EURO QUARTZ XO22 Series Oscillators 2.5 x 2.0 x 0.95mm SMD HCMOS 156kHz to 130MHz FEATURES Page 1 of 2 Ultra-miniature 2.5 x 2.0 x 0.9mm package Frequency Range 156kHz to 130MHz Tristate (Enable/Disable) function as standard Supply voltage 1.0, 1.2, 1.5, 1.8, 2.5, 3.3 or 5.0Volts DESCRIPTION XO22 ultra-miniature oscillators consist of a TTL/CMOS-compatible hybrid circuit and a miniature quartz crystal packaged in a low-profile, industry-standard ceramic package. XO22 components are fully specified clock oscillators with low mass and a very small footprint. SPECIFICATION OUTLINE & DIMENSIONS Frequency Range: Supply Voltage: 156kHz to 130.0MHz 1.0, 1.2, 1.5, 1.8, 2.5, 3.3Volts ±5%, or 5.0V±10% HCMOS/LSTTL Output Logic: Frequency Stability: Rise/Fall Time: Output Load 15pF ( Duty Cycle: Supply Current: Operating Temperature Commercial: Industrial: Storage Temperature: Start-up Time: Ageing: Tristate Function (Pad 1): Packaging: ) 50%±5% typical -10° to +70°C -40° to +85°C -55 to +100°C 10ms max. ±5ppm max. in first year at 25°C Enable/Disable function is standard for XO22. Output (Pad 3) is active if Pad 1 not connected or Pad 1 is 'HIGH'. Output high impedance when 'LOW' or GROUND is applied to Pad 1. 8mm tape, 180mm reel, 1k or 2k pieces per reel SUPPLY VOLTAGE-DEPENDENT PARAMETERS Supply Voltage Frequency Range Logic HIGH '1' (90%Vdd min.) Logic LOW '0' (90% Vdd max.) Current Consumption Rise Time/ Fall Time +1.0VDC±5% Code = 'F' 312kHz~ 60MHz +1.2VDC±5% Code = 'E' 312kHz~ 60MHz +1.5VDC±5% Code = 'D' 312kHz~ 60MHz +1.8VDC±5% Code = 'C' 156kHz~ 160MHz +2.5VDC±5% Code = 'B' 156kHz~ 160MHz +3.3VDC±5% Code = 'A' 156kHz~ 160MHz +3.3VDC±10% Code = '_' 156kHz~ 160MHz 0.90V min. 1.08V min. 1.35V.min 1.62V min. 2.25V min. 2.97V min. 4.5V min. 0.10V max 0.12V max 0.15V max. 0.18V max. 0.25V max. 0.33V max. 0.5V max. [0.3~1.5MHz] 4mA max. [1.5~20MHz] 4mA max [20.1~50MHz] 4mA max. [50.1~60MHz] 12mA max. 6ns max. [0.3~1.5MHz] [0.3~1.5MHz] [1.0~1.5MHz] [0.3~1.5MHz] [0.5~1.5MHz] 4mA max. 4mA max. 5mA max. 5mA max. 5mA max. [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] [1.5~20MHz] 4mA max. 4mA max. 8mA max. 8mA max. 8mA max. [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] [20.1~50MHz] 4mA max. 4mA max. 15mA max. 15mA max. 15mA max. [50.1~60MHz] [50.1~60MHz] [50.1~160MHz] [50.1~160MHz] [50.1~75MHz] 12mA max. 12mA max. 22mA max. 25mA max. 35mA max. 6ns max. 6ns max. 7ns max. 7ns max. 10ns max. Measured between 10% ~ 90% of wave form (CL = 15pF) [0.5~1.5MHz] 5mA max. [1.5~20MHz] 8mA max. [20.1~50MHz] 15mA max. [50.1~75MHz] 35mA max. 10ns max. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk EURO QUARTZ XO22 Series Oscillators 2.5 x 2.0 x 0.95mm SMD HCMOS 156kHz to 130MHz Page 2 of 2 SOLDER TEMPERATURE PROFILE PART NUMBERING Example: 20.000MHz XO22050UCTA Frequency Series Designation XO22 Temperature Stability* 100 = ±100ppm 050 = ±50ppm 025 = ±25ppm Output CMOS/LSTTL Operating Temp. Range C = Commercial I = Industrial Tristate Function Supply Voltage Blank = 5.0 Volts A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts D = 1.5 Volts E = 1.2 Volts F = 1.0 Volts ENVIRONMENTAL PERFORMANCE SPECIFICATION RoHS Status: Storage Temperature Range: Humidity: Hermetic Seal: Solderability: Reflow: Vibration: Shock: Compliant -55° to +105°C 85% RH, 85°C for 48 hours Leak rate 2x10-8 ATM -cm3/s max. MIL-STD-202F Method 208E 260°C for 10 sec (see diagram) MIL-STD-202F Method 204, 35±5 mins, 50 to 2000Hz MIL-STD-202F Method 213B, test Condition E, 50g 11ms. EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk