SAW Components, B4240

SAW Components
SAW RF Filter for base station
Trunked Radio
Series/type:
Ordering code:
B4240
B39861B4240H410
Date:
Version:
November 7, 2012
2.0
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Application
■ Low-loss 2-in-1 RF filter for Trunked Radio
■ Low amplitude ripple
■ Usable passband:
Filter 1 : 19 MHz
Filter 2 : 14 MHz
Features
■
■
■
■
■
■
■
Package size 3.0 x 2.5 x 0.98 mm3
Package code QCC8E
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Filter surface passivated
Moisture Sensitive Level 1
Pin configuration
■
■
■
■
■
■
1
3
7
5
2,6
4,8
Input [Filter 1]
Input [Filter 2]
Output [Filter 1]
Output [Filter 2]
To be grounded
Case ground
Please read cautions and warnings and
important notes at the end of this document.
2
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Characteristics of Filter 1
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = -40 to +85˚C
ZS = 50 Ω
ZL = 50 Ω
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
860.5
—
MHz
—
1.8
2.7
dB
αmax
Maximum insertion attenuation
851.0 ... 870.0
MHz
Amplitude ripple (p-p)
851.0 ...
870.0
MHz
—
0.5
1.1
dB
Return loss (Input)
851.0
...
870.0
MHz
10.0
16.0
—
dB
Return loss (Output)
851.0 ...
870.0
MHz
10.0
16.0
—
dB
50
18
15
36
56
34
22
39
—
—
—
—
dB
dB
dB
dB
Absolute Attenuation
100.0
723.0
887.0
997.0
∆α
αabs
... 723.0
... 833.0
... 997.0
... 1500.0
MHz
MHz
MHz
MHz
Maximum ratings of Filter 1
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input Power at
851.0...870.0 MHz
1)
T
Tstg
VDC
VESD
PIN
-40 / +85
-40 / +85
0
100 1)
15
˚C
˚C
V
V
machine model, 10 pulses
dBm
continuous wave 55˚C 10K hours
acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
3
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Transfer Transfer function
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
4
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Smith charts
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
5
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Characteristics of Filter 2
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = -40 to +85˚C
ZS = 50 Ω
ZL = 50 Ω
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
769.0
—
MHz
—
1.6
2.0
dB
αmax
Maximum insertion attenuation
762.0 ... 776.0
MHz
Amplitude ripple (p-p)
762.0 ...
776.0
MHz
—
0.4
1.0
dB
Return loss (Input)
762.0
...
776.0
MHz
12.0
15.0
—
dB
Return loss (Output)
762.0 ...
776.0
MHz
12.0
14.0
—
dB
... 628.0
... 739.0
... 910.0
... 1500.0
MHz
MHz
MHz
MHz
50
25
12
40
58
47
17
42
—
—
—
—
dB
dB
dB
dB
Absolute Attenuation
100.0
628.0
788.0
910.0
∆α
αabs
Maximum ratings of Filter 2
Operable temperature range
Storage temperature range
DC voltage
ESD voltage
Input Power at
762.0...776.0 MHz
1)
T
Tstg
VDC
VESD
PIN
-40 / +85
-40 / +85
0
100 1)
15
˚C
˚C
V
V
machine model, 10 pulses
dBm
continuous wave 55˚C 10K hours
acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
6
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Transfer function(Narrowband)
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
7
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
Smith charts
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
8
November 7, 2012
SAW Components
B4240
SAW RF Filter
860.50 / 769.00 MHz
Data sheet
References
Type
B4240
Ordering code
B39861B4240H410
Marking and package
C61157-A7-A92
Packaging
F61074-V8174-Z000
Date codes
L_1126
S-parameters
B4240_LB_NB.s2p
B4240_LB_WB.s2p
B4240_UB_NB.s2p
B4240_UB_WB.s2p
See file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with
therequirements according to Art. 4 (substance restrictions) of
Directive 2011/65/EU of the European Parliament and of theCouncil of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
9
November 7, 2012
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
10
November 7, 2012