AZ2280 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Quick-connect leads for contacts and coil 1 Form A, B and C contacts available AC and DC coils available Epoxy sealed versions available UL Class F (155°C) standard UL, CUR file E44211 VDE 40027037 ( DC coil only ) GENERAL DATA CONTACTS Arrangement Ratings UL, CUR SPST (1 Form A, or B) SPDT (1 Form C) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. N.O. Resistive load: Operate Time 15 ms at nominal coil voltage Max. switched power: 840 W or 8310 VA Max. switched current: 30 A (Form A) 15 A (Form B) Max. switched voltage: 277 VAC, 28 VDC Release Time 10 ms at nominal coil voltage (with no coil suppression) 1 Form A 30 A at 277 VAC, General Use [1][2] 28 A at 277 VAC, General Use, 100k cycles [1] 2 Hp at 250 VAC [1][2] 1 HP at 125 VAC [1][2] 30 A at 28 VDC [1] 20/60 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form B 15 A at 277 VAC, General Use [1] 10 A at 28 VDC [1] 0.5 HP at 250 VAC [1] 0.25 HP at 125 VAC [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles [1] 1 Form C 30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2] 20/10 A (N.O./N.C.) at 28 VDC[1] 2/0.5 HP (N.O./N.C.) at 250 VAC[1][2] 1/0.25 HP (N.O./N.C.) at 125 VAC[1][2] 20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1] 10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1] VDE Contact factory for ratings Material Silver cadmium oxide [1], silver tin oxide [2] Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) COIL Power Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 2500 Vrms contact to coil Insulation Resistance 1000 megohms min. at 500 VDC, 20°C 50% RH Dropout DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -55°C (-67°F) to 105°C (221°F) Storage -55°C (-67°F) to 155°C (311°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, Quick Connects Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 36 grams At Pickup Voltage (typical) DC: 500 mW AC: 1.4 VA Max. Continuous Dissipation DC: 1.7 W at 20°C (68°F) AC: 2.7 VA at 20°C (68°F) Temperature Rise 38°C (68°F) 2. Relay may pull in with less than “Must Operate” value. Max. 155°C (311°F) 3. Specifications subject to change without notice. Temperature NOTES 1. All values at 20°C (68°F). 1/14/15 AZ2280 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 5 Must Operate VDC 3.75 Max. Continuous VDC 6.4 Nominal Current mA ± 10% 185 Coil Resistance ± 10% 27 ORDER NUMBER* AZ2280–1A–5DF 6 4.50 7.8 150 40 AZ2280–1A–6DF 9 6.75 12.2 93 97 AZ2280–1A–9DF 12 9.00 15.4 77 155 AZ2280–1A–12DF 15 11.25 19.8 59 256 AZ2280–1A–15DF 18 13.5 24.1 47 380 AZ2280–1A–18DF 24 18.00 32.0 36 660 AZ2280–1A–24DF 48 36.00 62.6 19 2560 AZ2280–1A–48DF 82.5 146.6 13450 AZ2280-1A-110DF 110 8.2 COIL SPECIFICATIONS – AC Coil 50/60 Hz ORDER NUMBER* Nominal Coil VAC 12 Must Operate VAC 10.2 Max. Continuous VAC 13.8 Nominal Coil Power VA 2.3 24 20.4 27.6 2.1 100 120 102.0 138.0 2.3 2,500 AZ2280–1A–120AF 208 176.8 239.0 2.2 11,000 AZ2280–1A–208AF 220/240 187.0 276.0 2.2/2.6 13,490 AZ2280–1A–240AF 277 235.4 318.5 2.2 15,000 AZ2280–1A–277AF Coil Resistance ± 10% 25 AZ2280–1A–12AF AZ2280–1A–24AF *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts. Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version. For 0.110 coil terminals change “F” to “KF.” MECHANICAL DATA 1.08 (27.5) 1.09 (27.8) 0.25 x 0.032 ±0.003 3 places 1.27 (32.4) 1.98 1.71 (50.2) (43.5) 0.187 x 0.02* ±0.003 2 places 0.14 (3.5) * "K" = 0.110 x .02 WIRING DIAGRAM (Top View) 3 2 4 1 5 1 FORM A 3 2 1 5 1 FORM B 2 4 1 5 1 FORM C Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1/14/15