A Business Partner of Renesas Electronics Corporation. Preliminary PS2561F-1,PS2561FL-1 DIP PHOTOCOUPLER, OPERATING AMBIENT TEMPERATURE 110°C <R> Data Sheet R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 DESCRIPTION The PS2561F-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2561F-1 is in a plastic DIP (Dual In-line Package) and the PS2561FL-1 is lead bending type (Gull-wing) for surface mount. FEATURES <R> <R> • • • • • • • • Operating ambient temperature: 110°C High Isolation voltage (BV = 5 000 Vr.m.s.) High collector to emitter voltage (VCEO = 80 V) High current transfer ratio (CTR = 450% TYP.) High-speed switching (tr = 5 μs TYP., tf = 7 μs TYP.) Embossed tape product: PS2561FL-1-F3 : 2 000 pcs/reel Pb-Free product Safety standard • UL approved: No. E72422 PIN CONNECTION (Top View) 4 3 1 2 1. Anode 2. Cathode 3. Emitter 4. Collector APPLICATIONS <R> • • • • Power meter Telephone/FAX. FA/OA equipment Programmable logic controller The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 1 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 <R> Chapter Title PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS2561F-1 4.6±0.35 6.5±0.5 4 3 7.62 3.5±0.3 3.2±0.4 4.15±0.4 1 2 0 to 15° +0.1 0.25 –0.05 1.25±0.15 2.54 0.50±0.10 0.25 M Lead Bending Type PS2561FL-1 4.6±0.35 3 1 2 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 <R> 0.1 +0.1 –0.05 3.5±0.3 0.25 +0.1 –0.05 6.5±0.5 4 0.15 PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Inner Creepage Distance (MIN.) Isolation Distance (MIN.) R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 PS2561F-1, PS2561FL-1 7 mm 7 mm 4 mm 0.4 mm Page 2 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 <R> Chapter Title MARKING EXAMPLE No. 1 pin Mark R 2561F KR131 K R Company Initial Type Number Assembly Lot 1 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Pb-Free and Halogen Free <R> Made in Japan Made in Taiwan New PKG R Y ORDERING INFORMATION Part Number Order Number PS2561F-1 PS2561FL-1 PS2561FL-1-F3 PS2561F-1Y-A PS2561FL-1Y-A PS2561FL-1Y-F3-A Note: Solder Plating Specification Pb-Free and Halogen Free Packing Style Magazine case 100 pcs Embossed Tape 2 000 pcs/reel Safety Standard Approval Standard products (UL approved) Application *1 Part Number PS2561F-1 PS2561FL-1 *1. For the application of the Safety Standard, following part number should be used. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 3 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 Chapter Title ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current*1 Transistor Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 Operating Ambient Temperature Storage Temperature Diode <R> Symbol VR IF ΔPD/°C PD IFP VCEO VECO IC ΔPC/°C PC BV TA Tstg Ratings 6 30 1.5 150 1 80 7 50 1.5 150 5 000 −55 to +110 −55 to +150 Unit V mA mW/°C mW A V V mA mW/°C mW Vr.m.s. °C °C Notes: *1. PW = 100 μs, Duty Cycle = 1% *2. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 4 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 <R> Chapter Title ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Forward Voltage Reverse Current Terminal Capacitance Diode Symbol VF IR Ct Conditions IF = 10 mA VR = 5 V V = 0 V, f = 1.0 MHz IF = 0 mA, VCE = 80 V MIN. 300 60 1011 Transistor Collector to Emitter Dark Current ICEO Coupled Current Transfer Ratio *1 (IC/IF) CTR Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time*2 Fall Time*2 VCE (sat) IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V IF = 10 mA, IC = 2 mA RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100 Ω Notes: *1. CTR rank CTR Rank K CTR (%) TYP. 1.2 MAX. 1.4 5 100 Unit V μA pF nA 600 % 0.3 V 10 450 0.5 5 7 18 18 Ω pF μs Conditions 300 to 600 IF = 5 mA, VCE = 5 V 60 and larger IF = 1 mA, VCE = 5 V *2. Test circuit for switching time Pulse Input VCC Input PW = 100 μ s Duty Cycle = 1/10 IF 50 Ω ton td VOUT RL = 100 Ω ts toff 90% Output tr R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 tf 10% Page 5 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 100 1.5 mW/°C 50 0 25 50 75 100110 125 10 100 1.5 mW/°C 50 25 50 100110 125 75 Ambient Temperature TA (°C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 25 IF = 5 mA TA = +100°C +60°C +25°C 5 0°C –25°C –55°C 1 0.5 20 4 mA 15 3 mA 10 2 mA 5 1 mA 0.1 0.7 150 Ambient Temperature TA (°C) Collector Current IC (mA) Forward