AZ6975 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • • • Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 10 Amp switching — single pole contacts Isolation spacing greater than 8mm Class F insulation system available UL, CUR file E44211 TUV R50290835 CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 30* VDC or 250 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 10 A 250 VAC Res. Operate Time (max) 15 ms at nominal coil voltage (standard) 20 ms at nominal coil voltage (sensitive) Release Time (max) 8 ms at nominal coil voltage (with no coil suppression) *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory Rated Load UL, CUR Normally Open Contacts (N.O.) 10 A at 250 VAC, Resistive,100k cycles 85°C 10 A at 30 VDC, Resistive 100k cycles 85°C 1/6 HP at 250 VAC, 100k cycles 85°C Normally Closed Contacts (N.C.) 5 A at 250 VAC, Resistive, 100k cycles 85°C 5 A at 30 VDC, Resistive, 100k cycles 85°C TUV 5A NO / 3A NC @ 250VAC / 30VDC, 100k cycles, 85°C 10A NO / 5A NC @ 250VAC / 30VDC, 100k cycles, 85°C 16A NO / 8A NC @ 250VAC / 30VDC, 100k cycles, 85°C Dielectric Strength 5000 VAC contact to coil (at sea level for 1 min.) 1000 VAC between open contacts 10,000 V surge contact to coil Insulation Resistance 1000 megohms min. at 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (266°F) 0.059" DA at 10–55 Hz Material Silver tin oxide Vibration Resistance 100 milliohms max (6 V, 1 A voltage drop method) Shock COIL Power Mechanical Operational 100G 10 G Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds At Pickup Voltage (typical) 353 mW (Standard) 300mW (Sensitive) Max. Solvent Temp. 80°C (176°F) Max. Continuous Dissipation Temperature Rise 1.2 W at 20°C (68°F) ambient 0.9 W at 20°C (68°F) ambient Max. Immersion Time 30 seconds Weight 13 grams Temperature 40° C (104°F) at nominal voltage Max. 105°C (221°F) Max. 155°C (311°F) Class F NOTES 1. All values at 23°C (73.4°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 5/21/15 AZ6975 RELAY ORDERING DATA COIL SPECIFICATIONS (STANDARD) Nominal Coil VDC 3 Must Operate VDC 2.1 Max. Continuous VDC 3.9 5 6 9 12 18 24 48 3.5 4.2 6.3 8.4 12.6 16.8 33.6 6.5 7.8 11.7 15.6 23.4 31.2 62.4 ORDER NUMBER* Coil Resistance 13 ±10% Form A (SPST) AZ6975–1A–3D Form C (SPDT) AZ6975–1C–3D 36 48.5 115 200 450 820 3300 ±10% ±10% ±10% ±10% ±10% ±10% ±10% AZ6975–1A–5D AZ6975–1A–6D AZ6975–1A–9D AZ6975–1A–12D AZ6975–1A–18D AZ6975–1A–24D AZ6975–1A–48D AZ6975–1C–5D AZ6975–1C–6D AZ6975–1C–9D AZ6975–1C–12D AZ6975–1C–18D AZ6975–1C–24D AZ6975–1C–48D Coil Resistance 17 ±10% Form A (SPST) AZ6975–1A–3DS Form C (SPDT) AZ6975–1C–3DS 48.5 68 155 270 600 1100 4400 AZ6975–1A–5DS AZ6975–1A–6DS AZ6975–1A–9DS AZ6975–1A–12DS AZ6975–1A–18DS AZ6975–1A–24DS AZ6975–1A–48DS AZ6975–1C–5DS AZ6975–1C–6DS AZ6975–1C–9DS AZ6975–1C–12DS AZ6975–1C–18DS AZ6975–1C–24DS AZ6975–1C–48DS RELAY ORDERING DATA COIL SPECIFICATIONS (SENSITIVE) Nominal Coil VDC 3 Must Operate VDC 2.25 Max. Continuous VDC 3.9 5 6 9 12 18 24 48 3.75 4.50 6.75 9.00 13.50 18.00 36.00 6.5 7.8 11.7 15.6 23.4 31.2 62.4 ORDER NUMBER* ±10% ±10% ±10% ±10% ±10% ±10% ±10% *For epoxy seal change “D” to “DE”. For class F insulation system add suffix “F” to part number. HARDWARE ORDERING DATA DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST482–U1 Retainer ST482–2 5/21/15 AZ6975 MECHANICAL DATA 6IEWED TOWARD TERMINALS 0# "/!2$ ,!9/54 &ORM ! AND # $)! $)! PLACES &ORM ! PLACES &ORM # 345 &ORM ! &ORM # $)! 7)2).' $)!'2! -!8 $)! 6IEWED TOWARD TERMINALS 2%4!).).' #,)0 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" unless specified. 5/21/15