EM MICROELECTRONIC - MARIN SA EMBC02 Bluetooth® Low-Energy Proximity Beacon With Accelerometer General Description Features EMBC02 is a Bluetooth Low-Energy proximity beacon with integrated accelerometer for attachment to objects that move. EMBC02 advertises ID data that is compatible with common beacon standards (UUID, Major ID, and Minor ID), ONLY when an object is moving, or ONLY after an object has fallen. There is also a mode to display accelerometer data and gesture counts. Weatherproof Enclosure o IP-64 rating, -20C to +60C operating range o Size: 30mm x 10mm disk; Weight: 7 grams o Replaceable CR2032 3V Li battery o Integrated push-button with LED indicators o PCB-only format also available Accessories o Wall-mount o Key-fob o Wrist-band Selectable ID Mode beaconing o ID packet format includes: UUID, Major ID, and Minor ID Output power information o Sensor Mode: 60m LOS, 1s beacon interval, with tap counter o Moving Mode: 30m LOS, 100ms beacon interval, 1 minute broadcast period after movement is detected o Fall Mode: 120m LOS, 100ms beacon interval, 10 minute broadcast period after a fall is detected Unique Identification o UUID: Similar to EMBC01, EMBC02 is part of the coin-cell family of beacons which come in a small, weatherproof enclosure, using a standard coin-cell battery, or as a PCB panel. A push-button with LED feedback allows the user to select the right operating mode for their deployment. EMBC02 operating modes offer tradeoffs between different functional modes. EMBC02 is shipped pre-programmed with several operating modes: Sleep Mode with over 7 years of shelf life typical Sensor Mode offers 1s beacon interval, 60m range line-of-sight (LOS), and 4.5 months of battery life typical while displaying raw accelerometer data and a tap counter. Moving Mode offers 100ms beacon interval, 30m range, and consumes an average of 275 µA when beaconing and 6 µA while idling. The device only beacons when movement is detected and one minute after the device is still Fall Mode offers 100ms beacon interval, 120m range, and consumes an average of 350 µA when beaconing and 13 µA while idling. The device only beacons after a fall has occurred and 10 minutes after the event Any mode can be locked for final deployment 699EBC80-E1F3-11E3-9A0F-0CF3EE3BC012 o Unique Major and Minor IDs (serialized) o Unique Serial Number o Serial number, Major/Minor ID embedded in QR Code for deployment “EMBC Finder” Smart Device App EMBC02 can be delivered in any quantity with guaranteed unique ID numbers. A unique serial number is printed on the label and encoded in a QR code for optical scanning. iOS App available on App Store o iPhone® 4S and above o iPad® 3 and above (Mini, Air, etc.) Android App available on Google Play™ o 4.3 and newer devices Applications EMBC02 firmware can be customized for individual deployments with the Proximity Beacon Development Kit. Custom parameters include UID, power level, beacon interval, state-machine, gesture alarm mode, gesture threshold, and accelerometer data and settings. Gestures include: any movement, no movement, taps, falls, and shocks. Inventory tracking Electronic Leash Applications Activity monitoring EMBC02 is FCC, IC, and CE certified, RoHS, Reach, and halogen free compliant. Figure 2: EMBC02 with the wall-mount, key-fob, and wrist-band accessory options Figure 1: EMBC02 front and back views Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 1 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. GENERAL DESCRIPTION ................................................................................................................................3 ENVIRONMENTAL AND STORAGE CONDITIONS .........................................................................................4 PRODUCT OUTLINE DIMENSIONS .................................................................................................................4 EMBC02 FINISHED PRODUCT .....................................................................................................................4 EMBC02 PCB PANEL ................................................................................................................................4 MECHANICAL ...................................................................................................................................................5 PUSH BUTTON ............................................................................................................................................5 LED...........................................................................................................................................................5 ELECTRICAL .....................................................................................................................................................5 HANDLING PROCEDURES AND ABSOLUTE MAXIMUM RATINGS .........................................................................5 GENERAL OPERATING CONDITIONS ..............................................................................................................5 ELECTRICAL CHARACTERISTICS ...................................................................................................................5 REGULATORY .............................................................................................................................................6 5.4.1. USA-FCC ..................................................................................................................................6 5.4.2. Canada-IC .................................................................................................................................6 5.4.3. CE .............................................................................................................................................6 5.4.4. Australia/New Zealand ..............................................................................................................6 FIRMWARE ........................................................................................................................................................6 STATE MACHINE .........................................................................................................................................6 6.1.1. Self-Test ....................................................................................................................................7 PACKET CONTENTS ....................................................................................................................................7 6.2.1. Device Address .........................................................................................................................7 6.2.2. Sensor Mode - Sensor Data Packet Format .............................................................................7 6.2.3. Moving/Fall Mode - ID Data Packet Format .............................................................................8 LABEL ................................................................................................................................................................8 SERIAL NUMBER .........................................................................................................................................8 ACCESSORIES .................................................................................................................................................8 KEY-FOB....................................................................................................................................................8 W ALL-MOUNT .............................................................................................................................................9 W RIST-BAND ..............................................................................................................................................9 RELIABILITY ...................................................................................................................................................10 PRODUCT RELIABILITY ...............................................................................................................................10 PACKING RELIABILITY ................................................................................................................................10 PACKING AND LABELING .............................................................................................................................10 EMBC02 FINISHED PRODUCT ...................................................................................................................10 10.1.1. Inner Packing ..........................................................................................................................10 10.1.2. External Packing .....................................................................................................................10 EMBC02 PCB PANELS ............................................................................................................................11 10.2.1. Inner Packing ..........................................................................................................................11 10.2.2. External Packing .....................................................................................................................11 THE EMBC02 BEACONS ARE ENVIRONMENTALLY SAFETY...................................................................11 ORDERING INFORMATION ............................................................................................................................11 CONTACT INFORMATION..............................................................................................................................12 REFERENCE DOCUMENTS ...........................................................................................................................12 Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 2 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 1. GENERAL DESCRIPTION The EMBC02 is a 2.4 GHz RF electronic beacon with proximity capability, compatible with most common beacon standards with a low cost design for mass production. Selectable Functional Modes: Sensor Mode - Sensor data and tap counter always beaconing with: o Sensor Packet Type o 60m typical line-of-site range o 1 s beacon intervals o 12 months of battery life Moving Mode - ID data beaconing only when moving with: o ID Data Packet Type o 30m typical line-of-site range, o 100ms beacon intervals o 1 minute of broadcast time after movement is detected o 275 µA Average Current when beaconing o 6 µA Average Current while still Fall Mode - ID data beaconing only after falling with: o ID Data Packet Type o 120m typical line-of-site range o 100ms beacon intervals o 10 minute timeout o 350 µA Average Current when beaconing o 13 µA Average Current while still Long Battery Life: Replaceable CR2032 Li 3V battery 7 years storage life Normal Operating Conditions: -20 to +60 C Weather proof (IP-64 rating) Fully Customizable: Development kit available Adjustable parameters Packet type and contents, UIDs, beacon interval, power level Sensor data, gesture modes, alerts, thresholds, and other accelerometer parameters Modifiable firmware Added RFID tag (NFC, UHF, etc.) Small and Lightweight: 30mm diameter x 10mm disk 7 grams Certifications: Environmental: RoHS, REACH, Halogen Free RF: FCC, IC, CE Compatible With: Bluetooth Smart Ready Devices Most Common Beacon Standards EMBC Finder A free smart phone and tablet application for: iOS (iPhone 4S and above, iPad 3 and above) Android (4.3 and newer devices) Included Hardware: A white plastic enclosure A push button for mode changes A green and red LED for user feedback A permanent label with a unique serial number and QR Code Optional Mounting Accessories: Wall-mount Key-fob Wrist-band Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 3 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet 2. ENVIRONMENTAL AND STORAGE CONDITIONS The operating and storage conditions are listed in Error! Reference source not found.. Table 1: Environmental and storage conditions Module operating temperature and humidity range Weatherproof Module storage temperature and humidity range -20°C to 60°C and 0 to 90% RH Module can be used in outdoor conditions. It is rated IP64 according to CEI 60529. Modules must be stored in original EM packing at Temp=25°C±10°C / RH≤70%. 3. PRODUCT OUTLINE DIMENSIONS EMBC02 FINISHED PRODUCT The EMBC02 finished product outline dimensions are shown in Figure 3. Figure 3: EMBC02 finished product outline dimensions EMBC02 PCB PANEL EMBC02 is also available in PCB panel format. The PCB panel dimensions are shown in Figure 4. Single board dimension after separation from panel is Ø26mm. Figure 4: EMBC02 PCB Panel dimensions EMBC02 PCB panel is completely populated, and tested. Firmware is loaded and beacons are serialized with unique identification numbers. The good PCBs are marked with ink on the component side of the board. The PCB panel comes without battery holder, battery, or dome switch. Housings and labels are not provided. Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 4 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet 4. MECHANICAL PUSH BUTTON The push button is activated with a firm press. It is designed so that it cannot be activated accidentally. The push button is capable of short (<2 sec) and long (>2 sec) presses. Short presses are used to change modes. A long press is used to lock the present mode. LED The green and red LEDs are visible through the plastic enclosure under indoor lighting conditions. LEDs are used to indicate the operating mode of the beacon. 5. ELECTRICAL Typical values are stated at room temperature (T=25 oC) with a supply voltage of VCC=3.0V. HANDLING PROCEDURES AND ABSOLUTE MAXIMUM RATINGS This device has built-in protection against high static voltages or electric fields; however, anti-static precautions must be taken as with any CMOS components. Unless otherwise specified, proper operation can only occur when all terminal voltages are kept within the specified voltage range. The absolute maximum ratings of EMBC02 are listed in Table 2: Absolute maximum ratings Parameter Supply Voltage VCC - Min Max Unit -0.3 3.8 V VSS Stresses above these listed maximum ratings may cause permanent damage to the device. Exposure beyond specified operating conditions may affect device reliability or cause malfunction GENERAL OPERATING CONDITIONS The general operating conditions of EMBC02 are listed in Error! Reference source not found.. Table 3: General Operating Conditions Parameter Min Typ Max Supply Voltage (VCC) 2.0 3.0 3.6 Temperature range -20 25 +60 Unit V °C ELECTRICAL CHARACTERISTICS The electrical characteristics of EMBC02 are given in Error! Reference source not found.. Unless otherwise specified: VCC=3.0V, T=25°C Operating Mode Sleep Mode Sensor Mode Table 4: Battery Life-Time and Range Specification Min Battery Lifetime Average Current Battery Lifetime Moving Mode Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 Typ 7 1.6 12 Max Unit years µA months Beacon Interval 1000 msec EM9301 Power Level 4 Average Current Distance (range) Beacon Interval EM9301 Power Level 3 Average Beaconing Current Average Idle Current -2 70 60 100 -8 275 6 dBm µA m msec dBm µA µA 5 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet Operating Mode Table 4: Battery Life-Time and Range Specification Min Fall Mode Typ Max Unit Distance (range) 30 m Beacon Interval EM9301 Power Level 7 Average Beaconing Current Average Idle Current Range 100 +4 350 13 120 msec dBm µA µA m Note 1: Battery Lifetime is calculated based on the average current using a Renata CR2032 battery with 225mAh of battery life under typical conditions. Note 2: Beacon interval is the Bluetooth advertising interval (advInterval) as defined in the Bluetooth Specification V4.0, Volume 6, Part B, Section 4.4.2.2. Note 3: Range is measured outdoors, line-of-site, with an iPhone 4S and iPad. REGULATORY EMBC02 complies with the following regulatory requirements: 5.4.1. USA-FCC 5.4.2. Canada-IC 5.4.3. Part 15 – General emissions Part 15.247:2011 – Operation within the band 2.4-2.4835GHz Parts 15.205 and 15.209 – Spurious emissions ICES-003 – General emissions RSS-210:2010 – Low-power License exempt Radio Communication Devices CE EM Microelectronic, as the responsible party for regulatory compliance, declares under our sole responsibility that as delivered the described product is in conformity with the R&TTE Directive 1999/5/EC1, Commission Regulation (EC) No 1275/2008 and 278/2009, following the provisions of ERP Directive 2009/125/EC, EU RoHS Directive 2011/65/EU and carries the CE-marking. SAFETY File 1. 2. 3. 4. 5.4.4. Information on all plastics (flame rating and UL listing) model numbers Battery: Specification, UL listing, and reports from vendor (Standards are UL 1642 and IEC/EN 62133) PCB Board (same info as plastics) Label (same info as plastics) Australia/New Zealand AS/NZS CISPR 22:2009+A1:2010 (tested only, but not filed) 6. FIRMWARE The following is a basic description of EMBC02 firmware functionality. STATE MACHINE The state-diagram for EMBC02-F403 is shown in Figure 5. The firmware implements the following modes: Self-test Sleep-mode Sensor Mode Moving Mode Fall Mode Lock Mode Upon insertion of the battery, a self-test is performed, and EMBC02 then enters a low-power sleep mode. On subsequent short button presses (less than 2 seconds), the green LED flashes once and iterates through Sensor Mode, Moving Mode, and Fall Mode. On the next short button press, the red LED flashes once and then EMBC02 enters the low power sleep mode again. Subsequent short presses iterates through these four modes again. In any state, if a long button press is performed (longer than 2 seconds), the green LED will flash twice and EMBC02 will stay in that mode until the end of battery life. Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 6 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet Figure 5: EMBC02 State-Diagram 6.1.1. Self-Test The self-test function tests the following functions: Perform and verify a system reset Verify battery voltage Verify communication with the accelerometer Verify proper version and operation of the EM9301 Perform calibration of the EM9301 and verify calibration results Transmit 10 advertising packets of Sensor Data and ID data. If the test passes, both LEDs will flash. If the test fails, both LEDs will turn on and remain on. PACKET CONTENTS The Bluetooth advertising packets are non-connectable, undirected advertising events (ADV_NONCONN_IND) which follow the GAP specification according to the Bluetooth Specification V4.0, Volume 3, Part C, Section 11. Packets follow the definitions defined in the EMBC Beacon Packet Specification. 6.2.1. Device Address The first 3 octets of the device address are the EM Microelectronic OUI assigned address from the IEEE 802 committee: 0x0CF3EE. The last 3 octets of the device address are uniquely assigned by EM Microelectronic. 6.2.2. Sensor Mode - Sensor Data Packet Format The Sensor Data packet format is defined in the Beacon Packet Definition Specification in the Sensor Data Packet section. Of the defined 37 bytes, only the Sensor Reading, Model Number and Event Counters are specifically defined for the EMBC02. All other bytes are generic across the EMBC product line. Sensor Reading This field is a sensor reading. The highest nibble represents the sensor type, and the lower 3 nibbles represents the sensor data. The acceleration sensor type is applicable and used for the Sensor Mode of the EMBC02. The data format is listed in Error! Reference source not found. below. Table 5: Sensor types and format definition Description Acceleration Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 MS-nibble 0xB 7 Data Format 12-bit fixed-point 6 fractional bits 2’s compliment Ie +/-16g www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet Model Number This field is a model number. The 16-bit field is a 2-digit ASCII encoded value. For example, EMBC02 will be encoded as “02” = 0x3032. Event Counter This field is a generic event counter. The highest nibble represents the event type, and the lower 3 nibbles represents the event count. The event types listed below are applicable to the EMBC02 product line. In Sensor Mode the Tap counter is selected. Table 6: Event types and format definition Description Any movement Tap Fall 6.2.3. MS-nibble 0xB 0xC 0xD Moving/Fall Mode - ID Data Packet Format In the Moving Mode and the Fall Mode the ID Data type packet is used. The format of the ID Data Packet is described in the following specification: Proximity Beacon Specification Release R1 Draft D1, which can be obtained from Apple, Inc. ID Data ID numbers The following ID numbers are used: The EM Microelectronic UUID is: 699EBC80-E1F3-11E3-9A0F-0CF3EE3BC012 The Major ID is a 16-bit unsigned non-zero value uniquely assigned by EM Microelectronic. The Minor ID is a 16-bit unsigned non-zero value uniquely assigned by EM Microelectronic. ID Data Measured Power Measured power as described in Proximity Beacon Specification Release R1 Draft D1 with iPhone 5S. 7. LABEL The label has the following contents: Model: EMBC02 Unique Serial Number FCC-ID: 2ACQR-EMBC02 IC ID: 12155A-EMBC02 FCC and CE Marking Major ID/Minor ID EM Microelectronic company name QR Code containing the unique Serial Number/Major ID/Minor ID SERIAL NUMBER The serial number is generated by reading the device address of EMBC02, reversing the byte order, and printing the number in decimal form. For example: Device Address: 0x0CF3EE5A0001 corresponds to Serial Number: 001101037237004 8. ACCESSORIES Mounting accessories are available as options and deliverable separately. They are the same accessories as for EMBC01. Snap features allows multiple assembly and disassembly operations. KEY-FOB The outline dimensions of EMBC02 product with the key-fob accessory are shown in Figure 6: Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 8 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet Figure 6: EMBC02 product with key-fob accessory outline dimensions WALL-MOUNT The outline dimensions of EMBC02 product with the wall-mount accessory are shown in Figure 7: Figure 7: EMBC02 product with wall-mount accessory outline dimensions WRIST-BAND The outline dimensions of EMBC02 product with the wrist-band accessory are shown in Figure 8: Figure 8: EMBC02 product with wrist-band accessory outline dimensions Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 9 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet 9. RELIABILITY PRODUCT RELIABILITY EMBC02 complies with reliability tests listed in Error! Reference source not found.. Table 7: EMBC01 Reliability Tests Conditions Test High temperature and humidity test (TH) High temperature storage (HTB) Low temperature storage (LTB) Thermal cycling (TC) Acceptance criteria 85°C / 85%RH for 500h 70 2°C for 500h -20 2°C for 500h From -20°C (15 min) to +65°C (15 min) for 100 cycles. Transfer time ≤ 5 minutes Functional Test is Pass Functional Test is Pass Functional Test is Pass Functional Test is Pass PACKING RELIABILITY The packing complies with the reliability tests listed in Error! Reference source not found.. Table 8: Packing reliability tests Conditions Test Drop test with modules Drop the outer box from 0.8m on concrete: - 6 sides - 8 corners Acceptance criteria Modules Visual Inspection and Functional Test are Pass 10. PACKING AND LABELING EMBC02 FINISHED PRODUCT 10.1.1. Inner Packing EMBC02 beacons are packed in custom antistatic trays. Only one tray per box can have parts from 2 different product lots. Tray size is 300 x 261 x 38 mm. Number of parts per tray is 100pcs. There are 5 trays per