NR4510UR PDS

RECEIVER
NR4510UR
 50 m InGaAs APD RECEIVER FOR 2.5 Gb/s
ROSA WITH INTERNAL PRE-AMPLIFIER
DESCRIPTION
1550nm OTDR APPLICATION
DIODE MODULE
The NR4510UR is a InGaAs APD ROSA with an internal pre-amplifier in a
receptacle type package designed for SFF/SFP transceiver with LC duplex
receptacle.
This device is ideal as a receiver for Synchronous Digital
Hierarchy (SDH) system, STM-16, ITU-T recommendations.
FEATURES
• Internal pre-amplifier
• Minimum receiver sensitivity
Pr = 33 dBm
• Wide operating temperature range TC = 40 to +85C
• 50  differential output
• Small package
• Based on Telcordia reliability
Document No. PL10431EJ01V0DS (1st edition)
Date Published November 2003 CP(K)
 4.6 mm ROSA (Total length 12.0 mm MAX.)
NR4510UR
PACKAGE DIMENSIONS (UNIT: mm)
2
Preliminary Data Sheet PL10431EJ01V0DS
NR4510UR
ORDERING INFORMATION
Part Number
Package
 4.6 mm ROSA
NR4510UR
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Ratings
Unit
Forward Current
IF
10
mA
Reverse Current
IR
1.5
mA
Supply Voltage
VCC
4.5
V
Operating Case Temperature
TC
40 to +85
C
Storage Temperature
Tstg
40 to +85
C
Lead Soldering Temperature
Tsld
350 (3 sec.)
C
Relative Humidity (noncondensing)
RH
85
%
ELECTRO-OPTICAL CHARACTERISTICS
(T C = 40 to +85°C, VCC = 3.3 V,  = 1.31 m, 1.55 m, unless otherwise specified)
Parameter
Reverse Break Down Voltage
Temperature Coefficient of Reverse
Symbol
Conditions
ID = 100  A
VBR

MIN.
TYP.
MAX.
Unit
40
60
70
V
0.15
%/C
500
nA
30
dBm
0.09
Breakdown Voltage
Dark Current
Minimum Receiver Sensitivity
ID
VR = 0.9 VBR, TC = 85C
10
Pr
2.48832 Gb/s, BER = 10
33
,
PRBS = 2 1, ER = 10 dB,
23
 = 1.31  m, NRZ, AC-coupled, Mopt
Maximum Optical Input Power
2.48832 Gb/s, BER = 1010,
Povl
6
5
dBm
PRBS = 2 1, ER = 10 dB,
23
 = 1.31  m, NRZ, AC-coupled, M = 3
Sensitivity
Cut-off Frequency
S
M = 1,  = 1.31  m
0.80

M = 1,  = 1.55  m
0.88
AC-coupled, RL = 50 , M = 10,
1.6
fC
A/W
1.9
GHz
3 dB Ref to 100 MHz
Optical Return Loss
Transimpedance
ORL
Zt
SMF
f = 100 MHz, 50  single-ended,
27
dB
1.05
1.4
3.15
3.3
k
AC-coupled 50  load
Supply Voltage
VCC
Supply Current
ICC
Preliminary Data Sheet PL10431EJ01V0DS
3.45
V
45
mA
3
NR4510UR
InGaAs APD/PD FAMILY
Absolute Maximum
Electro-Optical Characteristics (T C = 25C)
Ratings
TC
T stg
Part Number
ID
fC

S
VR
Applications
g
(C)
NR3470MU-CC
Detectin
0 to +75
(C)
40 to +85
Area Size
(nA)
(GHz)
(A/W)
@
(m)
TYP.
MIN.
TYP.
(nm)
 40
5
7.5
1.00
1 550
Package
(V)
5
10 Gb/s:
17-pin mini-butterfly
STM-64
PD with an Internal
pre-amplifer
NR3510UR
NR4270MU-CC
40 to +85
40 to +85


0 to +70
40 to +85
 50
 20
0.1
1.8
*1
1.2 A
7.0
0.80
1 310
0.85
1 550
0.63
*2
1 550
3.3
0.9 VBR
2.5 Gb/s:
PIN ROSA with an
STM-16
Internal pre-amplifer
10 Gb/s:
17-pin mini-butterfly
STM-64
APD with an
Internal pre-amplifer
NR4500BP-CC
0 to +85
40 to +85
 50

2.5
0.94
1 310
0.9 VBR
2.5 Gb/s:
Coaxial APD with
an
NR4500CP-CC
NR4510UR
NR7500 Series
NR7800 Series
NR8500 Series
NR8501 Series


40 to +85
40 to +85


40 to +85
40 to +85


40 to +85
40 to +85


40 to +85
40 to +85


40 to +85
40 to +85


 50
 50
 80
 50
 50

0.1
0.1
7
7
1.6
2.5
2.5
1
2.5
0.96
1 550
0.80
1 310
0.88
1 550
0.89
1 310
0.94
1 550
0.89
1 310
0.94
1 550
0.94
1 310
0.96
1 550
0.94
1 310
0.96
1 550
*1 MAX.
*2 MIN.
4
Preliminary Data Sheet PL10431EJ01V0DS
0.9 VBR
5
STM-16
Internal pre-amplifer
2.5 Gb/s:
APD ROSA with an
STM-16
Internal pre-amplifer
2.5 Gb/s:
Coaxial PD
STM-16
5
 622 Mb/s:
Coaxial PD
STM-4, STM-1
0.9 VBR
 622 Mb/s:
Coaxial APD
STM-4, STM-1
0.9 VBR
2.5 Gb/s:
STM-16
Coaxial APD
NR4510UR
REFERENCE
Document Name
Document No.
OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE
PL10161E
Opto-Electronics Devices Pamphlet
PX10160E
Preliminary Data Sheet PL10431EJ01V0DS
5
NR4510UR
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.