Current IF (mA) 50 150 0 150 100 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 100 000 10 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) <R> Chapter Title VCE = 80 V 48 V 24 V 10 V 5V 1 000 100 10 1 −50 −25 0 25 50 75 100 Ambient Temperature TA (°C) 5 mA IF = 10 mA 10 2 mA 1 0.1 0 0.2 0.4 0.6 1 mA 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 6 of 13 A Business Partner of Renesas Electronics Corporation. PS2561F-1,PS2561FL-1 Chapter Title 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25°C, IF = 5 mA, VCE = 5 V 0.2 0 −50 CTR = 430% CTR = 480% −25 0 25 50 75 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 600 1.4 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Sample A 500 B 400 300 200 100 0 0.01 100 Ambient Temperature TA (°C) Switching Time t ( μ s) Switching Time t ( μ s) tf tr 10 td ts 1 0.1 10 100 1 000 10 000 Load Resistance RL (Ω) Normalized Gain GV (dB) 5 10 100 SWITCHING TIME vs. LOAD RESISTANCE 1 000 IC = 2 mA, VCC = 10 V, CTR = 430% 1 Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 0.1 IF = 5 mA, VCC = 5 V, CTR = 430% tf 100 ts 10 tr 1 0.1 0.1 td 1 10 100 Load Resistance RL (kΩ) FREQUENCY RESPONSE 0 −5 −10 −15 −20 IF = 5 mA, VCC = 5 V, RL = 100 Ω, CTR = 430% −25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 7 of 13 PS2561F-1,PS2561FL-1 Chapter Title FALL TIME vs. AMBIENT TEMPERATURE *1 RISE TIME vs. AMBIENT TEMPERATURE *1 1 000 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 100 1 kΩ RL = 510 Ω 10 Fall Time tf ( μ s) Rise Time tr ( μ s) 1 000 1 10 kΩ 1 kΩ 100 10 RL = 510 Ω 1 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 10 kΩ 0.1 −50 −25 0 25 50 75 0.1 −50 100 −25 Storage Time ts ( μ s) Delay Time td ( μ s) RL = 510 Ω, 1 kΩ, 10 kΩ −25 0 25 50 100 10 kΩ 1 0.1 −50 75 1 000 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 10 50 STORAGE TIME vs. AMBIENT TEMPERATURE *1 DELAY TIME vs. AMBIENT TEMPERATURE *1 100 25 Ambient Temperature TA (°C) Ambient Temperature TA (°C) 1 000 0 75 100 10 1 kΩ RL = 510 Ω 1 PS2561F-1 (CTR = 410%) PS2501-1 (CTR = 380%) 0.1 −50 100 −25 0 25 50 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) *1 Test circuit for switching time above Pulse Input Vin (high) = 5 V VCC = 5 V VCC PW = 100 μ s Duty cycle = 1/10 In monitor Input IF 510 Ω RL ton td VOUT ts toff 90% Output tr tf 10% Remark The graphs indicate nominal characteristics. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 8 of 13 PS2561F-1,PS2561FL-1 TAPING SPECIFICATIONS (UNIT: mm) 1.55±0.1 4.5 MAX. 10.3±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 7.5±0.1 4.0±0.1 5.3±0.1 8.0±0.1 0.4 Tape Direction PS2561FL-1-F3 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ 13.0±0.2 φ 330±2.0 <R> Chapter Title 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 15.9 to 19.4 Outer edge of flange Page 9 of 13 PS2561F-1,PS2561FL-1 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) C D B <R> Chapter Title A Part Number PS2561FL Lead Bending lead bending type (Gull-wing) for surface mount R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 A B C D 9.2 2.54 1.7 2.2 Page 10 of 13 PS2561F-1,PS2561FL-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Th ree Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (°C) <R> Chapter Title (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 11 of 13 PS2561F-1,PS2561FL-1 Chapter Title 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 12 of 13 PS2561F-1,PS2561FL-1 Caution GaAs Products Chapter Title This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. R08DS0033EJ0100 Rev.1.00 Jan 06, 2012 Page 13 of 13 Revision History PS2561F-1,PS2561FL-1 Data Sheet Rev. Date Page 0.01 1.00 Dec 22, 2010 Jan 06, 2012 − Throughout Throughout Throughout p.1 p.3 p.3 p.4 p.5 pp.6 to 8 p.9 p.10 p.11 Description Summary First edition issued Preliminary Data Sheet -> Data Sheet Safety standards approved Deletion of the descriptions for PS2561FL1-1,PS2561FL2-1 Modification of APPLICATIONS Modification of MARKING EXAMPLE Addition of ORDERING INFORMATION Modification of ABSOLUTE MAXIMUM RATINGS IC Modification of ELECTRICAL CHARACTERISTICS tr, tf Addition of TYPICAL CHARACTERISTICS Addition of TAPING SPECIFICATIONS Modification of RECOMMENDED MOUNT PAD DIMENSIONS Modification of NOTES ON HANDLING All trademarks and registered trademarks are the property of their respective owners. C-1