AZ2705 30 AMP POWER RELAY FEATURES • 30 Amp switching • 30 Amp AC7a approved • 900 Amp Short curcyut cyrrent (carrying) • PC mount and quick connect terminals • Dielectric strength 4000Vrms • Standard (2.4 mm) and wide contact gap (3.0 mm) available • UL, CUR file E44211 • TÜV certifcate R50164753 CONTACTS Arrangement SPST (1 Form X) DPST (2 Form X) Ratings Resistive load: Max. switched power: 840W or 8310VA Max. switched current: 30A Max. switched voltage: 300 VDC* or 400 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at rated load precautions must be taken. Please contact the factory. Operate Time (max) 30ms at nominal coil voltage Rated Load 30A at 277 VAC, resistive 30k cycles [1][2] Release Time (max) UL, CUR 25A at 277 VAC, resistive, 100k cycles [2] 25A at 240 VAC, resistive, 100k cycles [1] 3HP at 240 VAC, 6k cycles [1] 1.5HP at 120 VAC, 6k cycles [1] TV-10 at 120 VAC, 6k cycles [1] 105 LRA / 20.5 FLA at 240 VAC, 100k cycles [1] 30ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000Vrms coil to contact (at sea level for 1 min.) 2000Vrms between open contacts *Note: If switching voltage is greater than 30 VDC, special SPST (1 Form X) 10A at 120 VAC, tungsten, 6k cycles [1][2] 3HP at 240 VAC, 100k cycles [2] 1.5HP at 120 VAC, 100k cycles [2] DPST (2 Form X) 10A at 277 VAC, tungsten, 6k cycles [2] 10A at 120 VAC, tungsten, 6k cycles [1] 2HP at 277 VAC, 75k cycles [2] 1HP at 125 VAC, 30k cycles [2] TÜV 27A at 240VAC, cos phi 0.8, 50k cycles [1][2] 25A at 240VAC, cos phi 0.4, 50k cycles [1][2] Material [1] Silver cadmium oxide, [2] silver tin oxide Resistance < 100 milliohms initially (24V, 1A voltage drop method) COIL 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage (DC) Greater than 15% of nominal coil voltage (AC) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) - Class B -40°C (-40°F) to 105°C (221°F) - Class F -40°C (-40°F) to 130°C (266°F) - Class B -40°C (-40°F) to 155°C (311°F) - Class F Vibration 0.062" DA at 10–55 Hz Shock 10g, 11ms, 1/2 sine (no false operation) Operating Non-Operating 100g, 11ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Terminals Tinned copper alloy, Quick connect tabs Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Power At Pickup Voltage (typical) 1.08W (DC) 1.7VA (AC) Max. Continuous Dissipation 3.8 W at 20°C (68°F) ambient Temperature Rise 50°C (90°F) at nominal coil voltage Temperature Insulation Resistance Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F Weight 120 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 8/17/15 AZ2705 RELAY ORDERING DATA COIL SPECIFICATIONS – DC COIL Nominal Coil VDC 3 6 12 24 48 100 110 200 ORDER NUMBER* Must Operate VDC 2.3 4.5 9.0 18.0 36.0 75.0 82.5 150.0 Max. Continuous VDC 4.2 8.4 16.8 33.7 67.5 140.5 154.7 282.4 Coil Resistance ± 10% 5 19 75 300 1200 5200 6300 21000 COIL SPECIFICATIONS – AC COIL Nominal Coil VAC 6 12 24 48 120 220 240 Must Operate VAC 4.8 9.6 19.2 38.4 96.0 176.0 192.0 1 Form X 2 Form X AZ2705–1A–3D AZ2705–1A–6D AZ2705–1A–12D AZ2705–1A–24D AZ2705–1A–48D AZ2705–1A–100D AZ2705–1A–110D AZ2705–1A–200D AZ2705–2A–3D AZ2705–2A–6D AZ2705–2A–12D AZ2705–2A–24D AZ2705–2A–48D AZ2705–2A–100D AZ2705–2A–110D AZ2705–2A–200D ORDER NUMBER* Max. Continuous VAC 6.6 13.2 26.4 52.8 132.0 242.0 264.0 Coil Current mA ± 10% 319 160 80 40 23 10 9 1 Form X AZ2705–1A–6A AZ2705–1A–12A AZ2705–1A–24A AZ2705–1A–48A AZ2705–1A–120A AZ2705–1A–220A AZ2705–1A–240A 2 Form X AZ2705–2A–6A AZ2705–2A–12A AZ2705–2A–24A AZ2705–2A–48A AZ2705–2A–120A AZ2705–2A–220A AZ2705–2A–240A *For silver tin oxide add suffix “T.”. For wide contact gap add “W”. For Class F add suffix “F”. MECHANICAL DATA 2xM3.5 1.33 Max [33.8] 2 6 4 8 .177 [4.5] 2.02 Max [51.3] 4xM4 1.99 [50.5] 2.36 [60] 2.69 Max [68.3] .118 [3.0] Wiring Diagrams 1 Form x 4 With capacitor AC operation coil 2 Form x 6 2 4 6 8 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/17/15