158X Series Type X2 Suppressor Capacitors

158X Series Type X2 Suppressor Capacitors
Metallized Polyester / Radial Leads
• Radial Leads
in Two Lengths
• UL and CSA Approved
• Flame Retardant Case
Meets UL94V-0
• Potting End Fill
Meets UL94V-0
• Used in applications where
damage to the capacitor will
not lead to the danger of
electrical shock
• Lead Material
Tinned Copper Clad Steel
GENERAL
SPECIFICATIONS
.
Operating Temperature:
-40 °C to +100 °C
Voltage Range:
275/250 VAC, 60 Hz
Capacitance Range:
0.01 µF to 2.2 µF
Capacitance Tolerance:
±20% (Standard)
±10% (Special)
Dissipation Factor (DF)
tgδ 0.01 Max at 1,000 ± 100kHz
RoHS Compliant
Agency Approvals
Safety Agency
UL
Standard
Insulation Resistance (IR)
(@ 500 VDC and 20 °C)
Terminal to Terminal:
≤0.33µF
15,000 MΩ min
≥0.47µF
5,000 MΩ x µF min
Both Terminals to Body:
100,000 MΩ min
Maximum Pulse Rise Time
µF
V/µs
µF
V/µs
.010
2800
0.22
1200
.022
2400
0.47
1000
.033
2400
0.68
1000
.047
2000
1.00
800
.068
2000
1.50
800
.100
1600
2.20
600
Outline Dimensions
File Number
UL-60384-14
E171988
CSA
C22 2, No. 1-98/No.8 (250VAC)
1572961
40018720
VDE
EN 60384-14
SEMKO
EN 60384-14
1112778
NEMKO
EN 60384-14
P10213462
Ratings
Inches
Catalog
Part Number
Millimeters
Cap
(µF)
L
Length
T
Thickness
H
Height
S
Spacing
Ød
L
Length
T
Thickness
H
Height
S
Spacing
158X103
0.010
0.669
0.197
0.472
Ød
0.591
0.024
17.0
5.0
12.0
15.0
0.6
158X123
0.012
0.669
0.197
158X153
0.015
0.669
0.197
0.472
0.591
0.024
17.0
5.0
12.0
15.0
0.6
0.472
0.591
0.024
17.0
5.0
12.0
15.0
158X183
0.018
0.669
0.6
0.197
0.472
0.591
0.024
17.0
5.0
12.0
15.0
158X223
0.022
0.6
0.669
0.197
0.472
0.591
0.024
17.0
5.0
12.0
15.0
158X273
0.6
0.027
0.669
0.197
0.472
0.591
0.024
17.0
5.0
12.0
15.0
0.6
158X333
0.033
0.669
0.197
0.472
0.591
0.024
17.0
5.0
12.0
15.0
0.6
158X393
0.039
0.669
0.217
0.492
0.591
0.031
17.0
5.5
12.5
15.0
0.8
158X473
0.047
0.669
0.217
0.492
0.591
0.031
17.0
5.5
12.5
15.0
0.8
158X563
0.056
0.669
0.256
0.531
0.591
0.031
17.0
6.5
13.5
15.0
0.8
158X683
0.068
0.669
0.256
0.531
0.591
0.031
17.0
6.5
13.5
15.0
0.8
158X823
0.082
0.669
0.256
0.591
0.591
0.031
17.0
6.5
15.0
15.0
0.8
158X104
0.100
0.669
0.315
0.591
0.591
0.031
17.0
8.0
15.0
15.0
0.8
158X124
0.120
0.984
0.256
0.630
0.886
0.031
25.0
6.5
16.0
22.5
0.8
158X154
0.150
0.984
0.256
0.630
0.886
0.031
25.0
6.5
16.0
22.5
0.8
158X184
0.180
0.984
0.315
0.689
0.886
0.031
25.0
8.0
17.5
22.5
0.8
158X224
0.220
0.984
0.315
0.689
0.886
0.031
25.0
8.0
17.5
22.5
0.8
158X274
0.270
1.181
0.354
0.669
1.083
0.031
30.0
9.0
17.0
27.5
0.8
158X334
0.330
0.984
0.394
0.768
0.886
0.031
25.0
10.0
19.5
22.5
0.8
158X394
0.390
1.181
0.433
0.866
1.083
0.031
30.0
11.0
22.0
27.5
0.8
158X474
0.470
1.181
0.433
0.866
1.083
0.031
30.0
11.0
22.0
27.5
0.8
158X564
0.560
1.181
0.531
0.965
1.083
0.031
30.0
13.5
24.5
27.5
0.8
158X684
0.680
1.181
0.531
0.965
1.083
0.031
30.0
13.5
24.5
27.5
0.8
158X824
0.820
1.201
0.630
1.102
1.083
0.039
30.5
16.0
28.0
27.5
1.0
158X105
1.000
1.201
0.630
1.102
1.083
0.039
30.5
16.0
28.0
27.5
1.0
158X125
1.200
1.614
0.610
1.102
1.476
0.039
41.0
15.5
28.0
37.5
1.0
158X155
1.500
1.614
0.610
1.102
1.476
0.039
41.0
15.5
28.0
37.5
1.0
158X185
1.800
1.614
0.689
1.280
1.476
0.039
41.0
17.5
32.5
37.5
1.0
158X225
2.200
1.614
0.689
1.280
1.476
0.039
41.0
17.5
32.5
37.5
1.0
NOTE: If ±10% tolerance is required, add 'K' to end of Catalog Number
NOTE: Parts are normally supplied with leads 30mm minimum
To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
158X Series Type X2 Suppressor Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com