B88069X9731T303

Surge arrester
2-electrode arrester
Series/Type:
Ordering code:
S20-A200X
B88069X9731T303
Version/Date:
Version:
Issue 02 / 2012-09-17
6
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer
PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or
footer when copying the content.
Identification/Classification 1:
(header 1 + top left header bar)
Surge arrester
Identification/Classification 2:
(header 2 + bottom left header bar)
2-electrode arrester
Ordering code:
(top right header bar)
B88069X9731T303
Series/Type:
(top right header bar)
S20-A200X
Preliminary data (optional):

EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
(if necessary)
contained therein without EPCOS' prior express consent is prohibited.
Department:
PPD AB PD / PPD AB PM
EPCOS
AG is a TDK Group Company.
Date:
Issue 02 / 2012-09-17
Surge arrester
2-electrode arrester
B88069X9731T303
S20-A200X
Description
The S20-series has been especially designed to meet data transmission protection requirements.
The optimized design features a high level of protection against fast rising transients usually caused
by lightning disturbances. For use in high frequency data lines, the series offers ultra low
capacitances and shows only marginally signal losses up to high frequencies. The devices are
extremely reliable and are able to withstand high surge currents without destruction.
Features
 Very small size (EIA 1206)
 Short response time
 High current handling capability
 Stable performance over service life
 Ultra low capacitance and insertion loss
 High insulation resistance
 Excellent SMD handling
 RoHS-compatible
Applications
Telecommunication:
 Ethernet, PoE, xDSL
 Cable modem, splitters, line cards
 Wireless antenna protection
Others:
 CCTV
 Switching power supply
Product characteristics
Physical dimensions
(width × height × depth)
0.126 × 0.063 × 0.063
in
3.2 × 1.6 × 1.6
mm
EIA 1206 / 3216 metric
Weight
~ 0.05
g
Operating temperature
–40 ... +90
°C
Recommended storage 1)
- temperature
- humidity
- period
+5 … +35
45 … 80
1
°C
%
year
Climatic category (IEC 60068-1)
40/ 90/ 21
Moisture sensitivity level
2)
1
Marking
without
Certifications
UL 497B *)
Notes:
1)
Specified in terms of corrosion against Sn-plating
2)
Tests according to JEDEC J-STD-020
*)
Pending
PPD AB PD / PPD AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
Issue 02 / 2012-09-17
Page 2 of 7
Surge arrester
2-electrode arrester
B88069X9731T303
S20-A200X
Electrical specifications and stress test methods
Nominal DC spark-over voltage 3) 4)
Tolerance
Min.
Max.
200
±30
140
260
V
%
V
V
Impulse spark-over voltage
at 100 V/µs
- for 99% of measured values
- typical values of distribution
< 700
< 500
V
V
< 1100
< 800
V
V
< 900
< 700
V
V
0.5
150
kA
A
Insulation resistance at 100 VDC
>1
G
Capacitance at 1 MHz
< 0.3
pF
Arc voltage at 1 A
Glow to arc transition current
Glow voltage
~ 10
~ 1.0
~ 60
V
A
V
at 1 kV/µs
- for 99% of measured values
- typical values of distribution
at 10/700 µs, 6 kV - for 99% of measured values
- typical values of distribution
Service life 5) 6)
10 operations [5× (+) & 5× (–)]
10 operations [5× (+) & 5× (–)]
3)
4)
5)
6)
7)
8/20 µs
5/320 µs 7)
At delivery AQL 0.65 level II, DIN ISO 2859
In ionized mode
Tests according to ITU-T Rec. K. 12 and UL 497B
After service life: DC spark-over voltage: 200 V ±40%
Test generator 6 kV, 10/700 µs, 40 
Terms and current waveforms in accordance with ITU-T Rec. K. 12; IEC 61643-21; IEC 61643-311 and IEC 61663-2.
