AZ6962 10 AMP SUBMINIATURE POWER RELAY FEATURES • High sensitivity, 120mW pickup • Dielectric strength 5000 Vrms • Isolation spacing greater than 10mm • 10kV surge voltage • Proof tracking index (PTI/CTI) 250 • Class F insulation system standard • 10 Amp switching capability • Epoxy sealed • UL, CUR file E44211 • VDE file 40025524 CONTACTS Arrangement SPDT (1 Form C), SPST (1 Form A) Ratings Resistive load: Max. switched power: 300W or 2500VA Max. switched current: 10A Max. switched voltage: 125 VDC* or 440 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 3 x 107 1 x 105 at 8A 250 VAC res. Operate Time (typical) 7ms at nominal coil voltage Release Time (typical) 3ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR VDE Material 10 A at 250 VAC resistive, 30k cycles (1 Form C) 10 A at 30 VDC resistive, 30k cycles (1 Form C) B300, R300 Pilot Duty (1 Form C) 1/2 HP at 240 VAC, 30k cycles (N.O.) 1/3 HP at 120 VAC, 30k cycles (N.O.) 8 A at 250 VAC resistive, 100k cycles (1 Form A, and 1 Form C) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 2500 Vrms between contact sets 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 100°C (185°F) -40°C (-40°F) to 155°C (221°F) Vibration Break Contact: 0.8mm DA 10 …55 Hz Make Contact: 1.65mm DA 10…55 Hz Shock NO: 10g NC: 5g Enclosure P.B.T. polyester, UL94 V-O Silver tin oxide COIL Power Terminals Tinned copper alloy, P.C. 120 mW (up to 24 VDC coil) (1 pole) 140 mW (48 VDC and 60 VDC coil) (1 pole) Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Continuous Dissipation 1.2W at 20°C (68°F) ambient Max. Solvent Temp. 80°C (176°F) Temperature Rise 20°C (36°F) at nominal coil voltage Max. Immersion Time 30 seconds Max. 155°C (311°F) Weight 8 grams At Pickup Voltage (typical) Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 9/08/15 AZ6962 RELAY ORDERING DATA COIL SPECIFICATIONS - 1A & 1C Nominal Coil VDC 5 Must Operate VDC 3.5 Max. Continuous VDC 11.6 6 4.2 14.0 ORDER NUMBER* Coil Resistance Ohm 113 ± 10% 164 ± 10% 1 Form A (SPST-NO) AZ6962–1AE–5DE 1 Form C (SPDT) AZ6962–1CE–5DE AZ6962–1AE–6DE AZ6962–1CE–6DE 9 6.3 20.8 360 ± 10% AZ6962–1AE–9DE AZ6962–1CE–9DE 12 8.4 27.2 620 ± 10% AZ6962–1AE–12DE AZ6962–1CE–12DE 15 10.5 31.0 970 ± 10% AZ6962–1AE–15DE AZ6962–1CE–15DE 18 12.6 39.4 1,295 ± 10% AZ6962–1AE–18DE AZ6962–1CE–18DE 24 16.8 53.1 2,350 ± 15% AZ6962–1AE–24DE AZ6962–1CE–24DE 48 33.6 98.0 8,000 ± 15% AZ6962–1AE–48DE AZ6962–1CE–48DE 60 42.0 122.4 12,500 ± 15% AZ6962–1AE–60DE AZ6962–1CE–60DE Add suffix “A” for gold plated contacts. Coil Temperature Rise Coil Temperature Rise °C MECHANICAL DATA 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 10A 0A 60% 80% 100% 120% 140% 160% 180% 200% 220% Percent of Nominal Coil Voltage at 20°C Maximum Switching Capacity (1 Form A, and 1 Form C) 10.0 9.0 8.0 7.0 6.0 5.0 DC Resistive Load 4.0 3.0 AC Resistive Load CURRENT 2.0 1.0 .9 .8 .7 .6 .5 .4 .3 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" VOLTAGE 9/08/15 1000 400 500 600 700 800 900 300 200 100 50 60 70 80 90 40 30 20 .1 10 .2