EBV Series data sheet 10275.indd

Technical Data 10275
Effective February 2015
Supersedes April 2014
BUSSMANN
SERIES
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Product description
Eaton’s Bussmann series NH Vertical fuse switch
disconnectors are specifically designed to be
used with NH fuse links. All energized metal
parts are fully protected against accidental
contact. They are suitable for direct installation
on horizontal or vertical busbar systems. The
three poles can be switched independently or
simultaneously depending upon the version.
These are manually operated switches and the
making and breaking is dependent on the speed
of the operation. The EBV range is provided
complete with the clamps(i.e. screws/Vterminals/2V-terminals) and shrouds for cable
termination.
Standard features
•
Touch protection IP 30 from the front.
•
Top/bottom cable termination possibility
•
Test holes provided on the cover to measure
the voltage across the link
•
Various options for cable terminations
•
Wide range of accessories
Technical Data 10275
Effective February 2015
Catalogue Symbol:
•
EBV (see table below)
Standard/Approvals:
•
IEC 60947-1 and 3
•
EN 60947-1 and 3
Compatible fuse links:
•
NH 400, 500 and 690 V NH gG and aM fuse links
Technical data
•
Voltage: 690 V a.c.
•
Current: 160 to 910 A
•
Utilisation category:
•
AC21B 690 V a.c. Size 3
•
AC22B 500 V a.c. Sizes 00 to 3
•
AC23B 400 V a.c. Size 00 to 3.
Functionality
•
Designed for installation onto 100 mm or 185 mm busbar system
•
Making and breaking operation should be done with determined
movement
•
Parrallel moving, double contact system
•
Suitable for top cable termination connection
Operating conditions
•
Suitable for installation in environments free of any dust,
explosive or aggressive gases.
•
Altitude up to 2000 metre above sea level
•
Can be used in outdoor environments if they are installed in
IP34 cabinets
•
Relative air humidity should not be higher than 50%
temperature of +40oC
•
Ambient temperature from -25oC to +55oC
Busbar mounting options
•
Size 00 NH gear are available in two versions suitable for installations onto 100 mm busbar and 185 mm busbar system.
100 mm rails can be installed on the 185 mm busbar system by
using an adaptor
•
Sizes 1,2 and 3 are suitable for installation onto 185 mm busbar
system
Packaging
•
2
1 per carton.
EATON www.eaton.com
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Technical Data 10275
Effective February 2015
Table 1. Technical data
Type
Rated thermal current with fuse links Ith = In
Rated thermal current with solid links Ith
Voltage Un
Utilisation category
Rated switching current Ie
Rated short-circuit making current
Rated short-circuit withstand current
Rated insulation voltage Ui
Rated impulse withstand voltage Uimp
Rated short time withstand current Icw
Rated frequency
Mechanical durability
Electrical durability
IP Rating
Fuse links size
A
EBV 00/ 100 mm
160
EBV 00
160
EBV 2
400
EBV 3
630
A
V
N/A
690
N/A
690
600
690
750
690
690 V a.c.
500 V a.c.
AC-22B
N/A
AC-22B
N/A
AC-22B
N/A
AC-21B
AC-22B
400 V a.c.
A
AC-23B
AC-23B
AC-23B
AC-23B
160
160
400
630
25
80
100
80
400 V a.c.
690 V a.c.
25
25
N/A
100
100
100
100
100
100
80
100
80
500 V a.c.
100
N/A
100
100
400 V a.c.
V
kV
kA
Hz
No. of cycles
100
1000
100
1000
100
1000
100
1000
8
N/A
50/60
1600
200
30
00
12
N/A
50/60
1600
200
20
00
12
122)/ 153)
50/60
1000
200
30
1, 2
12
142)/ 163)