PPD AB PD / PPD AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
Issue 02 / 2012-09-17
Page 3 of 7
Surge arrester
2-electrode arrester
B88069X9731T303
S20-A200X
S-parameters
Circuit diagram:
S21
S11
IN
OUT
S20-A200X
2-pole
Electrical specifications according circuit diagram:
Forward voltage gain S21
(typical values of distribution)
Input port voltage reflection coefficient S11
(typical values of distribution)
a0 [dB]
EPCOS S20-A200X
6
a0 [dB]
EPCOS S20-A200X
1,0
0
0,0
-6
-12
-1,0
-18
-2,0
-24
-30
-3,0
-36
-4,0
-42
-48
-5,0
-54
-60
0E+0
-6,0
2E+9
4E+9
Frequency
1.00 GHz
1.40 GHZ
1.80 GHZ
2.10 GHZ
2.45 GHZ
2.80 GHZ
3.10 GHZ
3.50 GHZ
4.00 GHZ
6.00 GHZ
8.00 GHZ
10.00 GHz
6E+9
8E+9
1E+10
f [Hz]
S11
2E+9
4E+9
Frequency
-24 dB
-22 dB
-20 dB
-19 dB
-18 dB
-17 dB
-17 dB
-16 dB
-15 dB
-13 dB
-11 dB
-10 dB
1.00 GHz
1.40 GHz
1.80 GHz
2.10 GHz
2.45 GHz
2.80 GHz
3.10 GHz
3.50 GHz
4.00 GHz
6.00 GHz
8.00 GHz
10.00 GHz
PPD AB PD / PPD AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
0E+0
6E+9
8E+9
1E+10
f [Hz]
S21
-0.05 dB
-0.07 dB
-0.10 dB
-0.15 dB
-0.17 dB
-0.20 dB
-0.25 dB
-0.30 dB
-0.35 dB
-0.45 dB
-0.80 dB
-1.80 dB
Issue 02 / 2012-09-17
Page 4 of 7
Surge arrester
2-electrode arrester
B88069X9731T303
S20-A200X
Dimensions in mm and inch [...]
Soldering parameters
Solder
Solder bath temperature
Dwell time
Sn 95.5/ Ag 3.8/ Cu 0.7
263 (±3) °C
<3s
PPD AB PD / PPD AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
Issue 02 / 2012-09-17
Page 5 of 7
Surge arrester
2-electrode arrester
B88069X9731T303
S20-A200X
Ordering code and packing advice
B88069X9731T303 = 3000 pcs. on SMD-tape
Reliability inspections
Test
Parameter
Outer dimensions
Environmental testing – test B: dry heat
DIN IEC 60068 part 2-2 test Bd
Environmental testing – test A: cold
DIN IEC 60068 part 2-1 test Ab
Environmental testing – test N: change of temperature
DIN IEC 60068 part 2-14 test Na
Arrester (acc. data sheet)
T = max. operating temperature
period: 16 h
T = min. operating temperature
period = 16 h
Environmental testing – test Cab: damp heat, steady state
DIN IEC 60068 part 2-78 test Cab
Environmental testing – test N: bump
DIN IEC 60068 part 2-29 test Eb
Environmental testing – test Fc: vibration
DIN IEC 60068 part 2-6 test Fc
Environmental testing – test T: soldering
DIN IEC 60068 part 2-20 test Ta method 3
Environmental testing – test Td: solderability (SMD)
DIN IEC 60068 part 2-58 test Td
TA = min. operating temperature;
TB = max. operating temperature
t1 = each 30 min.; cycles = 5
T = 40 °C; relative humidity = 93%
test period = 21 days
a = 400 m/s²; shock period = 6 ms;
shock number = 4000
f = 10 ... 500 Hz; A = 0.75 mm;
a = 100 m/s²; cycles = 10; directions = 2
Enclosing time in delivery status
2 s; after aging 4 s regular QCC-control
Solder temperature = 260 °C
pre heating = 150 °C / 120 s
cooling <50 s; dipping time = 3 × 10 s
Cautions and warnings
 Surge arresters must not be operated directly in power supply networks.
 Surge arresters may become hot in the event of longer periods of current stress (danger of
burning). In the event of thermal overload. the connectors may fail or the component may be
destroyed.
 Damaged surge arresters must not be re-used.
PPD AB PD / PPD AB PM
Please read Cautions and warnings and
Important notes at the end of this document.
Issue 02 / 2012-09-17
Page 6 of 7
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on the
Internet at www.epcos.com/trademarks.
Page 7 of 7