stack, excluding cover tray. A label is applied on each stack. The minimum information on the label is specified in Figure 9. EM P/N: Mfg date: Module Lot Nr: Qty: Figure 9: EMBC02 packing label information 10.1.2. External Packing Tray stacks are packed in cardboard box. Quantity of parts per box is 1000 pcs (2 tray stacks). Box dimensions are 37 x 55 x 43 cm. A label is applied on each box. The minimum information on the label is specified in Figure 10. EM P/N: Mfg date: Module Lot Nr: Qty: Weight: Figure 10: Panel packing label information Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 10 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet EMBC02 PCB PANELS 10.2.1. Inner Packing EMBC02 PCB panels are packed in suitable anti-static material. 10.2.2. External Packing EMBC02 are packaged in suitable external packaging. 11. THE EMBC02 BEACONS ARE ENVIRONMENTALLY SAFETY EMBC02 is: RoHS compliant according to EU Directive 2011/65/EU. Halogen Free according to IEC 61249-2-21:2003. REACH compliant according to EU Regulation 1907/2006 12. ORDERING INFORMATION The EMBC02 is available as a finished product in a plastic housing with full FCC, IC, and CE certification. It is also available in PCB form as a panel which requires country certification (ie FCC, CE, etc.) of final product performed by the customer. The EMBC01 wall-mount, key-fob, and wrist-band accessories are available separately. Pre-certification beacons are available for evaluation and development. The EMBC02 Beacon Development Kit is available with 5 pre-certification beacons, an interface board, and cable to the RLink programmer for custom programming. The RLink and RLink Pro can be ordered separately. The EMBC02 ordering information is shown in Figure 11 and the order numbers are shown in Table 9. EMBC02 - F403 H1000 Base Part Number Housing Version: H1000: no logo H2000: EM Micro logo Other: Assigned by EM Accessory Code: EVK: Evaluation kit Firmware Version: F403: Accelerometer Beacon Version Other: Assigned by EM Figure 11: EMBC02 Ordering Information Table 9: EMBC02 Related Order Numbers Container Order Number Description EMBC02EVK Accelerometer beacon, natural, evaluation samples Individual EMBC02-F403-H1000 Accelerometer beacon, natural, no logo EMBC02-F403-H2000 Units per Container Minimum Order Quantity 1 1 Tray 100 100 Tray 100 100 Panel 14 280 EMBC01WMA-H0 Accelerometer beacon, natural, EM Micro logo Accelerometer beacon, PCB panel, no battery, holder, switch Wall Mount accessory, natural Bag 100 100 EMBC01KFA-H2 Key Fob accessory, blue Bag 100 100 EMBC01WBA-H2 Watch Band Accessory, blue Bag 100 100 EMBC01DVK EMBC01 Development Kit Box 1 1 EMBC02DVK EMBC02 Development Kit Box 1 1 EMRLK6819 RLink Box 1 1 EMRLKP6819 RLink Pro Box 1 1 EMBC02-F403 Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 11 www.emmicroelectronic.com 420005-A01, 2.0 EMBC02 Datasheet 13. CONTACT INFORMATION Inquiries for lead-times, quotes, orders: [email protected] 14. REFERENCE DOCUMENTS EM9301 v22 Device specification EM6819 B300 Device specification BMA222E Device Specification EMBC Beacon Packet Specification Bluetooth Specification V4.0 Proximity Beacon Specification Release R1 Draft D EM Microelectronic-Marin SA (“EM”) makes no warranties for the use of EM products, other than those expressly contained in EM's applicable General Terms of Sale, located at http://www.emmicroelectronic.com. EM assumes no responsibility for any errors which may have crept into this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property rights of EM are granted in connection with the sale of EM products, neither expressly nor implicitly. In respect of the intended use of EM products by customer, customer is solely responsible for observing existing patents and other intellectual property rights of third parties and for obtaining, as the case may be, the necessary licenses. Important note: The use of EM products as components in medical devices and/or medical applications, including but not limited to, safety and life supporting systems, where malfunction of such EM products might result in damage to and/or injury or death of persons is expressly prohibited, as EM products are neither destined nor qualified for use as components in such medical devices and/or medical applications. The prohibited use of EM products in such medical devices and/or medical applications is exclusively at the risk of the customer. Bluetooth is a trademark of the Bluetooth SIG. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. Google Play is a trademark of Google Inc. Other product and company names mentioned herein may be trademarks of their respective companies. Copyright 2015, EM Microelectronic-Marin SA EMBC02-DS, Version 1.1, 29-Jun-15 12 www.emmicroelectronic.com 420005-A01, 2.0