PRELIMINARY DATA SHEET UPG174TA D L-BAND PA DRIVER AMPLIFIER OUTLINE DIMENSIONS (Units in mm) FEATURES PACKAGE OUTLINE T06 • LOW VOLTAGE OPERATION: VDD = 3.3 V • LOW DISTORTION: PADJ1 = -42 dBc TYP @ VDD = 3.3 V, fRF = 1850 to 1910 MHz, POUT = + 8 dBm • 6 PIN MINI-MOLD PACKAGE +0.2 2.8 -0.3 UE • LOW CURRENT OPERATION : IDD = 37 mA TYP @ VDD = 3.3 V, fRF = 1850 to 1910 MHz, POUT = +8 dBm +0.2 1.5 -0.1 3 0.95 4 IN 2.9±0.2 DESCRIPTION APPLICATION SC O • Digital Cellular: (PCS) TDMA, etc. 5 1 6 NT The UPG174TA is an L-Band PA driver amplifier developed for digital cellular telephone and PCS applications. This device features high output power and low distortion with 3.3 V low voltage and 37 mA low current operation. It is housed in a very small 6 pin mini-mold package available on tape and reel. 1.9±0.2 2 0.95 +0.2 1.1 -0.1 -0.05 0.3 +0.10 0.13±0.1 0.8 0 to 0.1 ELECTRICAL CHARACTERISTICS (TA = -35 to +75 ˚C, VDD1,2 = +3.3 V, π/4DQPSK modulated input signal, external input/output matching) PART NUMBER PACKAGE OUTLINE SYMBOLS f GP IDD PADJ1 DI PADJ2 PARAMETERS AND CONDITIONS Operating Frequency Power Gain Total Current Adjacent Channel Power Leakage 1 Adjacent Channel Power Leakage 2 Input Return Loss Output Return Loss RLIN RL OUT PIN = -22 dBm PIN = -22 dBm POUT= +8 dBm ∆f = ± 30 KHz POUT = +8 dBm ∆f = ± 60 KHz External matching UPG174TA T06 UNITS MIN MHz dB mA dBc 1850 26 TYP MAX 1910 30 37 -42 46 -32 dBc -66 -54 dB dB 10 10 California Eastern Laboratories UPG174TA ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) VDD1, 2 PIN PARAMETERS RATINGS V 6.0 SYMBOLS dBm -10 VDD1,2 PIN Supply Voltage 1, 2 Input Power Dissipation2 RECOMMENDED OPERATING CONDITIONS UNITS PT Total Power mW 170 TOP Operating Temperature °C -35 to +75 TSTG Storage Temperature °C -35 to +150 PARAMETERS Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6mm double copper clad epoxy glass PWB, TA = +85 °C. dBm L2 C1 4 5 6 G1D 3 2 1 -22 1 1 6 2 2 5 3 3 4 1. GND 2. GND 3. IN 4. VDD1 5. GND 6. VDD2 & Output NT OUT C3 4 +3.6 (Bottom View) IN C2 R1 G1D 5 (VDD1 = VDD2 = +2.8 V, f = 1429 to 1453 MHz) C5 TYP MAX +3.3 UE 6 VDD2 +3.0 PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM EVALUATION CIRCUIT VDD1 V Input Power (Top View) C4 UNITS MIN Supply Voltage 1,2 D SYMBOLS ZO = 50‰ EVALUATION BOARD IN ZO = 50‰ SC O L1 C1, C2, C4, C5 1000 pF C3 1.8 pF R1 10 Ω L1 5.6 nH L2 VDD1 OUT 2.7 nH 38 mm VDD2 DI ORDERING INFORMATION PART NUMBER UPG174TA-E3 QTY IN 3 Kpcs Per Reel EXCLUSIVE NORTH AMERICAN AGENT FOR 40 mm RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 02/07/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE