Connectors Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks . . . . . . . . 304-305 N512-BK 12-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 306 NFT2-WH 2-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 306 NFT3-_ _ 3-pole block . . . . . . . . . . . . . . . . . . . . . . . . . .306 NC3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 307 NSE3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 307 NSS3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 307 Rail mount disconnect terminal blocks 15188 Series 3- and 4-Pole blocks . . . . . . . . . . . . . . . . 308 15288 Series 3-Pole block . . . . . . . . . . . . . . . . . . . . . . 308 Sectional terminal blocks PLU3-_ _ 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . .309 PLU1-WH 1- to 3-Pole block . . . . . . . . . . . . . . . . . . . . . 309 PSU1-WH 1- to 3-Pole block . . . . . . . . . . . . . . . . . . . . . 309 KT3-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 310 KT4-WH 4-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . . 310 PLK-3_ _ 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . . 310 Quick-connect terminal blocks NTQ23-WH 3-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 BNQ21-WH 1-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 BQQ41-WH 1-Pole block . . . . . . . . . . . . . . . . . . . . . . . . 311 Double row terminal blocks Series TB100 2- to 36-Pole blocks . . . . . . . . . . . . . 312-313 Series TB200 & TB200HB 2- to 30-Pole blocks . . . . 314-315 Series TB300 & TB345 2- to 24-Pole blocks . . . . . .298-299 2- to 12-Pole standard base . . . . . . . . . . . . . . . . . . . . . 322 2- to 12-Pole flat base . . . . . . . . . . . . . . . . . . . . . . . . . . 323 2- to 12-Pole raised base . . . . . . . . . . . . . . . . . . . . . . . .324 303 Connectors Marking options and covers for double row series . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Top & bottom marking strips for double row terminal blocks . . . . . . . . . . . . . . . . . . . 319 Series TB400 2- to 12-Pole double row terminal blocks . . . . . . . . . . . . . . . . . . . . . . . . . 320 Series KU 2- to 12-Pole base mount double row terminal blocks . . . . . . . . . . . . . . . . . . . . . . 321 Series TS finger-safe terminal blocks Connectors Rail Mount Terminal Blocks NDN Series Specifications Description: High-density, snap-on 35mm DIN rail compatible rail mount terminal blocks. Construction: Unique, impact resistant, one-piece thermoplastic moldings. Heat treated stainless steel collars (to secure wires). Tin-plated copper alloy terminals. Zinc-plated steel screws. Circuits Per Foot: Up to 48 circuits per foot. Agency Information: CE, UL E62622; CSA LR15364. Flammability Rating: UL 94V2 NDNV4-__ __(color) NDN3-__ __(color) NDN63-__ __(color) Specifications Specifications Specifications Description: Rail mount terminal block. Rating: NDNV4 30A, 600V Center Spacing: 0.25" (6.35mm) Number of Poles: 4 Circuits Per Foot: 48 Circuit Jumper: JN4, 4 circuits Wire Range: AWG #10-22 CU Screw Size: #6-32 Mounting Options: 35mm DIN rail, C-rail Marking Tape: MTC6 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Description: Rail mount terminal block. Rating: 30A - field wiring: 40A factory wiring 600V Center Spacing: 0.300" (7.62mm) Number of Poles: 3 Circuits Per Foot: 38 Circuit Jumper: JNDN3, 2 circuits Wire Range: AWG #10-22 CU Screw Size: #6-32 Mounting Options: 35mm DIN rail, C-rail Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Description: Rail mount terminal block. Rating: 65A, 600V Center Spacing: 0.375" (9.52mm) Number of Poles: 3 Circuits Per Foot: 30 Circuit Jumper: JN3, 2 circuits Wire Range: AWG #6-18 CU Screw Size: #10-32 Mounting Options: 35mm DIN rail, C-rail Marking Tape: MT12-1-2 Torque Rating: 35 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Catalog Numbers Catalog Catalog Numbers Catalog Numbers Colors Catalog NDNV4-WH White (Standard) Numbers NDNV4-BK Black NDNV4-YE Yellow 304 Catalog Numbers Numbers Colors Colors NDN63-WH White (Standard) NDN3-WH White (Standard) NDN63-BK Black NDN3-BK Black NDN63-YE Yellow NDN3-BL Blue NDN3-RE Red NDN3-YE Yellow For more information, visit www.cooperbussmann.com Connectors Rail Mount Terminal Blocks NDN1-WH NDN111-__ __(color) Specifications Specifications Description: Rail mount terminal block. Rating: 90A, 600V Center Spacing: 0.635" (16.13mm) Number of Poles: 1 Circuits Per Foot: 18 Wire Range: AWG #2-18 Cu Screw Size: #1/4-28 Mounting Options: 35mm DIN rail, C-rail * Dove-tail option is available for mounting side-by-side. Order part no. NDN1A-WH Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 47235 Description: Rail mount terminal block. Rating: 90A, 600V Center Spacing: 0.635" (16.13mm) Number of Poles: 3 Circuits Per Foot: 18 Circuit Jumper: JN1, 2 circuits Wire Range: AWG #2-18 Cu Screw Size: #1/4-28 Mounting Options: 35mm DIN rail, C-rail, Base Mount * Dove-tail option is available for mounting side-by-side. Order part no. NDN111-A Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 47235 Catalog Numbers Catalog Numbers Catalog Catalog Number Color Numbers Colors NDN1-WH White NDN111-WH White (Standard) NDN111-BK Black NDN111-BL Blue NDN111-RE Red NDN111-YE Yellow NDN111A-WH White NDN111A-BK Black (Standard) NDN111A-YE Yellow Connectors NDN Series Terminal Block Accessories NDNA 35mm DIN Rail Aluminum NDNA 100 1 meter NDNA 200 2 meters NDNAS 35mm DIN Rail End Stop NFTA C-Rail Aluminum Lengths to 72" NRA C-Rail Low Profile No Flange Aluminum Lengths to 37-1/2" SOA72 72" Long Stand-Off Channel For C-Rail For more information, visit www.cooperbussmann.com MARKING TAPE See Series Specifications JUMPERS See Series Specifications 305 Connectors Rail Mount Terminal Blocks N512-BK NFT2-__ __(color) NFT3-__ __(color) Specifications Specifications Specifications Description: Rail mount terminal block. Rating: 5A, 600V; 20A, 300V Center Spacing: 0.197" (5.00mm) Number of Poles: 12 Circuits Per Foot: 60 Circuit Jumper: JN512, 12 circuits Wire Range: AWG #12-22 Cu Screw Size: #4-48 Mounting Options: C-rail, 15mm DIN rail Marking Tape: AT512 Torque Rating: 12 lb-in Operating Temperature: 105°C Agency Information: CSA File 15364. Catalog Numbers Catalog Number Color N512-BK Black Dimensions - in (mm) Description: Rail mount terminal block. Rating: 40A, 600V; 55A Factory Wired Center Spacing: 0.281" (7.13mm) Number of Poles: 2 Circuits Per Foot: 38 Circuit Jumper: JN2, 2 circuits Wire Range: AWG #8-22 Cu Screw Size: #8-32 Mounting Options: C-rail Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Description: Rail mount terminal block. Rating: 40A, 600V 55A Factory Wired Center Spacing: 0.390" (9.91 mm) Number of Poles: 3 Circuits Per Foot: 28 Circuit Jumper: JN3, 2 circuits Wire Range: AWG #8-22 Cu Screw Size: #8-32 Mounting Options: C-rail Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 47235. Catalog Numbers Catalog Numbers Catalog Catalog Numbers Colors Numbers Colors NFT2-WH White NFT3-WH White (Standard) NFT2-BK Black NFT3-BK Black NFT2-BL Blue NFT3-BL Blue NFT2-RE Red NFT3-RE Red NFT3-YE Yellow Dimensions - in (mm) 0.60 (15.44) 0.07 (1.78) 2.40 (60.96) 1.68 (42.82) 1.09 (27.68) 306 1.29 (32.94) 0.93 (23.80) 0.88 (22.35) Dimensions - in (mm) 0.36 (9.14) 1.23 (31.34) 1.18 (29.97) 1.23 (31.37) 0.65 (16.51) For more information, visit www.cooperbussmann.com 1.29 (32.94) Connectors Rail Mount Terminal Blocks NC3-__ __(color) NSE3-WH NSS3-__ __(color) Specifications Specifications Specifications Description: Rail mount terminal block. Rating: 175A, 600V Center Spacing: 1.06" (26.92mm) Number of Poles: 3 Circuits Per Foot: 11 Wire Range: 2/0-#14 Cu/Al Screw Size: 5/16-24 Mounting Options: C-rail, Base Mount Marking Tape: MT12-1-2 Torque Rating: 45 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Catalog Numbers Catalog Description: Rail mount terminal block. Rating: 115A, 600V Center Spacing: 1.06" (26.92mm) Number of Poles: 3 Circuits Per Foot: 11 Circuit Jumper: JNSE3, 2 circuits Wire Range: For use with wire crimped to ring terminal Screw Size: #1/4-28 Mounting Options: C-rail, Base Mount Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Description: Rail mount terminal block. Rating: 30A, 600V Center Spacing: 0.385" (9.77mm) Number of Poles: 3 Circuits Per Foot: 28 Circuit Jumper: JNSS3, 2 circuits Wire Range: For use with wire crimped to ring terminal Screw Size: #6-32 Mounting Options: C-rail Marking Tape: MT12-1-2 Torque Rating: 12 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Catalog Numbers Catalog Number Color Catalog Numbers Number Color NC3-WH White Catalog NSS3-WH White NC3-BK Black Number Color NSS3-BK Black NSE3-WH White Dimensions - in (mm) Dimensions - in (mm) 1.25 (31.75) 1.75 (44.45) Connectors 3.12 (79.38) Dimensions - in (mm) 1.24 (31.50) 0.250 x 0.190 mtg. slots 1.75 (44.45) 1.75 (44.45) 1.25 (31.75) 1.25 (31.75) 0.250 x 0.190" mtg. slots 1.53 (38.86) 3.12 (79.24) 1.32 (33.73) For more information, visit www.cooperbussmann.com 307 Connectors Rail Mount Disconnect Terminal Blocks 15188 Series 15288 Series Specifications Description: Disconnect terminal blocks for 35mm DIN rail mount. Rating: 30A, 600V* Center Spacing: 0.375” (9.52mm) Wire Range: #12-16 AGW Cu Screw Size: #6-32 zinc-plated philslot Number of Poles: 3- and 4-pole only Mounting: 35mm DIN Rail Optional End Stop NDNAS Jumpers: 2- through 4-pole available Materials: Molded Base: UL rated 94V-2 thermoplastic. Tin plated copper alloy contacts. Torque Rating: 12 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 47235. * 30A rating achieved with #10AWG wire crimped to ring terminal; 25A without. Catalog Number Build-A-Code Series Poles Wiring Specifications Description: Disconnect terminal blocks for 35mm DIN rail mount. Rating: 65A, 600V* Center Spacing: 0.54” (13.7mm) Wire Range: #6-16 AWG Screw Size: #8-32 zinc-plated philslot Number of Poles: 3-pole only Mounting: 35mm DIN Rail Optional Accessories: Optional End Stop NDNAS (order optional accessories seperately) Materials: Molded Base: UL rated 94V2 thermoplastic. Tin-plated copper alloy contacts. Torque Rating: 20 lb-in (30 lb-in for 8AWG bare wire) Operating Temperature: 105°C (221°F) Agency Information: UL File E62622 *CSA rating achieved with #6 AWG wire crimped to ring terminal 50A without. Options Catalog Number Build-A-Code 15188 – 3 to 4 Blank = In-line R = Reverse S = Locking Snap Series Poles Wiring Options** 3 Blank = In-line R = Reverse S = Snap ST = Screw Together SS = Solid DIN Rail Snap 15288 – Dimensions - in (mm) In-Line Wiring Direction **Options can be combined, e.g. STSS Dimensions - in (mm) Reverse Wiring Direction 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) 1.94 (49.27) 1.70 (43.2) 2.30 (58.4) for ST option 0.54 (13.7) 1.94 (49.27) Reverse Wiring Direction 3 Pole = 1.19 (30.22) 4 Pole = 1.56 (39.62) 0.375 (9.52) 0.22 (5.58) In-Line Wiring Direction 1.70 (43.2) 1.94 (49.27) 1.94 (49.27) 308 For more information, visit www.cooperbussmann.com Connectors Sectional Terminal Blocks PLU3-_ _(color) PLU1-WH PSU1-WH Specifications Specifications Specifications Description: Depluggable rail mount sectional terminal block. Rating: 40A, 600V Center Spacing: 0.390" (9.91mm) Number of Poles: 3 Circuits Per Foot: 28 Circuit Jumper: JN3, 2 circuits Wire Range: AWG #8-22 Cu Screw Size: #8-32 Mounting Options: C-rail, Stackable Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. Catalog Numbers Catalog Number Color Description: Depluggable rail mount sectional terminal block. Rating: 70A, 600V Center Spacing: 0.625" (15.88mm) Number of Poles: 1-3 Part Numbers: • PLU1 (1-pole) • PLU11 (2-pole) • PLU111 (3-pole) Circuits Per Foot: 19 Circuit Jumper: JN1, 2 circuits Wire Range: AWG #4-18 Cu Screw Size: #1/4-28 Mounting Options: C-rail, Stackable Marking Tape: MT12-1-2 Torque Rating: 32 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364. PLU3-WH White (Standard) PLU3-BK Black Catalog Numbers PLU3-YE Yellow Catalog Catalog Numbers Poles Color Catalog PLU1-WH 1 White Number Poles Color PLU11-WH 2 White PSU1-WH 1 White PLU111-WH 3 White PSU11-WH 2 White PSU111-WH 3 White Dimensions - in (mm) 1.87 (47.49) 1.25 (31.75) 1.25 (31.75) Center Spacing: 0.625" (15.88 mm) Number of Poles: 1-3 Part Number: • PSU1 (1-pole) • PSU11 (2-pole) • PSU111 (3-pole) Circuits Per Foot: 19 Wire Range: For use with crimp on connectors only. Screw Size: #10-32 Mounting Options: C-rail, Stackable Marking Tape: MT12-1-2 Torque Rating: 24 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364 Number 1.25 (31.75) 0.59 (14.98) *45A rating achieved with ring terminal crimped to wire. Dimensions - in (mm) 1.85 (46.99) 1.48 (37.59) 1.93 (49.12) 1.48 (37.64) 0.625 (15.88) 1.79 (45.64) 1.85 (46.99) 2.44 (62.10) 1.25 (31.75) For more information, visit www.cooperbussmann.com 0.43 (11.10) 1.30 (33.00) 309 Connectors Dimensions - in (mm) Description: Depluggable rail mount sectional terminal block. Rating: 45A*, 600V Connectors Sectional Terminal Blocks KT3-_ _(color) KT4-_ _(color) PLK3-WH Specifications Specifications Specifications Description: Depluggable rail mount sectional terminal block. Rating: 40A, 600V Center Spacing: 0.390" (9.91mm) Number of Poles: 3 Circuits Per Foot: 28 Circuit Jumper: JN3, 2 circuits Wire Range: AWG #8-22 Cu Screw Size: #8-32 Mounting Options: Base Mount, Stackable Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364 Catalog Numbers Catalog Number Color KT3-WH White KT3-BK Black KT3-RE Red Description: Depluggable rail mount sectional terminal block. Rating: 30A, 600V Center Spacing: 0.25" (6.35mm) Number of Poles: 4 Part Number: •KT4-WH-A •KT4-WH-B Note: When used in series must order A and B Circuits Per Foot: 48 Circuit Jumper: JN4, 4 circuits Wire Range: AWG #10-22 Cu Screw Size: #6-32 Mounting Options: Base Mount Mounting screws recommended every 12 circuits Marking Tape: MTC6 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364 Catalog Numbers Description: Depluggable rail mount sectional terminal block. Rating: 40A, 600V Center Spacing: 0.39" (9.91mm) Number of Poles: 3 Circuits Per Foot: 28 Circuit Jumper: JN3, 2 circuits Wire Range: AWG #8-22 Cu Screw Size: #8-32 Mounting Options: Base Mount, Stackable; End Piece (Part No. KAD) is required for mounting. Mounting screws recommended every 15 circuits. Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C Agency Information: UL File E62622 Catalog Numbers Catalog Number Color PLK3-WH White Catalog Dimensions - in (mm) 1.87 (47.63) Number Color KT4-WH White KT4-BK Black Dimensions - in (mm) 1.25 (31.75) 0.98 (24.99) 0.25 (6.35) Dimensions - in (mm) 0.37 (9.40) 1.46 (37.22) 0.56 (14.22) 1.22 (31.04) #8 screw clearance KAD end mtg. adapter 0.62 (15.88) 1.84 (46.86) 1.25 (31.75) 2.34 (59.51) 1.25 (31.75) 1.34 (34.04) 310 1.79 (45.52) 1.26 (32.23) For more information, visit www.cooperbussmann.com Connectors Quick-connect Terminal Blocks NTQ23-WH BNQ21-WH BQQ41-WH Specifications Specifications Specifications Description: Quick-connect terminal block. Rating: 40A, 600V Center Spacing: 0.390" (9.91mm) Number of Poles: 3 Circuits Per Foot: 28 Wire Range: AWG #8-22 Cu Screw Size: #8-32 Quick Connects: 0.250” x 0.031” Mounting Options: C-rail Marking Tape: MT12-1-2 Torque Rating: 18 lb-in Operating Temperature: 105°C. Catalog Numbers Catalog Number Color NTQ23-WH White Dimensions - in (mm) Description: Quickconnect terminal block. Rating: 40A, 600V Center Spacing: 0.437" (11.10mm) Number of Poles: 1 Circuits Per Foot: 24 Wire Range: AWG #8-22 Cu Screw Size: #8-32 Quick Connects: 0.250" x 0.031" Mounting Options: Base Mount Stackable; End Piece (Part No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Torque Rating: 18 lb-in Operating Temperature: 105°C Screw Size: #8-32 Agency Information: UL File E62622, CSA File 15364 Description: Quick-connect terminal block. Rating: 30A, 600V Center Spacing: 0.437" (11.10mm) Number of Poles: 1 Circuits Per Foot: 24 Wire Range: For use with quickconnect terminals only. Quick Connects: 0.250" x 0.031" Mounting Options: Base Mount, Stackable; End Piece (Part No. BQE) is required for mounting. Mounting screws recommended every 8 circuits. Operating Temperature: 105°C Agency Information: UL File E62622, CSA File 15364 Catalog Numbers Catalog Catalog Number Color BQQ41-WH White Number Color BNQ21-WH White Dimensions - in (mm) Dimensions - in (mm) #8 mtg. screw #BQE (end mtg. adaptor) #8 mtg. screw Connectors #BQE (end mtg. adaptor) Catalog Numbers 1.25 (31.75) ( 1.25 (31.75) B B A A 0.56 (14.28) 0.56 (14.28) 1.31 (33.32) 1.25 (31.75) 1.47 (37.33) 1.47 (37.33) 1.41 (35.81) For more information, visit www.cooperbussmann.com 1.41 (35.81) 311 Connectors Double Row Terminal Blocks Series TB100 Specifications Description: Double row terminal blocks. Rating: 30A, 300V* Center Spacing: 0.375” or 3/8” (9.52mm) Wire Range: #14 - 22 AWG Cu Screw Size: #6-32 philslot screws Torque Rating: 9 lb-in. Distance Between Barriers: 0.30” (7.62mm) Mounting: #6 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Materials: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: Zinc-plated steel Breakdown Voltage: 3600V Agency Information: UL File E62622/CSA File 47235; IEC Compliance; CE Certified TB100-08 TB100-04SP * Max rating shown; some options may be rated lower, consult Cooper Bussmann. Dimensions - in Poles 02 03 04 05 06 07 08 09 10 11 12 13 A 1.40 1.78 2.16 2.53 2.90 3.28 3.66 4.03 4.40 4.78 5.16 5.53 B 1.12 1.50 1.88 2.25 2.62 3.00 3.38 3.75 4.12 4.50 4.88 5.25 Poles 14 15 16 17 18 19 20 21 22 23 24 25 A 5.90 6.28 6.66 7.03 7.40 7.78 8.16 8.53 8.90 9.28 9.66 10.03 B 5.62 6.00 6.38 6.75 7.12 7.50 7.88 8.25 8.62 9.00 9.38 9.75 Poles 26 27 28 29 30 31 32 33 34 35 36 A 10.40 10.78 11.16 11.53 11.90 12.28 12.66 13.03 13.40 13.78 14.16 B 10.12 10.50 10.88 11.25 11.62 12.00 12.38 12.75 13.12 13.50 13.88 TB100- in (mm) A 0.14 (3.5) 0.14 (3.5) B 0.88 (22.3) 0.31 (7.9) 1” = 25.4mm. 0.17 dia. (4.3) 0.375 (9.5) 0.30 (7.6) 0.41 (10.4) 0.25 (6.3) Catalog Number Build-A-Code Series Poles Screw Options Marking/Cover Hardware Options 02 to 36 Blank = Steel philslot, zinc-plated 00 = Screws shipped bulk B = Brass philslot, nickel-plated BS = Brass Sems philslot, nickel-plated SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) L1 to L6 Marking Strips (See page 318) Special Markings (See page 318) Covers (See page 318) QC1 to QC20 = Quick connects J101 = Flat slip-on jumper (2 position only) 0J2 = Over barrier jumpers 0J4 = Over barrier jumpers TB100 — 312 For more information, visit www.cooperbussmann.com Connectors Double Row Terminal Blocks Screw Options B Brass Philslot Nickel-Plated BS Brass SEMS Philslot Nickel-Plated SP Steel SEMS Philslot Zinc-Plated P Steel (SEMS) (P-Style) ST Stainless Steel Philslot STR Stainless Steel Phillips (recess) Hardware Options Quick Connects – Assembled: Terminals 0.187” x 0.020”. Maximum current rating 13 amps. For other orientations, contact Cooper Bussmann. QC1 QC8 QC14 QC2 QC3 QC4 QC5 QC6 QC9 QC10 QC11 QC12 QC13 QC15 QC16 QC17 QC18 QC19 QC7 QC20 Quick Connects – Bulk: minimum order per part number – 100 pieces. QC104 Flat – Flat Connectors QC101 Flat – none QC102 QC103 QC 45° – none QC 90° – none QC105 Flat – QC 45° QC106 QC107 QC108 QC109 Flat – QC 90°QC 45° – QC 45° QC 45° – QC 90°QC 90° – QC 90° Jumpers – Bulk: minimum order per part number – 100 pieces. Contact Cooper Bussmann for jumper assembly. J101 Flat slip-on OJ2 Slip-on over barrier OJ4 Closed over barrier For more information, visit www.cooperbussmann.com 313 Connectors Double Row Terminal Blocks Series TB200 & TB200HB Specifications Description: Double row terminal blocks. Ratings: Volts: — 300V* (TB200) — 600V* (TB200HB) Amps: — 30A* Center Spacing: 0.437” or 7/16” (11.10mm) Wire Range: #12 - 22 AWG Cu Screw Size: #6-32 philslot screws Torque Rating: 9 lb-in. Distance Between Barriers: 0.353” (8.97mm) Mounting: #6 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Materials: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: zinc-plated steel Breakdown Voltage: 4800V Agency Information: UL File E62622, CSA File 47235 & 15364; IEC Compliance; CE Certified TB200-10SP TB200HB-06 TB200 - in (mm) A 0.16 (4.0) 0.16 (4.0) B 1.12 (28.4) 0.44 (11.2) * Max rating shown; some options may be rated lower - consult factory. Dimensions - in Poles 02 03 04 05 06 07 08 09 10 11 A 1.63 2.07 2.51 2.94 3.38 3.82 4.25 4.69 5.13 5.57 B 1.31 1.75 2.18 2.62 3.06 3.50 3.93 4.37 4.81 5.25 Poles 12 13 14 15 16 17 18 19 20 21 A 6.00 6.44 6.87 7.31 7.75 8.19 8.62 9.06 9.50 9.94 B 5.68 6.12 6.56 7.00 7.43 7.87 8.31 8.75 9.18 9.62 Poles 22 23 24 25 26 27 28 29 30 A 10.37 10.81 11.25 11.68 12.12 12.56 13.00 13.44 13.87 B 10.06 10.50 10.93 11.37 11.81 12.25 12.68 13.12 13.56 0.17 dia. (4.3) 0.437 (11.1) 0.353 (8.9) 0.56 (14.2) .31 (7.8) TB200HB A 0.16 (4.0) 0.16 (4.0) B 1” = 25.4mm. 0.90 1.37 (22.8) (34.8) 0.44 (11.2) 0.17 dia. (4.3) 0.437 (11.1) 0.33 (8.4) 0.353 (8.9) 0.17 x 0.22 slots (4.3 x 5.6) 0.75 (19.0) Catalog Number Build-A-Code Series Poles Screw Options Marking/Cover Hardware Options 02 to 30 Blank = Steel philslot, zinc-plated 00 = Screws shipped bulk B = Brass philslot, nickel-plated BS = Brass Sems philslot, nickel-plated SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot SS = Stainless steel Sems, philslot STR = Stainless steel, phillips (recess) L1 to L6 Marking Strips (See page 318) Special Markings (See page 318) Covers (See page 318) QC1 to QC20 = Quick connects J201 = Flat slip-on jumper (2 position only) 0J3 = Over barrier jumpers 0J5 = Over barrier jumpers 0J7 = Over barrier jumpers — TB 200 = Standard 200HB = High barrier 314 For more information, visit www.cooperbussmann.com Connectors Double Row Terminal Blocks Screw Options B Brass Philslot Nickel-Plated BS Brass SEMS Philslot Nickel-Plated SP Steel SEMS Philslot Zinc-Plated P Steel SEMS (P-Style) ST Stainless Steel Philslot SS Stainless Steel SEMS Philslot STR Stainless Steel Phillips (recess) Hardware Options Quick Connects – Assembled: Terminals 0.25” x 0.031”. Maximum current rating 20 amps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC3 QC4 QC5 QC6 QC8 QC9 QC11 QC10 QC12 QC13 QC14 QC15 QC16 QC17 QC18 QC19 QC7 QC20 Connectors Quick Connects – Bulk: minimum order per part no. – 100 pieces. QC201/J QC 45° – none QC204/J Flat – Flat QC202/J Flat – none QC205/J Flat – QC 45° QC203/J QC 90° – none QC206/J Flat – QC 90° QC207/J QC 45° – QC 45° QC208/J QC209/J QC 45° – QC 90° QC 90° – QC 90° Jumpers – Bulk: minimum. order per part no. – 100 pieces. Contact Cooper Bussmann for jumper assembly. J201/J Flat slip-on (not available on TB200HB) OJ3/J Slip-on over barrier for TB200HB OJ5/J Closed over barrier for TB200HB OJ7/J Closed over barrier for TB200 For more information, visit www.cooperbussmann.com 315 Connectors Double Row Terminal Blocks Series TB300 & TB345 Specifications Description: Double row terminal blocks. Ratings: Volts: — 600V* Amps: — 30A* (TB300) — 45A (TB345) Center Spacing: 0.562” or 9/16” (14.28mm) Wire Range: #8 - 22 AWG Cu Screw Size: TB300 – #8-32 philslot screws TB345 – #10-32 philslot screws Torque Rating: #8 screws - 16 lb-in. ; #10 screws - 20 lb-in. Distance Between Barriers: 0.41” (10.5mm) Mounting: TB300 – #8 screws; TB345 – #10 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Material: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: zinc-plated steel Breakdown Voltage: 7500V Agency Information: UL File E62622, CSA File 47235; IEC Compliance; CE Certified TB300-08 TB345-06SP TB300 & TB345 - in (mm) 8-32 binding head screw - TB 300 10-32 binding head screw - TB 345 * Max rating shown; some options may be rated lower - consult Cooper Bussmann. A 0.22 (5.6) Dimensions - in Poles 02 03 04 05 06 07 08 09 A 2.13 2.69 3.25 3.81 4.37 4.94 5.50 6.06 B 1.69 2.25 2.81 3.37 3.94 4.50 5.06 5.62 Poles 10 11 12 13 14 15 16 17 A 6.62 7.18 7.75 8.31 8.87 9.43 9.99 10.56 B 6.19 6.75 7.31 7.87 8.44 9.00 9.56 10.12 Poles 18 19 20 21 22 23 24 A 11.12 11.68 12.24 12.80 13.37 13.93 14.49 B 10.68 11.25 11.81 12.37 12.93 13.50 14.06 B 0.90 1.33 (22.8) (33.8) 0.50 (12.7) 0.56 (14.2) .21dia. (5.3) 0.56 (14.2) 0.21 x 0.25 slots (5.3 x 6.3) 0.412 (10.4) 1” = 25.4mm. 0.81 (20.5) 0.33 (8.4) Catalog Number Build-A-Code Series TB Poles 300 = 8-32 screw 02 to 24 345 = 10-32 screw 316 Screw Options Marking/Cover Hardware Options Blank = Steel philslot, zinc-plated 00 = Screws shipped bulk B = Brass philslot, nickel-plated BS = Brass Sems philslot, nickel-plated (TB300 only) SP = Steel Sems philslot, zinc-plated P = Steel Sems (P-style) ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) L1 to L6 Marking Strips (pg 318) Special Markings (pg 318) Covers (pg 318) QC1 to QC20 = Quick connects (TB300 only) J301 = Flat slip-on jumper 0J6 = Over barrier jumper 0J11 = Over barrier jumper — For more information, visit www.cooperbussmann.com Connectors Double Row Terminal Blocks Screw Options B Brass Philslot Nickel-Plated BS Brass SEMS Philslot Nickel-Plated SP Steel SEMS Philslot Zinc-Plated P Steel SEMS (P-Style) ST Stainless Steel Philslot STR Stainless Steel Phillips (recess) Hardware Options Quick Connects – Assembled: TB300 only. Terminals 0.25” x 0.031”. Maximum current rating 20 amps. For other orientations, contact Cooper Bussmann. QC1 QC2 QC8 QC9 QC14 QC15 QC3 QC4 QC5 QC6 QC10 QC11 QC12 QC13 QC16 QC17 QC18 QC19 QC7 QC20 QC201 Flat – none QC202 QC 45° – none QC203 QC 90° – none QC204 Flat – Flat QC205 Flat – QC 45° QC206 Flat – QC 90° Connectors Quick Connects – Bulk: (*TB300 only) minimum order per part number. – 100 pieces. QC207 QC208 QC 45° – QC 45° QC 45° – QC 90° QC209 QC 90° – QC 90° Jumpers – Bulk: minimum order per part number – 100 pieces. Contact Cooper Bussmann for jumper assembly. J301 Flat slip-on(TB300 only) OJ6 Closed over barrier OJ11 Slip-on over barrier For more information, visit www.cooperbussmann.com 317 Connectors Marking Options and Covers for Double Row Series 3 2 1 L1 L2 L3 1 2 3 3 2 1 Note: Blocks marked on both sides require a different code for each side. Example Style L1 on one side of the block requires Style L2 on the other side to ensure common terminal marking. To order, add appropriate suffix (L1, L2, L3, L4, L5 and/or L6) to block catalog number in the proper sequence. 1 2 3 1 2 3 Standard markings are applied directly to the side(s) of a block. Standard color is white. Standard height is 0.125 inches (3.17mm). 1 2 3 Standard Marking L4 L5 L6 RED BLK BLU 3 4 134 G 134 20A OUT PUT 3AC GND M 300V MAX A MAS TER 5 K MB Special markings are available at an additional charge for preparation. Production charges for setup, handling and marking are the same as for standard marking. Drawing(s) must be submitted to ensure accuracy of part required. Consult Cooper Bussmann for price and delivery. INPUT Special Marking Note: Marking is not available on TB400 Series Covers Covers prevent personnel, screws and foreign items from contacting live terminals. Available in white or clear plastic. Two cover clips supplied with each cover. Cover width is 1.31 inches (33.3mm). All covers must be ordered separately. Consult Cooper Bussmann for special legends. Example: 10 position cover, white, TB100 Series, no legends = Catalog Number X12010. Catalog Number Build-A-Code Series Cover Strip Poles High Barrier Option Only Cover Clips – Bulk HB = High Barrier Part Number DD1-J – TB100 Series DD2-J – TB200 Series DD2HB-J –TB200HB Series DD3-J – TB300 Series X 120 119 220 219 320 319 - TB100/white TB100/clear TB200/TB200HB - white TB200/TB200HB - clear TB300 & TB345 - white TB300 & TB345 - clear 02 to 36 (TB100) 02 to 30 (TB200/TB200HB) 02 to 24 (TB300/TB345) Example: 10 position cover, white, TB100 Series, no legends . . . Part number is X12010. Note: Covers are not available on TB400 Series. 318 For more information, visit www.cooperbussmann.com Connectors Top & Bottom Marking Strips for Double Row Terminal Blocks Top Marker Strips Top mounting marker strips are available in white (opaque) plastic. Two cover clips are supplied with each marker strip. All top marker strips must be ordered separately. Consult factory for special legends. Example: 12 position cover, TB200, 0.032” x 0.312”, with no legends = Catalog Number X20312. Example: 12 position cover, TB200HB, 0.06” x 0.50”, with no legends = Catalog Number X23312HB. Catalog Number Build-A-Code Series Top Marker Strip Poles High Barrier Option Only 133 - TB100 (0.060 thk x 0.500 w) 103 - TB100 (0.032 thk x 0.312 w) 233 - TB200 (0.060 thk x 0.500 w) 233TB - TB200HB (0.060 thk x 0.500 w) 203 - TB200 (0.032 thk x 0.312 w) 203HB - TB200HB (0.032 thk x 0.312 w) 333 - TB300 & TB345 (0.060 thk x 0.500 w) 303 - TB300 & TB345 (0.032 thk x 0.380 w) Note: Marking Strips are not available on TB400 Series 02 to 36 (TB100) 02 to 30 (TB200/TB200HB) 02 to 24 (TB300/TB345) HB = High Barrier X Example: 12 position cover, TB200HB, 0.060˝ x 0.500˝, with no legends... Part No. is X23312HB. Bottom Marker Strips Bottom mounting marker strips are made of black PVC, 0.030” thick. Space is available to handle most marking situations. All marker strips must be ordered separately. To order, specify part number, required legends and (BF) bottom forward, (BR) bottom reverse, (TF) top forward, or (TR) top reverse. Consult factory for specials. Position for legends (one side, two sides) can be specified standard. Standard legend height is 0.125”. Standard leg-ends are 0-99 and A-Z. Special legends are available on special order. Drawing(s) must be submitted to ensure accuracy of part required. Space for marking one side Space for marking two sides Dimensions (in) Dim. A B TB100 1.13 1.38 TB200 1.37 1.62 TB200HB TB300 1.62 1.58 1.81 1.81 TB345 1.58 1.81 TB400 N/A N/A Catalog Number Build-A-Code Series Bottom Marker Strip Poles High Barrier Option Only Orientation HB = High Barrier BF = Bottom forward BR = Bottom reverse TF = Top forward TR = Top reverse X 105 = TB100/marking one side 02 to 36 (TB100) 101 = TB100/marking both sides 02 to 30 (TB200/TB200HB) 205 = TB200/marking one side 02 to 24 (TB300/TB345) 201 = TB200/marking both sides 295 = TB200HB/marking one side 291 = TB200HB/marking both sides 305 = TB300 & TB345/marking one side 301 = TB300 & TB345/marking both sides Note: Marking Strips are not available on TB400 Series. For more information, visit www.cooperbussmann.com 319 Connectors Example: 13 position strip, TB100 with no legends, space for marking one side = Catalog Number X10513. Connectors Double Row Terminal Blocks Series TB400 Specifications Description: Double row terminal blocks. Ratings: Volts: — 600V Amps: — 75A Center Spacing: 0.687” or 11/16” (17.45mm) Wire Range: #6-14 AWG Cu Screw Size: #10-32 philslot screws Torque Rating: 20 lb-in. Distance Between Barriers: 0.56” (14.3mm) Mounting: #10 screws Operating Temperature: 130°C (266°F) max., -40°C (-40°F) min. Material: Molded base: Black, UL rated 94V0 thermoplastic Terminal plating: Tin over brass; Screws: zinc-plated steel Breakdown Voltage: 7500V Agency Information: UL File E62622, CSA File 47235; IEC Compliance; CE Certified A 2.51 3.20 3.89 4.58 B 2.06 2.75 3.44 4.13 TB400 - in (mm) A B 0.22 (5.6) Dimensions - in Poles 02 03 04 05 TB400-05 Poles 06 07 08 09 A 5.26 5.95 6.64 7.33 B 4.81 5.50 6.19 6.88 Poles 10 11 12 A 8.01 8.70 9.39 B 7.56 8.25 8.94 0.15 dia. (3.8) 0.625 (15.9) 1” = 25.4mm. 1.12 (28.4) 0.22 dia. (5.6) 0.687 (17.4) 0.687 (17.4) 0.562 (14.3) 1.81 (46.0) Screw Options 0.76 (19.3) 0.46 (11.7) 1.34 (34.0) B Brass Philslot Nickel-Plated ST Stainless Steel Philslot STR Stainless Steel Phillips (recess) Hardware Options OJ14: Closed over barrier Catalog Number Build-A-Code Series Poles Screw Options Marking Hardware Options 02 to 12 Blank = Steel philslot, zinc-plated 00 = Screws shipped bulk B = Brass philslot, nickel-plated ST = Stainless steel, philslot STR = Stainless steel, phillips (recess) Not available 0J14† - Jumper over barrier TB400 – †Contact factory for pole configuration. 320 For more information, visit www.cooperbussmann.com Connectors Base Mount Double Row Terminal Blocks Series KU Specifications Description: Base mount double row terminal blocks. Ratings: Volts: — 600V Amps: — 60A* Center Spacing: 0.625” (15.88mm) Number of Poles: 2- to 12-poles Wire Range: #6-22 AWG Cu Screw Size: #10-32 Torque Rating: 20 lb-in. Distance Between Barriers: 0.437” (11.09mm) Mounting: Base mount Material: Molded base: Black, UL rated 94V1 Nuclear Grade Noryl Terminal plating: Nickel over brass Operating Temperature: 105°C max. Agency Information: UL File E62622, CSA File 47235 Series KU - in (mm) B 0.62 (15.9) * 60A rating achieved with #6 copper wire crimped to ring terminal. Dimensions - in KU A 2.50 3.12 3.75 4.37 5.00 5.62 6.25 6.87 7.50 8.12 8.75 B 1.62 2.25 2.87 3.50 4.12 4.75 5.37 6.00 6.62 7.25 7.87 KUX Only A 2.00 2.62 3.25 3.87 4.50 5.12 5.75 6.37 7.00 7.62 8.25 1.50 (38.1) 2.00 (50.8) #10 screw clearance 1.25 (31.8) 0.43 (11.1) 0.50 (12.7) Connectors Poles 02 03 04 05 06 07 08 09 10 11 12 1” = 25.4mm. A Catalog Number Build-A-Code Series Poles Screw Options Covers Marking Strip KU = Standard block KUH = Block KUX = Short block KUSC = Standard w/shorting strap & 4 shorting screws KURL = Standard w/removable link KUXSC = Short block w/shorting strap & 4 Shorting screws KUXRL = Short block w/removable link 02 to 12 00 = Screws shipped bulk W = Brass washer head, nickel-plated P = Steel screw w/pressure plate zinc-plated B = Brass washer head, no plating BP = Brass philslot, nickel-plated WC = Top cover & 2 end plates MT = Matte finish NU = Numbered 1 to 12, horizontal NUV = Numbered 1 to 12, vertical PT = Marker strip for cover Accessories MTMU## Molded Marking Tape Matte Finish NUM## Molded Marking Tape JU12 Jumper 12 Circuits NUE End Piece for NUC NUC## Cover For more information, visit www.cooperbussmann.com 321 Connectors Standard Base Terminal Blocks Series TS — 8.0, 10.0, 12.0, 13.5mm centers Specifications Description: 8, 10, 12 and 13.5mm center, standard base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) — 35A (TS12) — 50A (TS14) Wire Range: See Specifications Table Housing Material: Polyamide Type 6/6, 94V2 (white) Contact Material: Nickel-Plated Brass Wire Protector: Stainless Steel Screw Size: See Specifications Table Operating Temperature: 105°C (221°F) max., -30°C (-22°F) min. Torque Rating: See Specifications Table Agency Information: UL File E62622; CE Certified E C B D A D D A Dimensions - in (mm) Poles 2 3 4 5 6 7 8 9 10 11 12 TS08 0.622 0.937 1.252 1.567 1.882 2.232 2.512 2.827 3.142 3.457 3.772 (15.8) (23.8) (31.8) (39.8) (47.8) (55.8) (63.8) (71.8) (79.8) (87.8) (95.8) TS10 0.689 1.083 1.476 1.870 2.264 2.657 3.051 3.445 3.839 4.232 4.626 (17.5) (27.5) (37.5) (47.5) (57.5) (67.5) (77.5) (87.5) (97.5) (107.5) (117.5) TS12 0.815 1.287 1.760 2.232 2.705 3.177 3.650 4.122 4.594 5.067 5.539 (20.7) (32.7) (44.7) (56.7) (68.7) (80.7) (92.7) (104.7) (116.7) (128.7) (140.7) TS14 0.906 1.437 1.969 2.500 3.031 3.563 4.094 4.626 5.157 5.689 6.220 1.2mm STANDOFF (23.0) (36.5) (50.0) (63.5) (77.0) (90.5) (104.0) (117.5) (131.0) (144.5) (158.0) F F WIRE PROTECTOR Specifications Torque in-lb 3.5 3.5 4.4 4.4 7.0 7.0 12.0 12.0 Position TS0801 TS0802 TS1001 TS1002 TS1201 TS1202 TS1401 TS1402 Clamping Area (mm2) 4.0 1.5 6.0 2.5 10.0 6.0 16.0 10.0 Wire Range AWG (Cu) 22-12 Sol./Str. 22-12 Sol./Str 22-10 Sol., 14-10 Str. 22-12 Sol./Str, 10 Sol. 22-10 Sol./Str. 22-10 Sol./Str. 20-8 Sol./Str. 20-8 Sol./Str. Dimensions Screw M2.6x5 M2.6x5 M3.0x6 M3.0x6 M3.5x7 M3.5x7 M4.0x9 M4.0x9 - in (mm) B 0.67 (17.0) 0.67 (17.0) 0.80 (20.2) 0.80 (20.2) 0.94 (23.8) 0.94 (23.8) 1.01 (25.6) 1.01 (25.6) C 0.57 0.57 0.67 0.67 0.75 0.75 0.99 0.99 (14.5) (14.5) (17.0) (17.0) (19.0) (19.0) (25.2) (25.2) D 0.32 0.32 0.39 0.39 0.47 0.47 0.53 0.53 (8.0) (8.0) (10.0) (10.0) (12.0) (12.0) (13.5) (13.5) Catalog Number Build-A-Code Series Base Poles TS 08 10 12 14 322 = = = = 20A 30A 35A 50A 01 = Standard 02 = Standard w/ wire protector 02 to 12 For more information, visit www.cooperbussmann.com E 0.11 (2.9) 0.11 (2.9) 0.14 (3.6) 0.14 (3.6) 0.14 (3.9) 0.15 (3.9) 0.17 (4.4) 0.17 (4.4) F 0.11 (2.8±0.1) 0.11 (2.8±0.1) 0.13 (3.4±0.1) 0.13 (3.4±0.1) 0.15 (4.2±0.1) 0.15 (4.2±0.1) 0.19 (5.0±0.1) 0.19 (5.0±0.1) Connectors Flat Base Terminal Blocks Series TS — 8.0, 10.0mm centers Specifications Description: 8 and 10mm center, flat base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contact and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) Wire Range: See Specification Table Housing Material: Polyamide Type 6/6, 94V2 (white) Contact Material: Nickel-Plated Brass Wire Protector: Stainless Steel Screw Size: See Specification Table Operating Temperature: 105°C (221°F) max., -30°C (-22°F) min. Torque Rating: See Specification Table Agency Information: UL File E62622; CE Certified E C A Dimensions - in (mm) Poles 2 3 4 5 6 7 8 9 10 11 12 TS08 0.622 0.937 1.252 1.567 1.882 2.232 2.512 2.827 3.142 3.457 3.772 TS10 0.689 1.083 1.476 1.870 2.264 2.657 3.051 3.445 3.839 4.232 4.626 (15.8) (23.8) (31.8) (39.8) (47.8) (55.8) (63.8) (71.8) (79.8) (87.8) (95.8) B D A (17.5) (27.5) (37.5) (47.5) (57.5) (67.5) (77.5) (87.5) (97.5) (107.5) (117.5) D D F F WIRE PROTECTOR Connectors Specifications Position TS0803 TS0804 TS1003 TS1004 Torque in-lb 3.5 3.5 4.4 4.4 Clamping Area (mm2) 4.0 1.5 6.0 2.5 Wire Range AWG (Cu) 22-12 Sol./Str. 22-12 Sol./Str 22-10 Sol., 14-10 Str. 22-12 Sol./Str., 10 Sol. Dimensions Screw M2.6x5 M2.6x5 M3.0x6 M3.0x6 - in (mm) B 0.64 (16.3) 0.64 (16.3) 0.80 (20.2) 0.80 (20.2) C 0.53 0.52 0.62 0.62 (13.3) (13.3) (15.8) (15.8) D 0.32 0.32 0.39 0.39 (8.0) (8.0) (10.0) (10.0) E 0.11 (2.9) 0.11 (2.9) 0.14 (3.6) 0.14 (3.6) F 0.11 (2.8±0.1) 0.11 (2.8±0.1) 0.13 (3.2±0.1) 0.13 (3.2±0.1) Catalog Number Build-A-Code Series Base Poles TS 08 = 20A 10 = 30A 03 = Flat 04 = Flat w/ wire protector 02 to 12 For more information, visit www.cooperbussmann.com 323 Connectors Raised Base Terminal Blocks Series TS - 8.0, 10.0mm centers Specifications Description: 8 and 10mm center, raised base terminal blocks. Construction: Mold to length polyamide type 6/6 housing, nickel-plated brass contacts and stainless steel wire protector. Ratings: Volts: — 600V Amps: — 20A (TS08) — 30A (TS10) Wire Range: See Table Housing Material: Polyamide Type 6/6, 94V2 (white) Contact Material: Nickel-plated Brass Wire Protector: Stainless Steel Screw Size: See Table Operating Temperature: 105°C (221°F) max., -30°C (-22°F) min. Torque Rating: See Table Agency Information: UL File E62622; CE Certified Note: TS Series standard base pictured above. E C A Dimensions Poles 2 3 4 5 6 7 8 9 10 11 12 TS08 0.622 0.937 1.252 1.567 1.882 2.232 2.512 2.827 3.142 3.457 3.772 TS10 0.689 1.083 1.476 1.870 2.264 2.657 3.051 3.445 3.839 4.232 4.626 (15.8) (23.8) (31.8) (39.8) (47.8) (55.8) (63.8) (71.8) (79.8) (87.8) (95.8) (17.5) (27.5) (37.5) (47.5) (57.5) (67.5) (77.5) (87.5) (97.5) (107.5) (117.5) B D A D D 4.3mm F F WIRE PROTECTOR Specifications Position TS0805 TS0806 TS1005 TS1006 Torque in-lb 3.5 3.5 4.4 4.4 Clamping Area (mm2) 4.0 1.5 6.0 2.5 Wire Range AWG (Cu) 22-12 Sol./Str. 22-12 Sol./Str 22-10 Sol., 14-10 Str. 22-12 Sol./Str., 10 Sol. Dimensions Screw M2.6x5 M2.6x5 M3.0x6 M3.0x6 - in (mm) B 0.64 (16.30) 0.64 (16.30) 0.80 (20.20) 0.80 (20.20) C 0.67 0.67 0.79 0.79 (16.90) (16.90) (20.10) (20.10) D 0.32 0.32 0.39 0.39 Catalog Number Build-A-Code Series Base Poles 05 = Raised 06 = Raised w/ wire protector 02 to 12 TS 08 = 20A 10 = 30A 324 For more information, visit www.cooperbussmann.com (8.00) (8.00) (10.00) (10.00) E 0.11 (2.90) 0.11 (2.90) 0.14 (3.60) 0.14 (3.60) F 0.11 (2.8±0.1) 0.11 (2.8±0.1) 0.13 (3.2±0.1) 0.13 (3.2±0.1)