DATA SHEET UPG2301TQ D NEC's POWER AMPLIFIER FOR BLUETOOTH™ CLASS 1 DESCRIPTION • OPERATION FREQUENCY fopt = 2,400 to 2,500 MHz (2 450 MHz TYP.) NEC's μPG2301TQ is a GaAs HBT MMIC for power amplifier for Bluetooth Class 1. • SUPPLY VOLTAGE VCC1, 2 = Vbias = 2.7 to 3.6 V (3.3 V TYP.) output power by using InGaP HBT. This device is housed in UE FEATURES This device realizes high efficiency, high gain and high • CONTROL VOLTAGE Vcont = 0 to 3.6 V (2.5 V TYP.) Venable = 0 to 3.1 V (2.9 V TYP.) a low profile 10-pin plastic TSON package. • MAXIMUM POWER Pout(MAX.) = +23 dBm TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm APPLICATION • POWER AMPLIFIER FOR BLUETOOTH CLASS 1 • WIRELESS LAN NT • GAIN CONTROL RANGE GCR = 23 dB TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm IN • CIRCUIT CURRENT ICC = 120 mA TYP.@ VCC1, 2 = Vbias = 3.3 V, Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm • POWER GAIN GP = 23 dB TYP.(Reference value) • HIGH EFFICIENCY PAE = 50% TYP.(Reference value) • SHUT DOWN FUNCTION SC O • HIGH-DENSITY SURFACE MOUNTING 10 pin plastic TSON package (2.4 × 2.55 × 0.6 mm) ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Circuit Current Shut Down Current SYMBOL ICC Ishut down Pout1 Output Power 2 Pout2 Gain Control Range GCR DI Output Power 1 TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 0 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 0 to 2.5 V, Venable = 2.9 V, Pin = +4 dBm MIN. TYP. MAX. UNIT 110 120 130 mA − 0.1 1.0 μA +21 +23 +24.5 dBm − 0 +1 dBm 20 23 − dB MIN. TYP. MAX. UNIT − 50 − % − 23 − dB ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = +25°C, VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz, External input and output matching) PARAMETER Efficiency Power Gain SYMBOL PAE GP TEST CONDITIONS Vcont = 2.5 V, Venable = 2.9 V, Pin = +4 dBm Vcont = 2.5 V, Venable = 2.9 V, Pin = −5 dBm California Eastern Laboratories UPG2301TQ ABSOLUTE MAXIMUM RATINGS VCC1,2 Supply Voltage Vbias Vcont Control Voltage Venable Circuit Current ICC Icont Control Current (TA = +25°C) RATINGS Ienable UNIT PARAMETER SYMBOL fopt 5.0 V Operating Frequency 3.6 V Supply Voltage 400 mA 0.5 mA mW Power Dissipation PD 700 Note Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +150 °C Input Power Pin +10 dBm Control Voltage VCC1,2 Vbias TYP. MAX. UNIT 2,400 2,450 MIN. 2,500 MHz 3.6 V 2.7 3.3 D SYMBOL Vcont 0 2.5 3.6 Venable 0 2.9 3.1 UE PARAMETER RECOMMENDED OPERATING RANGE Note Mounted on double copper-clad 50 × 50 × 1.6 mm IN epoxy glass PWB, TA = +85°C PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM 9 8 7 Top View 6 10 9 8 7 Bottom View 6 6 7 8 9 10 NT Top View 10 Bias Circuit 2301 Bias Circuit 2 3 4 5 1 2 3 4 5 DI SC O 1 5 4 3 2 1 PIN NO. 1 OUTPUT/ VCC2 PIN NAME 2 Venable 3 Vbias 4 GND 5 VCC1 6 INPUT 7 Vcont 8 N.C. 9 GND 10 GND V UPG2301TQ ELEVALUATION CIRCUIT (VCC1, 2 = Vbias = 3.3 V, f = 2,450 MHz) 1 pF 9 8 7 6 1.8 nH UE 10 D Vcont INPUT Bias Circuit 1,000 pF 1 OUTPUT 15 nH 2 3 4 5 NT 1 pF IN Bias Circuit 1,000 pF VCC1 1,000 pF Vbias 1,000 pF VCC2 Venable DI SC O The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. UPG2301TQ ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD µ PG2301TQ HBT PA EC-Ver.2 10pin TSON Ven Vc1 Vc2 C2 C3 C1 IN C6 L2 C5 L1 C4 SC O NT IN Vct UE D Vds COMPONENT LIST SYMBOL C1, C3, C4, C5 C2, C6 L1 PART NUMBER MANUFACTURER GRM39CH102J50 muRata 1 pF GRM39CH010C50 muRata 15 nH TFL0816-15N Susumu 1.8 nH TFL0816-1N8 Susumu DI L2 RATING 1,000 pF OUT UPG2301TQ TYPICAL CHARACTERLISTICS Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Pin = +4 dBm, External input and output matching 120 ICC UE 100 Circuit Current ICC (mA) 10 5 0 -5 0 140 PAE 45 40 35 30 25 20 15 D 160 55 50 80 Pout 60 40 20 0.5 1.0 1.5 2.0 2.5 0 3.0 IN Output Power Pout (dBm), Efficiency PAE (%) OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. CONTROL VOLTAGE Control Voltage Vcont (V) Condition : f = 2,450 MHz, VCC1 = VCC2 = Vbias = 3.3 V, Venable = 2.9 V, Vcont = 2.5 V, External input and output matching PAE 140 45 40 ICC 35 30 25 15 -5 Remark The graphs indicate nominal characteristics. 80 20 5 -10 100 40 10 0 -15 120 60 Pout 20 0 +5 Input Power Pin (dBm) DI 160 +10 0 +15 Circuit Current ICC (mA) 55 50 SC O Output Power Pout (dBm), Efficiency PAE (%) NT OUTPUT POWER, EFFICIENCY, CIRCUIT CURRENT vs. INPUT POWER UPG2301TQ PACKAGE DIMENSIONS 10-PIN PLASTIC TSON (UNIT: mm) 0.18±0.05 (Bottom View) (1.70) IN 2.20±0.1 (0.95) UE (0.3) (1.95) 2.25±0.1 2.55±0.15 D 0.40±0.05 SC O Note () : Reference value NT (0.6 MAX.) (0.125) 2.40±0.15 (0.35) ORDERING INFORMATION PART NUMBER μPG2301TQ-E1-A PACKAGE 10-pin plastic TSON MARKING SUPPLYING FORM 2301 • Embossed tape 8 mm wide • Pin 5, 6 face the perforation side of the tape • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. DI Part number for sample order: μPG2301TQ Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 02/04/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. D 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 UE Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. IN CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Lead (Pb) Mercury Concentration Limit per RoHS (values are not yet fixed) NT Restricted Substance per RoHS < 1000 PPM Concentration contained in CEL devices -A Not Detected < 1000 PPM Not Detected < 100 PPM Not Detected < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected Cadmium SC O Hexavalent Chromium -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. DI Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.