SAW Components, B8532

SAW Components
SAW duplexer
LTE band XXVIII Block B
Series/type:
Ordering code:
B8532
B39771B8532P810
Date:
Version:
May 22, 2014
2.3
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Application
■ Low-loss SAW duplexer for mobile telephone LTE
Band XXVIII systems
Low insertion attenuation
Usable passband 30 MHz
Duplexer for higher part of Band XXVIII (Block B)
Companion type is B8531 for lower Band XXVIII
(Block A)
■ Single ended to balanced transformation
in Antenna - Rx path
■ Impedance transformation 50Ω to 100Ω
in Antenna - Rx path
■
■
■
■
0.3
■ Package size 1.8 x 1.4mm2,
1
0.7
package height 0.475mm max.
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitive Level 3
3
4
8
7
0.475 max.
■ RoHS compatible
■ Approximate weight 0.0042 g
■ Package for Surface Mount Technology
0.35
2
6
5
0.25
0.25
Features
bottom view
side view
1.8
1.4
7
■
■
■
■
1,8
3
6
2,4,5,7
5
8
4
1
Pin configuration
6
2
3
1
RX output
TX input
Antenna
Ground
3
8
4,5
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
top view
2
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
RX terminating impedance:
T = –20 ˚C to +90 ˚C
ZANT= 50 Ω || 7.5 nH
ZTX =
50 Ω + 4.0 nH (series)
ZRX = 100 Ω
Characteristics Tx - Ant
min.
typ.
@ 25 ˚C
733.0
max.
—
MHz
1.9
3.4
dB
747.760MHz
1.1
2.6
dB
748.0
748.0
1.7
1.5
2.0
2.0
Center frequency
fC
—
Maximum insertion attenuation
α
718.240... 747.760MHz
Amplitude ripplle
718.240...
VSWR
TX port
ANT port
Attenuation
718.0
718.0
...
...
α
MHz
MHz
α
0.1 ...
773.0 ...
1436.0 ...
1565.42 ...
1573.374...
1577.466...
1597.55 ...
1830.0 ...
2154.0 ...
2400.0 ...
2872.0 ...
3590.0 ...
4308.0 ...
5026.0 ...
680.0 MHz
803.0 MHz
1496.0 MHz
1573.374MHz
1577.466MHz
1585.42 MHz
1605.89 MHz
1880.0 MHz
2244.0 MHz
2500.0 MHz
2992.0 MHz
3740.0 MHz
4488.0 MHz
5850.0 MHz
Please read cautions and warnings and
important notes at the end of this document.
30
43
35
34
34
34
34
27
30
28
20
20
20
15
3
May 22, 2014
40
47
38
37
37
37
37
35
34
33
32
33
33
24
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
RX terminating impedance:
T = –20 ˚C to +90 ˚C
ZANT= 50 Ω || 7.5 nH
ZTX =
50 Ω + 4.0 nH (series)
ZRX = 100 Ω
Characteristics Rx - Ant
min.
Center frequency
fC
—
Maximum insertion attenuation
α
773.240... 802.760MHz
typ.
@ 25 ˚C
788.0
max.
—
MHz
2.0
2.8
dB
dB
α
Amplitude ripple
773.240...
802.760MHz
0.7
2.1
VSWR
RX port
773.0
...
803.0
MHz
1.7
2.2
ANT port
773.0
...
803.0
MHz
1.7
2.0
1.0
718.0
1710.0
1850.0
1920.0
2400.0
2484.0
2775.0
2880.0
...
...
...
...
...
...
...
...
...
718.0
748.0
1785.0
1920.0
2400.0
2500.0
2775.0
2880.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
α
Attenuation
Characteristics TX - RX
Differntial Mode Isolation
α
718.240... 747.760MHz
773.240...
Common Mode Isolation
718.240...
802.760MHz
40
45
40
40
40
45
40
45
40
62
64
58
54
54
52
51
50
52
dB
dB
dB
dB
dB
dB
dB
dB
dB
min.
typ.
@ 25 ˚C
55
59
dB
50
55
dB
55
61
dB
max.
α
747.760MHz
Please read cautions and warnings and
important notes at the end of this document.
4
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Maximum ratings
Storage temperature range
DC voltage
Tstg
VDC
ESD voltage
VESD
Input power at
718.0 ... 748.0 MHz
elsewhere
1)
2)
3)
–40/+851) ˚C
3
V
3002)
V
Human body model, 1 pulses
6003)
V
Charge device model, 3 pulses
PIN
29
dBm
dBm
10
}
5 MHz LTE uplink
50 ˚C, 3000 h
Extended upperlimit: 168@125˚C acc. to IEC 60068-2-2 Bb.
acc. to JESD22-A114F(HBM-Human Body Model), 1 negative & 1 positive pulses.
acc. to JESD22-C101C (CDM-Field induced Charge Device Model), 3 negative & 3 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
5
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Frequency response Tx-Antenna
Frequency response Tx-Antenna (wideband)
Please read cautions and warnings and
important notes at the end of this document.
6
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Frequency response Antenna-Rx
Frequency response Antenna-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
7
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Frequency Response TX - Ant (passband, CW test signal)
Frequency Responce Ant-RX (passband, CW test signal)
Please read cautions and warnings and
important notes at the end of this document.
8
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Frequency response Tx-Rx ( differential mode, CW signal )
Frequency response Tx-Rx ( common mode, CW signal )
Please read cautions and warnings and
important notes at the end of this document.
9
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
Return loss
S11 Tx-port
S22 Antenna-port
Please read cautions and warnings and
important notes at the end of this document.
10
S33 Rx-portReferences
May 22, 2014
SAW Components
B8532
733.0 / 788.0 MHz
SAW duplexer
Data Sheet
References
Type
B8532
Ordering code
B39771B8532P810
Marking and package
C61157-A8-A79
Packaging
F61047-V8247-Z000
Date codes
L_1126
S-parameters
B8532_NB_UN.s4p, B8532_WB_UN.s4p
See file header for pin/port assignment.
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11
May 22, 2014
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
12
May 22, 2014