AZ692/AZ693 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Isolation spacing greater than 8 mm Dielectric strength 4000 Vrms coil to contact Approvals/Standards include UL, VDE, IEC Single pole — Forms A, B, C available 10 Amp switching Life expectancy to 30 million operations Epoxy sealed version for automatic wave soldering and cleaning • UL, CUR file E44211; VDE 40018299 CONTACTS Arrangement SPDT (1 Form C) SPST (1 Form A and 1 Form B) Ratings Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A; 64 A for 2 ms Max. switched voltage: 150* VDC or 380 VAC UL Rating 10 A at 24 VDC or 115 VAC 1/4 HP 120 VAC motor load 10 A at 250 VAC B 300 pilot duty GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 30 million operations 1 x 105 at 10 A, 30 VDC or 115 VAC 2 x 105 at 8 A, 250 VAC Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 10,000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage Standard: -55°C (-67°F) to 70°C (158°F) Sensitive: -55°C (-67°F) to 80°C (176°F) Both: -55°C (-67°F) to 110°C (230°F) Storage * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide Resistance < 30 milliohms initially (at rated current, voltage drop method) COIL Power At Pickup Voltage (typical) Standard coil: 337 mW Sensitive coil: 234 mW Max. Continuous Dissipation 1.9 W at 20°C (68°F) ambient 1.4 W at 40°C (104°F) ambient Temperature Rise Standard: 40°C (72°F) at nominal coil voltage Sensitive: 26°C (47°F) at nominal coil voltage Vibration 0.062" DA at 10–55 Hz Shock 20 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 17 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. Temperature Max. 110°C (230°F) 4. Specifications subject to change without notice. 8/2/12 AZ692/AZ693 INTERNATIONAL APPROVALS Passed International Electrical Code IEC 380 Germany VDE VDE VDE VDE VDE 0860/8.81 paragraphs 10, 14 0806/8.81 paragraphs 7, 11, 15, 16, 29 0631/9.77 paragraphs 9, 12, 14 0730/T.1/3.72 paragraph 22 0435/9.72 (with production monitoring) U.S.A. UL File E44211 RELAY ORDERING DATA: Single Pole .138 Spacing STANDARD RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 38 Must Operate VDC 3.5 Unsealed AZ692–125–2 Sealed AZ2692–125–2 6 10 58 4.2 AZ692–112–2 AZ2692–112–2 12 19 215 8.4 AZ692–08–2 AZ2692–08–2 24 35 740 16.8 AZ692–560–2 AZ2692–560–2 48 74 3,200 33.6 AZ692–04–2 AZ2692–04–2 SENSITIVE RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 47 Must Operate VDC 3.5 Unsealed AZ692–118–52 Sealed AZ2692–118–52 6 10 80 4.2 AZ692–010–52 AZ2692–010–52 12 21 330 8.4 AZ692–071–52 AZ2692–071–52 24 41 1,200 16.8 AZ692–052–52 AZ2692–052–52 48 80 4,700 33.6 AZ692–518–52 AZ2692–518–52 *Substitute “4 or 54,” “6 or 56” in place of “2 or 52” to indicate 1 Form A and 1 Form B respectively. HARDWARE ORDERING DATA — AZ692† DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST482–U1 Retainer ST482–2 † See following pages for diagram MECHANICAL DATA Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/2/12 AZ692/AZ693 RELAY ORDERING DATA: Single Pole .100 Spacing STANDARD RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC 5 Max. Continuous VDC 8 Coil Resistance ± 10% 38 Must Operate VDC 3.5 Unsealed AZ693–125–2 Sealed AZ2693–125–2 6 10 58 4.2 AZ693–112–2 AZ2693–112–2 12 19 215 8.4 AZ693–08–2 AZ2693–08–2 24 35 740 16.8 AZ693–560–2 AZ2693–560–2 48 74 3,200 33.6 AZ693–04–2 AZ2693–04–2 SENSITIVE RELAYS: 1 Form C (SPDT) COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 8 ORDER NUMBER* Coil Resistance ± 10% 47 Must Operate VDC 3.5 Unsealed AZ693–118–52 Sealed AZ2693–118–52 6 10 80 4.2 AZ693–010–52 AZ2693–010–52 12 21 330 8.4 AZ693–071–52 AZ2693–071–52 24 41 1,200 16.8 AZ693–052–52 AZ2693–052–52 48 80 4,700 33.6 AZ693–518–52 AZ2693–518–52 *Substitute “4 or 54,” “6 or 56” in place of “2 or 52” to indicate 1 Form A and 1 Form B respectively. HARDWARE ORDERING DATA — AZ693† DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST483–U1 Retainer ST482–2 † See following pages for diagram MECHANICAL DATA MAXIMUM SWITCHING CAPACITY Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/2/12 AZ692/AZ693 Coil Temperature Rise HARDWARE SPECIFICATIONS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/2/12