.0 67.2 95.0 NKY-NGG-R3S-1 Yellow, 587nm 120 45.2 48.0 67.2 82.0 NKY-NGG-RS2-1 Yellow, 587nm 120 39.8 45.0 59.0 77.0 NOTE 1. Luminous flux is measured with an accuracy of ± 11%. 2. Luminous flux is measured with a 25 ms pulse. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Tj=25˚C Part Number NKx-NGG Vf @ If = 400mA Min. (V) 2.0 Typ. (V) 2.3 Max. (V) 3.0 Vf @ If = 700mA Vr @ Ir = 10uA Typ. (V) Min. (V) 2.6 12 Forward voltage are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 1000 mA Peak pulse current 1000 mA 12 V ESD threshold (HBM) 2000 V LED junction temperature 135 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +115 ˚C Reverse voltage 2 24/05//2011 V5.0 DOMINANT TM AlInGaP: NKx-NGG Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of O dom (typ) IF = 400mA; 0 ˚C <= T <= 85 ˚C TC O Part Number dom (typ) Temperature coefficient of VF (typ) IF = 400mA; 0 ˚C <= T <= 85 ˚C TCV Temperature coefficient of Total Flux (typ) IF = 400mA; 0 ˚C <= T <= 100 ˚C TCIV Value NKR-NGG 0.06 NKA-NGG 0.07 NKY-NGG 0.09 NKR-NGG -1.7 NKA-NGG -1.7 NKY-NGG -1.7 NKR-NGG 0.67 NKA-NGG 0.79 NKY-NGG 1.05 Unit nm / K mV / K %/K Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) NKR; Red Full 619 - 630 NKA; Amber Full 610 - 620 A 610 - 615 B 615 - 620 Full 585 - 597 A 585 - 588 B 588 - 591 C 591 - 594 D 594 - 597 NKY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Flux Group at Tj=25˚C Luminous Flux (lm) Brightness Group R2 39.8...45.0 R3 45.2...51.7 S2 51.7...59.0 S3 59.0...67.2 Luminous flux is measured with an accuracy of ± 11%. 3 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Forward Voltage Vs Forward Current Relative Intensity, Normalized at 400mA Relative Intensity Vs Forward Current 3 2 1.8 2.5 Forward Voltage, V 1.6 1.4 1.2 1 0.8 0.6 0.4 1.5 1 0.5 0.2 0 0 0 200 400 600 800 1000 0 200 400 600 800 1000 Forward Current, mA Forward Current, mA Relative Intensity Vs Wavelength Maximum Current Vs Solder Point Temperature 1200 1 Amber 0.9 Forward Current; mA 0.8 Relative Intensity 2 Red 0.7 Yellow 0.6 0.5 0.4 0.3 0.2 0.1 1000 800 600 400 200 0 0 500 600 700 800 0 50 100 150 Solder Point Temperature Wavelength; nm Radiation Pattern 30 o 20 o 10 o 0o 1.0 40 o 50 o 60 o 70 o 0.8 0.6 0.4 0.2 80 o 90 o 0 4 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination KNova • AlInGaP : NKx-NGG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn Plating 5 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Solder Pad Design 6 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 1000 units. • Reel diameter isOpto 330 mm.Technologies DOMINANT DRND-00 Proposed new part 4. Reason for change: A recess is now included in the design to ensure that the soldering terminals are freely suspended in the tape and is better protected from risk of deformation. 5. Target conversion date: Samples with the new carrier tape will be available upon request. New carrier tape will be used for manufacturing for lots loaded beginning of Feb. 1st 2011. 7 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Packaging Specification 8 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc KNova 1 completed bag (1000pcs) 0.301 0.034 725 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For KNova TM Cardboard Box Size Large Dimensions (mm) 416 x 516 x 476 Empty Box Weight (kg) Reel / Box 1.74 20 reels MAX 9 Quantity / Box (pcs) 20,000 MAX 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Temperature (˚C) 200 Ramp-up 3˚C/sec max. 183˚C 175 60-150s 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 10 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 29 Jan 2010 2, 3 - Add new partno: NKY-NGG-RS2-1 08 Feb 2010 - Add Characteristics - Update company name 05 Apr 2010 7 Update Taping and Orientation 24 May 2011 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 11 24/05//2011 V5.0 DOMINANT TM AlInGaP : NKx-NGG Opto Technologies Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shanghai Representative Office Rm 1007, DaZhong Building, No. 1515 Zhong Shan (W) Rd, Shanghai, China 200235 Tel: +86 21 6428 6428 Fax: +86 21 6428 6880 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. RM 211 SUNTEAK CITY APT. 513-15 Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-725, Korea Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM