PS7801E-1A

Solid State Relay
OCMOS FET
PS7801E-1A
4-PIN ULTRA SMALL FLAT-LEAD,
LOW C × R, 1-ch Optical Coupled MOS FET
−NEPOC Series−
DESCRIPTION
The PS7801E-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side
(input side) and MOS FETs on the output side.
An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 50%
compared with the PS72xx series.
It is suitable for high-frequency signal control, due to its low C × R, low output capacitance, and low off-state
leakage current.
FEATURES
PIN CONNECTION
• Ultra small flat-lead package (4.2 (L) × 2.5 (W) × 1.85 (H) mm)
• Low C × R (C × R = 9 pF • Ω)
(Top View)
4
3
• Low output capacitance (Cout = 5 pF TYP.)
• 1 channel type (1 a output)
1. LED Anode
2. LED Cathode
3. MOS FET
4. MOS FET
• Designed for AC/DC switching line changer
• Low offset voltage
<R>
• Ordering number of taping product: PS7801E-1A-F3 (3 500 pcs/reel)
<R>
• Pb-Free product
<R>
• Safety standards
1
2
• UL approved: File No. E72422
APPLICATIONS
• Measurement equipment
Document No. PN10569EJ02V0DS (2nd edition)
Date Published January 2008 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2005, 2008
PS7801E-1A
PACKAGE DIMENSIONS (UNIT: mm)
2.5±0.3
0.2 MAX.
3.6 +0.3
–0.4
0.2±0.1
N
4.2±0.2
3
4
1
2
3.0 MAX.
0.4±0.1
0.2±0.1
1.27
<R>
MARKING EXAMPLE
1E
N
701
No.1 pin
mark
(Nicked
corner)
Last number of
type No. : 1E *1
*2
An initial of "NEC"
Assembly lot
7 01 (Marking details)
Week assembled
Year assembled
*1 The marking corresponds to the last two digits
of the part number below.
PS7801E-1A
*2 Bar : Pb-Free
2
0.36
0.15 +0.1
–0.05
1.85±0.05
4.6±0.2
Data Sheet PN10569EJ02V0DS
PS7801E-1A
<R>
ORDERING INFORMATION
Part Number
PS7801E-1A
PS7801E-1A-A
PS7801E-1A-F3
PS7801E-1A-F3-A
Safety Standard
Approval
Application
50 pcs (Tape 50 pcs cut)
Standard products
PS7801E-1A
Embossed Tape 3 500 pcs/reel
(UL approved)
Solder Plating
Specification
Order Number
Packing Style
Pb-Free
Part
*1
Number
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Ratings
Unit
Forward Current (DC)
IF
50
mA
Reverse Voltage
VR
5.0
V
PD
50
mW
IFP
1
A
Break Down Voltage
VL
40
V
Continuous Load Current
IL
150
mA
ILP
300
mA
PD
250
mW
BV
500
Vr.m.s.
Total Power Dissipation
PT
300
mW
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature
Tstg
−40 to +100
°C
Diode
Power Dissipation
Peak Forward Current
MOS FET
Pulse Load Current
*1
*2
(AC/DC Connection)
Power Dissipation
Isolation Voltage
*3
*1 PW = 100 µs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
LED Operating Current
IF
2
5
20
mA
LED Off Voltage
VF
0
0.5
V
Data Sheet PN10569EJ02V0DS
3
PS7801E-1A
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
MOS FET
Symbol
Conditions
Forward Voltage
VF
IF = 5 mA
Reverse Current
IR
VR = 5 V
Off-state Leakage
ILoff
VD = 40 V
Output Capacitance
Cout
VD = 0 V, f = 1 MHz
LED On-state Current
IFon
IL = 150 mA
On-state Resistance
MIN.
TYP.
MAX.
Unit
1.1
1.4
V
5.0
µA
0.05
1.0
nA
5
7
pF
2.0
mA
Current
Coupled
Ron
IF = 5 mA, IL = 150 mA
1.8
2.5
Ω
Turn-on Time
*1, 2
ton
IF = 5 mA, VO = 5 V, RL = 500 Ω,
0.15
1.0
ms
Turn-off Time
*1, 2
toff
PW ≥ 10 ms
0.05
0.5
Isolation Resistance
RI-O
VI-O = 0.5 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz
10
Ω
9
0.3
pF
*1 Test Circuit for Switching Time
IF
Pulse Input
VL
50%
Input
0
VO = 5 V
Input monitor
90%
VO monitor
Output
Rin
RL
10%
ton
toff
*2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
4
Data Sheet PN10569EJ02V0DS
PS7801E-1A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
200
Maximum Load Current IL (mA)
Maximum Forward Current IF (mA)
100
80
60
40
20
0
–25
0
25
50
75
85
120
80
40
25
50
75
85
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
100
10
1.4
IF = 50 mA
30 mA
20 mA
10 mA
1.2
5 mA
1 mA
1.0
0.8
–25
0
25
50
6
4
2
0
100
75
f = 1 MHz
8
10
30
20
40
50
Ambient Temperature TA (˚C)
Applied Voltage VD (V)
OFF-STATE LEAKAGE CURRENT vs.