50/60
1000
200
30
3
690 V a.c.
500 V a.c.
IP
1: fuse link gTr 630 kVA, DIN 43620, VDE 0636/2011 voltage
2 For disconnectors 1-phase disconnected
3: For disonnectors 3-phase disconnectors
EATON www.eaton.com
3
Technical Data 10275
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Effective February 2015
Table 2. Catalogue numbers
Current Busbar
Catalogue
Size (Amps) System
Numbers
Cable Terminals
Vertical fuse switch disconnector for NH Size 00 for 100 mm busbar system - simultaneous 3 phase switching
00
160
100
EBV0023TS8 Bridge terminals with bridge clamps (s) 4-70mm², screw terminals with M8 screws
Compatible
Pack
Fuse Links
Quantity Weight Size
1
EBV00023TV1 V-terminals with V-clamps 25-120SW
EBV0023TV0 V-terminals, without V-clamps
Vertical fuse switch disconnector for NH Size 00 for 185 mm busbar system - each phase switching separately
00
160
185
EBV0033SS8 Bridge terminals with bridge clamps (s) 4-70 mm², screw terminals with M8 screws
EBV0033SV1 V-terminals with V-clamps 25-120SW
EBV0033SV0
Vertical fuse switch disconnector for NH Sizes 1 and 2 for 185 mm busbar system - each phase switching separately
V-terminals with V-clamps 240 mm2
2
400
185
EBV233SV1
Screw terminals with pressed nuts M10
EBV233SM1
EBV233SW1 2V-terminals with double clamps 240 mm2
V-terminals without V-clamps
EBV233SV0
EBV233SW0 2V-terminals without double V-clamps
Vertical fuse rail suitable for NH Sizes 1 and 2 fuses for 185mm busbar system - simultaneous 3 phase switching
V-terminals with V-clamps 240 mm2
2
400
185
EBV233TV1
Screw terminals with pressed nuts M10
EBV233TM1
2V-terminals with double V-clamps 240 mm2
EBV233TW1
V-terminals without V-clamps
EBV233TV0
2V-terminals without double V-clamps
EBV233TW0
Vertical fuse rail suitable for NH size 3 fuses for 185mm busbar system - each phase switching separately
V-terminals with V-clamps 240 mm2
3
630
185
EBV333SV1
EBV333SM2
EBV333SW1
4
EBV333TM2
EBV333TW1
Screw terminals with pressed nuts M12
EBV333TV0
EBV333TW0
V-terminals without V-clamps
2V-terminals without double V-clamps
EATON www.eaton.com
1
2.8 kg
2.9 kg
2.8 kg
00
1
2.7 kg
2.8 kg
2.7 kg
00
1
5.8 kg
5.7 kg
1 and 2
6.4 kg
5.5 kg
6.9 kg
1
2V-terminals with double V-clamps 240 mm2
5.8 kg
5.7 kg
1 and 2
6.4 kg
5.5 kg
6.9 kg
1
Screw terminals with pressed nuts M12
2V-terminals with double V-clamps 240mm2
V-terminals without V-clamps
EBV333SV0
EBV333SW0 2V-terminals without double V-clamps
Vertical fuse rail suitable for NH size 3 fuses for 185 mm busbar system - simultaneous 3 phase switching
V-terminals with V-clamps 240 mm2
3
630
185
EBV333TV1
00
1.3 kg
V-terminals, without V-clamps
Vertical fuse switch disconnector for NH Size 00 for 185 mm busbar system - simultaneous 3 phase switching
00
160
185
EBV0033TS8 Bridge terminals with bridge clamps (s) 4-70 mm2, screw terminals with M8 screws
EBV0033TV1 V-terminals with V-clamps 25-120SW
EBV0033TV0 V-terminals without V-clamps
1.3 kg
1.5 kg
6.6 kg
6.5 kg
3
7.2 kg
6.3 kg
6.7 kg
1
6.6 kg
6.5 kg
7.2 kg
6.3 kg
6.7 kg
3
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Technical Data 10275
Effective February 2015
Dimensions (mm)
EBV 00 100 mm
EBV 00 (each phase switching separately)
[
[
M8 Screws
M10 Screws
EBV 00 (Three phase switching simultaneously)
[
“
EATON www.eaton.com
5
Technical Data 10275
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Effective February 2015
Dimensions (mm)
EBV 2 (Each phase switching separately)
M12 Screws
EBV 2 (Three phase switching simultaneously)
M12 Screws
6
EATON www.eaton.com
V-Terminals
V-Terminals
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Technical Data 10275
Effective February 2015
Dimensions (mm) EBV 3 (One phase)
M12 Screws
V-Terminals
EATON www.eaton.com
7
Technical Data 10275
Bussmann series
NH Vertical fuse switch disconnectors - EBV range
Effective February 2015
Dimensions (mm) - EBV 3 (Three phase)
M12 Screws
V-Terminals
Changes to the products, to the information
contained in this document, and to prices
are reserved; so are errors and omissions.
Only order confirmations and technical
documentation by Eaton is binding. Photos
and pictures also do not warrant a specific
layout or functionality. Their use in whatever
form is subject to prior approval by Eaton.
The same applies to Trademarks (especially
Eaton, Moeller, and Cutler-Hammer). The
Terms and Conditions of Eaton apply, as
referenced on Eaton Internet pages and
Eaton order confirmations.
Eaton Industries Manufacturing GmbH
Electrical Sector EMEA
Route de la Longeraie
71110 Morges, Switzerland
Eaton.eu
© 2015 Eaton
All Rights Reserved
Publication No. 10275
February 2015
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.