EURO QUARTZ XO32 Series Oscillators 312kHz to 160MHz 3.2 x 2.5 x 1.0mm SMD HCMOS Page 1 of 2 FEATURES Ultra-miniature 3.2 x 2.5 x 1.0mm package Frequency Range 312kHz to 160MHz Tristate (Enable/Disable) function as standard Supply voltage 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 or 5.0 Volts DESCRIPTION OUTLINE & DIMENSIONS XO32 ultra-miniature oscillators consist of a TTL/CMOS-compatible hybrid circuit and a miniature quartz crystal packaged in a low-profile, industry-standard ceramic package. The package provides a fully specified clock oscillator with a very small footprint. SPECIFICATION Frequency Range: Supply Voltage: Output Logic: Frequency Stability 0° to +50°C: -20° to +70°C: -40 to +85°C: -55° to +105°C: Rise/Fall Time: Output Voltage: HIGH ‘1’: LOW ‘0’: Output Load Duty Cycle: Supply Current: Operating Temperature Commercial: Industrial: Storage Temperature: Start-up Time: Ageing: Phase Jitter RMS: Tristate Function (Pad 1): Packaging: 312kHz to 160.0MHz 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 Volts±5% or 5.0 Volts ±10% HCMOS/LSTTL from from from from ±10ppm ±15ppm ±25ppm ±100ppm 90%Vdd minimum 10%Vdd maximum 15pF 50%±5% typical -10° to +70°C -40° to +85°C -55 to +105°C 10ms max. ±5ppm max. in first year at 25°C 10ps typical Enable/Disable function is standard for XO32. Output (Pad 3) is active if Pad 1 is not connected or Pad 1 is 'HIGH'. Output is high impedance when 'LOW' or GROUND is applied to Pad 1. 8mm tape, 178mm reel, 1k pieces SOLDER TEMPERATURE PROFILE EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk EURO QUARTZ XO32 Series Oscillators 312kHz to 160MHz 3.2 x 2.5 x 1.0mm SMD HCMOS Page 2 of 2 SUPPLY VOLTAGE-DEPENDENT PARAMETERS Supply Voltage Frequency Range Logic HIGH '1' (90%Vdd min.) Logic LOW '0' (90% Vdd max.) Current Consumption Rise Time/ Fall Time +1.0VDC±5% Code = 'F' 312kHz~ 60MHz +1.2VDC±5% Code = 'E' 312kHz~ 60MHz +1.5VDC±5% Code = 'D' 312kHz~ 60MHz +1.8VDC±5% Code = 'C' 156kHz~ 160MHz +2.5VDC±5% Code = 'B' 156kHz~ 160MHz +3.3VDC±5% Code = 'A' 156kHz~ 160MHz +5.0VDC±10% Code = '_' 156kHz~ 160MHz 0.90V min. 1.08V min. 1.35V.min 1.62V min. 2.25V min. 2.97V min. 4.5V min. 0.10V max 0.12V max 0.15V max. 0.18V max. 0.25V max. 0.33V max. 0.5V max. [0.3~1.5MHz] 4mA max. [1.5~20MHz] 4mA max [20.1~50MHz] 4mA max. [50.1~60MHz] 12mA max. 6ns max. [0.3~1.5MHz] [0.3~1.5MHz] [1.0~1.5MHz] [0.3~1.5MHz] [0.5~1.5MHz] 4mA max. 4mA max. 5mA max. 5mA max. 5mA max. [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] 4mA max. 4mA max. 8mA max. 8mA max. 8mA max. [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] 4mA max. 4mA max. 15mA max. 15mA max. 15mA max. [50.1~60MHz] [50.1~60MHz] [50.1~160MHz] [50.1~160MHz] [50.1~75MHz] 12mA max. 12mA max. 22mA max. 25mA max. 35mA max. 6ns max. 6ns max. 7ns max. 7ns max. 10ns max. Measured between 10% ~ 90% of wave form (CL = 15pF) ENVIRONMENTAL PERFORMANCE SPECIFICATION RoHS Status: Storage Temperature Range: Humidity: Hermetic Seal: Solderability: Reflow: Vibration: Shock: Compliant -55° to +105°C 85% RH, 85°C for 48 hours Leak rate 2x10-8 ATM -cm3/s max. MIL-STD-202F Method 208E 248°C max. (see diagram) MIL-STD-202F Method 204, 35±5 mins, 50 to 2000Hz MIL-STD-202F Method 213B, test Condition E, 50g 11ms. [0.5~1.5MHz] 5mA max. [1.5~20MHz] 8mA max. [20.1~50MHz] 15mA max. [50.1~75MHz] 35mA max. 10ns max. PART NUMBERING Example: 20.000MHz XO32050UCTA Frequency Series Designation XO32 Stability* 100 = ±100ppm 050 = ±50ppm 025 = ±25ppm Output CMOS/LSTTL Operating Temp. Range C = Commercial (-10°~70°C) I = Industrial (-40°~+85°C) M = Military (±100ppm -55°~+105°C) Tristate Function Supply Voltage Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts D = 1.5 Volts E = 1.2 Volts F = 1.0 Volts EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk