BT09AG - Berex

BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Device Features





OIP3 = 43.0 dBm @ 900 MHz
Gain = 20.0 dB @ 900 MHz
Output P1 dB = 24.5 dBm @ 900 MHz
50 Ω Cascadable
Lead-free/RoHS-compliant SOT-89 SMT package
Product Description
Typical Performance1
BeRex’s BT09AG is a high performance and a
high dynamic range amplifier in a low cost
surface mount package(SOT-89) with a RoHS
-compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices
fabricated with InGaP GaAs technology.
This device is designed for use where high
linearity is required and features high OIP3
and P1 .
Requires a few external matching components such as a DC blocking capacitors on
the In/Output pin, a bypass capacitor and a
RF choke for the out port.
All devices are 100% RF/DC tested.
Parameter
Applications
Vcc
Bypass
RF Choke
RF In
RF Out
BT09AG
DC
Block
DC
Block
Unit
900
1900
2450
3500
MHz
Gain
20.0
14.5
12.5
9.20
dB
S11
-17.0
-22.0
-16.0
-17.0
dB
-14.0
-16.0
-24.0
-23.0
dB
43.0
24.5
4.2
43.0
24.2
4.2
43.0
26.0
4.3
39.0
25.8
5.0
dBm
dBm
dB
S22
2
OIP3
P1dB
Noise Figure
1
Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
2
OIP3 _ measured with two tones at an output of 14 dBm per tone separated by 1 MHz.
Min.
Bandwidth
IC @ (Vc = 5V)
VC
RTH
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Application Circuits
Frequency
Typical
5
140
160
5.0
50
Max.
Unit
4000
180
MHz
mA
V
°C/W
Absolute Maximum Ratings
Parameter
Operating Case Temperature
Storage Temperature
Junction Temperature
Operating Voltage
Supply Current
Input RF Power
Rating
-40 to +85
-55 to +155
+220
Unit
°C
°C
°C
+7.0
220
23
V
mA
dBm
*Operation of this device above any of these parameters may result in permanent damage.
*external matching circuit: refer to the page 5 to 13.
BeRex
●website: www.berex.com
● email: [email protected]
1
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
V-I Characteristics
BeRex SOT89 Evaluation Board
BeRex
Evaluation Board
*Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB
Typical Device Data
S-parameters (Vc=5V, Ic=162mA, T=25°C)
BeRex
●website: www.berex.com
● email: [email protected]
2
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
S-Parameter
(Vdevice = 5.0V, Icc = 162mA, T = 25 °C, calibrated to device leads)
Freq
[MHz]
S11
S11
S21
S21
S12
S12
S22
S22
dB
Ang
dB
Ang
dB
Ang
dB
Ang
100
500
1000
1500
2000
2500
3000
3500
4000
-4.07
-3.168
-2.660
-2.673
-2.835
-3.238
-3.108
-2.733
-2.13
176.11
154.36
124.21
95.30
66.61
32.55
-5.552
-42.25
-71.93
23.805
20.639
16.421
13.291
11.151
9.711
8.137
6.121
4.604
162.696
108.6
66.7556
37.077
9.186
-19.52
-49.49
-78.61
-100.97
-31.49
-30.63
-29.14
-27.53
-25.83
-24.37
-23.08
-23.30
-22.79
0.3816
2.108
-3.335
-12.30
-22.90
-40.16
-63.43
-84.36
-104.55
-10.62
-8.770
-7.815
-7.601
-8.033
-9.343
-10.36
-9.213
-7.32
179.54
164.09
137.25
115.23
94.350
70.088
33.584
-8.5102
-41.052
Typical Performance (Vd = 5V, Ic = 162mA, T = 25°C)
BeRex
Freq
MHz
70
170
240
500
900
1900
2450
S21
dB
24.7
25
24.8
23
20.0
14.5
12.5
S11
dB
-18
-19
-20
-17
-17
-22
-16
S22
dB
-18
-16
-26
-16
-14
-16
-24
P1
dBm
24.5
25.5
25
24.5
24.5
24.2
26
OIP3
dBm
39
40
40
41.5
43
43
43
NF
dB
3.7
3.8
3.9
3.8
4.2
4.2
4.3
●website: www.berex.com
● email: [email protected]
3
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
WCDMA 6FA 2140 –55dBc
WCDMA 6FA 2140 –60dBc
BeRex
●website: www.berex.com
● email: [email protected]
4
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
ACLR
Application Circuit: 70~500 MHz
Schematic Diagram
C1
C2
C3
C4
L2
C5
BT09AG
C6
BeRex
●website: www.berex.com
70MHz
170MHz
240MHz
500MHz
C1
100pF
100pF
100pF
100pF
C2
100pF
100pF
100pF
100pF
C3
10uF
10uF
10uF
10uF
C4
8200pF
8200pF
8200pF
8200pF
C5
8200pF
8200pF
8200pF
8200pF
C6
86pF
33pF
22pF
10pF
L1
330nH
100nH
100nH
100nH
L2
47nH
18nH
12nH
4.7nH
+5V
L1
RFin
BOM
RFout
● email: [email protected]
5
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
6
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Application Circuit: 900 MHz
Schematic Diagram
BOM
C2
C1
C3
+5V
L1
RFin
L2
C4
C7
C5
BT09AG
C6
L3
RFout
C1
C2
C3
C4
C5
C6
C7
L1
L2
L3
Tolerance
100pF
1000pF
10uF
100pF
100pF
8pF
10pF
39nH
1.8nH
6.8nH
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: 1. PCB: 31mil thick FR4.
10uF
1000 pF
100pF
100 pF
1.8nH
BT09AG
BT013
100pF
100pF
B
8pF
3. Distance between the center of the shunt cap(C6)
and the input pin of BT09AG _ 3.5mm.
39nH
BB
10pF
2. Distance between the center of the series inductor
(L2) and the input pin of BT09AG _ 2.5mm.
6.8nH
4. Distance between the center of the series cap(C7)
and the output pin of BT09AG _ 3.5mm.
5. Distance between the center of the shunt inductor
(L3) and the output pin of BT09AG _ 6.0mm.
BeRex
●website: www.berex.com
● email: [email protected]
7
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
8
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Application Circuit: 1900MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
L2
C4
C5
RFout
BT09AG
C6
C7
C1
C2
C3
C4
C5
C6
C7
L1
L2
Tolerance
100pF
1000pF
10uF
100pF
100pF
2pF
1.2pF
39nH
1.2nH
±5%
±5%
±20%
±5%
±5%
±5%
±5%
5%
2%
Note:
10uF
2. Distance between the center of the shunt cap(C6)
and the input pin of BT09AG _ 1.0mm.
1000 pF
100pF
100 pF
BT09AG
BT013
39nH
BB
100pF
100pF
B
8pF
1.2nH
1. PCB: 31mil thick FR4.
1.2pF
3. Distance between the center of the series inductor(L2) and the output pin of BT09AG _ 3.5mm.
4. Distance between the center of the shunt cap(C7)
and the output pin of BT09AG _ 7.2mm.
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
9
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. e
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
BeRex
●website: www.berex.com
● email: [email protected]
10
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Application Circuit: 2450MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
C4
C7
C5
RFout
BT09AG
C6
C8
C1
C2
C3
C4
C5
C6
C7
C8
L1
Tolerance
100pF
1000pF
10uF
100pF
100pF
1pF
2.5pF
0.5pF
39nH
±5%
±5%
±20%
±5%
±5%
±5%
±5%
±5%
5%
Note:
10uF
1000 pF
2. Distance between the center of the series cap(C7)
and the input pin of BT09AG _ 2.5mm.
100pF
100 pF
2.5pF
BT09AG
BT013
BB
100pF
B
1pF
1. PCB: 31mil thick FR4.
39nH
100pF
0.5pF
3. Distance between the center of the shunt cap(C6)
and the input pin of BT09AG _ 3.5mm.
4. Distance between the center of the shunt cap(C8)
and the output pin of BT09AG _ 9.0mm.
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
11
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
BeRex
●website: www.berex.com
● email: [email protected]
12
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Application Circuit: 3500MHz
Schematic Diagram
BOM
C1
C2
C3
+5V
L1
RFin
C7
C4
C5
RFout
BT09AG
C6
C8
Tolerance
C1
C2
C3
C4
C5
C6
100pF
1000pF
10uF
22pF
22pF
0.5pF
±5%
±5%
±20%
±5%
±5%
±5%
C7
0.5pF
±5%
C8
L1
0.5pF
33nH
±5%
±5%
Note:
1. PCB: 31mil thick FR4.
10uF
1000 pF
2. Distance between the center of the series cap(C7)
and the input pin of BT09AG _ 2.5mm.
100pF
100 pF
0.5pF
BT09AG
BT013
33nH
BB
22pF
22pF
B
0.5pF
3. Distance between the center of the shunt cap(C6)
and the input pin of BT09AG _ 9.2mm.
0.5pF
4. Distance between the center of the shunt cap(C8)
and the output pin of BT09AG _ 8.0mm.
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
13
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Typical Performance
BeRex
●website: www.berex.com
● email: [email protected]
14
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Package Outline Dimension
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
0.40
1.30
PCB Mounting
0.40
Ø0.40
0.40
0.75
1.20
2.15
1.20
0.50
0.45
1.20
1.20
2.80
1.50
1.00
0.65
0.35
Note : All dimension are in millimeters
PCB lay out _ on BeRex website
BeRex
●website: www.berex.com
● email: [email protected]
15
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E
BT09AG
5-4000 MHz Wideband Medium Power Amplifier
Package Marking
Tape & Reel
SOT89
Packaging information:
Tape Width (mm): 12
Reel Size (inches): 7
Device Cavity Pitch (mm): 8
YY = Year, WW = Working Week,
XX = Wafer No.
Devices Per Reel: 1000
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate
thin whisker growth concerns.)
MSL / ESD Rating
ESD Rating:
Class 1B
Value:
Passes <1000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114B
MSL Rating:
Level 1 at +265°C convection reflow
Standard:
JEDEC Standard J-STD-020
NATO CAGE code:
2
BeRex
N
9
6
F
●website: www.berex.com
● email: [email protected]
16
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. E