AMBIENT TEMPERATURE
LOAD CURRENT vs. LOAD VOLTAGE
10–7
200
VD = 40 V
10–9
–10
10
10–11
100
50
–0.4 –0.3 –0.2 –0.1
10–12
10–13
0
IF = 5 mA
150
–8
Load Current IL (mA)
10
0
Ambient Temperature TA (˚C)
Output Capacitance Cout (pF)
Forward Voltage VF (V)
160
0
–25
100
1.6
Off-state Leakage Current ILoff (A)
<R>
0
0.1
–50
0.2
0.3
0.4
–100
–150
20
40
60
80
100
Ambient Temperature TA (˚C)
–200
Load Voltage VL (V)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10569EJ02V0DS
5
PS7801E-1A
NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
ON-STATE RESISTANCE DISTRIBUTION
50
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA,
IL = 150 mA
1.6
1.2
0.8
0.4
30
20
10
0
–25
0
25
50
0
100
75
1.2
1.8
2
2.2
TURN-ON TIME vs. FORWARD CURRENT
TURN-OFF TIME vs. FORWARD CURRENT
1.4
0.5
VO = 5 V,
RL = 500 Ω
VO = 5 V,
RL = 500 Ω
Turn-off Time toff (ms)
1.0
0.8
0.6
0.4
0.4
0.3
0.2
0.1
5
0
10
15
20
5
0
25
Forward Current IF (mA)
15
20
25
TURN-OFF TIME DISTRIBUTION
TURN-ON TIME DISTRIBUTION
50
30
20
n = 50 pcs,
IF = 5 mA,
VO = 5 V,
RL = 500 Ω
40
Number (pcs)
n = 50 pcs,
IF = 5 mA,
VO = 5 V,
RL = 500 Ω
40
30
20
10
10
0
10
Forward Current IF (mA)
50
Number (pcs)
1.6
On-state Resistance Ron (Ω)
0.2
0.05
0.1
0.15
0.2
0.25
0.3
0
0.02
0.04
0.06
0.08
0.1
Turn-off Time toff (ms)
Turn-on Time ton (ms)
Remark The graphs indicate nominal characteristics.
6
1.4
Ambient Temperature TA (˚C)
1.2
Turn-on Time ton (ms)
n = 50 pcs,
IF = 5 mA,
IL = 150 mA
40
Number (pcs)
Normalized On-state Resistance Ron
2.0
Data Sheet PN10569EJ02V0DS
0.12
PS7801E-1A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
2.5
3.0
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VO = 5 V,
RL = 500 Ω
Normalized Turn-off Time toff
Normalized Turn-on Time ton
3.0
2.0
1.5
1.0
0.5
0.0
–25
0
25
50
75
100
Normalized to 1.0
at TA = 25˚C,
IF = 5 mA, VO = 5 V,
RL = 500 Ω
2.5
2.0
1.5
1.0
0.5
0.0
–25
Ambient Temperature TA (˚C)
0
25
50
75
100
Ambient Temperature TA (˚C)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10569EJ02V0DS
7
PS7801E-1A
TAPING SPECIFICATIONS (UNIT: mm)
1.75±0.1
Outline and Dimensions (Tape)
2.9 MAX.
5.3±0.1
1.5+0.1
–0
4.0±0.1
12.0±0.2
2.0±0.05
5.5±0.05
0.3
1.55±0.05
2.4±0.1
2.9±0.1
4.0±0.1
Tape Direction
PS7801E-1A-F3
N
N
N
N
Outline and Dimensions (Reel)
2.0±0.5
φ13.0±0.2
R 1.0
φ 21.0±0.8
φ13.0±0.2
2.0±0.5
φ 330±2.0
φ 100±1.0
<R>
13.5±1.0
17.5±1.0
Packing: 3 500 pcs/reel
8
Data Sheet PN10569EJ02V0DS
11.9 to 15.4
Outer edge of
flange
PS7801E-1A
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.27
5.3
3.6
0.6
4.4
0.8
(0.35)
<R>
( ) : Reference value
24-R0.1
Remark All dimensions in this figure must be evaluated before use.
Data Sheet PN10569EJ02V0DS
9
PS7801E-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C
120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (˚C)
<R>
(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s
180˚C
120˚C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
260°C or below (molten solder temperature)
• Time
10 seconds or less
• Preheating conditions
120°C or below (package surface temperature)
• Number of times
One
• Flux
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
• Peak temperature (lead part temperature)
350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10
Data Sheet PN10569EJ02V0DS
PS7801E-1A
<R>
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10569EJ02V0DS
11
PS7801E-1A
• The information in this document is current as of January, 2008. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
12
Data Sheet PN10569EJ02V0DS
PS7801E-1A
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.