EURO QUARTZ XO95 Series Oscillators High Reliability SMD Oscillator 200kHz to 220MHz FEATURES Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques CMOS and TTL compatible Low power consumption Optional Output Enable/Disable with Tri-State Low EMI emission High shock resistance Full military testing available Hermetically sealed ceramic package OUTLINE & DIMENSIONS DESCRIPTION XO95 oscillators consist of a TTL/CMOS-compatible hybrid circuit with a miniature quartz crystal packaged in a low-profile, ceramic package. Utilizing the latest advancements in production technology, the combination of optimized design and high quality materials provide a highly reliable clock oscillator suitable for defence and aerospace applications. APPLICATIONS Military & Aerospace Smart munitions Cockpit Systems Navigation Engine control systems Industrial, Computer & Communications Industrial controls Instrumentation Microprocessor clocks Medical COMPARISON OF ENABLE/DISABLE OPTIONS Infusion pumps There are three Enable/Disable options available, E, T and N. Both the E and T versions have Tri-state outputs. In the E version the oscillator stops, in the T version the oscillator continues to run. The N version (no tristate function) does not have pin 1 connected internally. ABSOLUTE MAXIMUM RATINGS Supply Voltage Vdd: Storage Temperature Range: Maximum Process Temperature: -0.5V to 7.0V -55° to +125°C 260° for 20 seconds E T Enable (Pin 1 High) Output: Frequency Output Oscillator: Oscillates Current: Normal Frequency Output Oscillates Normal Disable (Pin 1 Low) PACKAGING OPTIONS XO95 oscillators are supplied tray packed for quantities <250 pieces. Quantities above 250 pieces are supplied tape and reeled; 16mm tape on 178mm or 330mm reels per EIA 418. Output: Oscillator: Current: High Z state Stops Very low High Z state Oscillates Lower than normal EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk EURO QUARTZ XO95 Series Oscillators High Reliability SMD Oscillator SPECIFICATION 200kHz to 220MHz SUPPLY CURRENT Frequency Frequency Range: Supply Voltage1: Calibration Tolerance2: Frequency Stability over Temperature3 Commercial (-10 to +70°C): Industrial (-40 to +85°C): Military (-55 to +125°C): Output Load (CMOS)4: Supply Current: Start-up Time: Rise/Fall Time: Duty Cycle: Ageing, first year: Shock, survival5: Vibration, survival6: Operating Temp Ranges 200.0kHz to 220.0MHz 0.9 Volts to 5.0 Volts ±10% ± 30 ppm Supply Current Supply Current Vdd = 5.0V Vdd = 3.3V 10MHz 24MHz 30MHz 40MHz 50MHz 2mA 4mA 6mA 8mA 10mA 4mA 8mA 10mA 12mA 14mA ±15 to ±50 ppm ±30 to ±100 ppm ±40 to ±100ppm 15 pF 5 ms maximum 6 ns maximum 40/60% minimum ±10 ppm maximum 3000g, 0.3 ms, ½ sine 20g, 10 ~ 2,000Hz swept sine -10°C to +70°C (Commercial) -40°C to +85°C (Industrial) -55°C to +125°C (Military) HOW TO ORDER XO95 SMD OSCILLATORS Example: XO954ST-SM3-32.0M/100/100/-I XO95 4 Supply Voltage 1 = 1.8V 2 = 2.5V 3 = 3.0V 4 = 3.3V 5 = 5.0V S T 'S' if special or custom parameters required Enable/Disable option, E, T or N SM3 Terminations Blank = SM1 =Gold plated SM3 = Solder dipped SM5 = Solder dipped (SM1 and SM5 are pB free) 32.0M, 100 / 100 Frequency K = kHz M = MHz Calibration Tolerance at 25°C (in ±ppm) / – / Frequency Stability over Temp. Range (in ppm) I Temp. Range C = -10° ~ +70°C I = -40° ~ +85°C M = -55° ~ +125°C S = Customer specified OR - / - / 200 Total (overall) frequency tolerance in ±ppm / I Temp. Range C = -10° ~ +70°C I = -40° ~ +85°C M = -55° ~ +125°C S = Customer specified EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk