AZ AZ2510

AZ
AZ2510
100 AMP LATCHING
POWER RELAY
FEATURES
•
•
•
•
•
100 Amp switching
Heavy loads to 24000 VA
4 kV dielectric
Meets 8 mm creepage
Mechanical position indicator which may be also used
for manual operation or to actuate a micro-switch
• UL, CUR pending
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 104 at 100 A 240 VAC Res.
Max. switched power: 3000 W, 24000 VA
Max. switched current: 100 A
Max. switched voltage: 30 VDC, 400 VAC
Set and Reset
Pulse Duration
36 ms minimum
Set Time (typical)
12 ms at nominal coil voltage
Reset Time (typical)
6 ms at nominal coil voltage
Rated Load
UL, CUR
100 A at 240 VAC, 10k cycles, Resistive
Material
Silver tin oxide
Resistance
< 2 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Creepage Distance
8 mm
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Power
At Pickup Voltage
(typical)
Temperature
1.44 W single coil
2.88 W dual coil
Shock
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
Max. 105°C (2221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
P. C. (coil), heavy tabs (power)
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
82 grams
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the
terminals to excessive force.
6/4/09
AZ
AZ2510
RELAY ORDERING DATA
COIL SPECIFICATIONS - Standard Single Coil
Nominal Coil
VDC
6
12
24
48
Must Operate
VDC
4.8
9.6
19.2
38.4
Max. Continuous
VDC [1]
10
20
40
80
Coil Resistance
± 10%
16
64
260
1024
ORDER NUMBER
Coil Resistance
± 10%
8
32
130
512
ORDER NUMBER
AZ2510P1–1A–6D
AZ2510P1–1A–12D
AZ2510P1–1A–24D
AZ2510P1–1A–24D
COIL SPECIFICATIONS - Standard Dual Coil
Nominal Coil
VDC
6
12
24
48
Must Operate
VDC
4.8
9.6
19.2
38.4
Max. Continuous
VDC [1]
10
20
40
80
AZ2510P2–1A–6D
AZ2510P2–1A–12D
AZ2510P2–1A–24D
AZ2510P2–1A–48D
[1] max. continuous voltage should not be applied for more than 30 seconds.
MECHANICAL DATA
Outline Dimensions
Wiring Diagram
2.372MAX
[60.25]
1.782MAX
[45.25]
1.421
[36.10]
.756
[19.20]
1.585MAX
[40.25]
.059
[1.50]
3(-)
1.880MAX
[47.75]
Set
4(+)
Reset
2(-)
Dual Coil
3 4
.512
[13.00]
3X.039
[1.00]
.197
[5.00]
2.372MAX
[60.25]
1.746
[44.35]
2
.243
[6.16]
.197
[5.00]
.197
[5.00]
.016
[0.40]
3X.028
[0.70]
.571
[14.50]
.197
[5.00]
3X.039
[1.00]
0.329
[8.36]
3X.028
[0.70]
3(-)
4
(+)
.876MAX
[22.25]
0.571
[14.50]
.433
[11.00]
2(+)
(-)
Set
Reset
Single Coil
2xM6
TOP VIEW
BOTTOM VIEW
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
6/4/09