Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors Type 425M Orange Drop® Metallized Polyester Film Capacitors Features • Radial-lead • Pressed profile • Non-inductively wound • Compact size • Self-healing properties Specifications Capacitance Range: 012 to 12.0 µF Capacitance Tolerance: ±5%, ±10% Voltage Ratings: 100 to 630 Volts D-C 63 to 250 Volts A-C Operating Temperature Range: -55°C to +85°C (at full voltage) Voltage Derating: At +105°C, 70% of +85°C rating. At +125°C, 50% of +85°C rating Pulse Rise Time (dV/dt): See standard ratings table dV/dt rating is in Volts/µsec. Insulation Resistance: At +25°C: 10,000 M for C ⭐ 1.0 µF 10,000 M -µF for C > 1.0 µF At +85°C 1,000 M for C ⭐ 1.0 µF 1,000 M -µF for C > l 0 µF Dissipation Factor: 1 0% Maximum @ 1 KHz, +25°C Encapsulation: Conformal coating of orange, flame retardant epoxy. Meets UL94V-0 specifications. Lead Wire: Tinned copper-clad steel, .032 (0.8) diameter, #20 AWG. Dielectric/Construction: Metallized Polyester film, single section design Non-inductively wound. Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors Ordering/Part Number Information 425M 105 9 2 J B 3 (XXXX) A suffix may be added by the factory to denote special construction. Lead Length 1 = 0.187 (4.7) ± 0.030 (0.8) 2 = 0.250 (6.4) ± 0.030 (0.8) 3 = 1.250 (32) Minimum Custom lead lengths available upon request. Terminal A = Straight Lead B,F = Hairpin Crimp G = Hockey Stick Crimp Case Code See Standard Sizes/Ratings Table D-C Voltage Rating 1 = 100 VDC 2 = 250 VDC 4 = 400 VDC 6 = 630 VDC Capacitance Tolerance 9 = ±10%; 5 = ±5% Capacitance Expressed in Picofarads. The first two digits are the significant figures, the third is the number of zeros following. (i.e. 105 = 1000000 pF = 1.0 µF) CDE Type Number Identifies the basic capacitor design. Standard Marking Format Sample Marking on unit CDE425M250V 105K 9910 Description CDE 425M 250V 105K 9910 - CDE Electronics identification Type number D-C Voltage rating, Volts Capacitance and tolerance code Weekly date code (i.e. 10th week of 1999) Tolerance codes per EIA Standards J K ±5% ±10% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors Standard Lead Styles TERMINAL B,F TERMINAL A TERMINAL G Standard Lead Spacings CASE CODE N J R L Term. A 0.394 (10.0) 0.590 (15.0) 0.886 (22.5) 1.083 (27.5) Term. B 0.394 (10.0) 0.590 (15.0) 0.886 (22.5) 1.083 (27.5) Term. F 0.295 (7.5) 0.394 (10.0) 0.590 (15.0) 0.886 (22.5) Term. G 0.197 (5.0) 0.295 (7.5) 0.394 (10.0) 0.590 (15.0) CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors Type 425M Standard Sizes/Ratings Value (µF) Part Number1 L MAX T MAX dV/dt Value 1 H WAX Volts/µsec (µF) Part Number L MAX 425M33491N 425M39491N 425M43491N 425M47491N 425M50491N 425M56491N 425M62491N 425M68491N 425M75491N 425M82491N 425M90491N 425M10591N .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.0 3.3 425M12591J 425M15591J 425M18591J 425M20591J 425M22591J 425M25591J 425M27591J 425M30591J 425M33591J .73 .73 .73 .73 .73 .73 .73 .73 .73 3.6 3.9 4.3 4.7 5.0 5.6 6.0 6.2 6.8 7.0 7.5 8.0 8.2 10.0 11.0 12.0 425M36591R 425M39591R 425M43591R 425M47591R 425M50591R 425M56591R 425M60591R 425M62591R 425M68591R 425M70591R 425M75591R 425M80591R 425M82591R 425M10691R 425M11691R 425M12691R 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) (18.5) (18.5) (18.5) (18.5) (18.5) (18.5) (18.5) (18.5) (18.5) 0.27 0.3 0.33 425M12492N 425M15492N 425M18492N 425M22492N 425M25492N 425M27492N 425M30492N 425M33492N .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) 0.39 0.43 0.47 0.5 0.56 0.62 0.68 0.75 0.82 0.9 1.0 1.2 1.5 425M39492J 425M43492J 425M47492J 425M50492J 425M56492J 425M62492J 425M68492J 425M75492J 425M82492J 425M90492J 425M10592J 425M12592J 425M15592J 1.8 2.0 2.2 2.5 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.0 5.6 6.0 6.2 .38 (9.7) .42 (10.7) .45 (11.4) .46 (11.7) .46 (11.7) .48 (12.2) .49 (12.4) .50 (12.7) .52 (13.2) .57 (14.5) .58 (14.7) .60 (15.2) 38 46 50 54 56 0.12 0.15 0.18 0.22 60 31 34 36 37 .38 (9.7) .40 (10.2) .42 (10.7) .53 (13.5) .56 (14.2) .58 (14.7) .60 (15.2) .62 (15.7) .64 (16.3) .65 (16.5) .67 (17.0) .69 (17.5) 39 40 41 .34 (8.6) .33 (8.4) .35 (8.9) .36 (9.1) .37 (9.4) .40 (10.2) .41 (10.4) .42 (10.7) .44 (11.2) .45 (11.4) .46 (11.7) .48 (12.2) .48 (12.2) .54 (13.7) .57 (14.5) .59 (15.0) .61 (15.5) .67 (17.0) .68 (17.3) .70 (17.8) .71 (18.0) .73 (18.5) .75 (19.1) .76 (19.3) .78 (19.8) .78 (19.8) .80 (20.3) .82 (20.8) .82 (20.8) .88 (22.4) .91 (23.1) .93 (23.6) 22 23 23 23 24 24 24 24 25 25 25 25 25 26 26 26 .24 .24 .24 .25 (6.1) (6.1) (6.1) (6.4) .26 (6.6) .27 .28 .29 .31 .30 .31 .33 (6.9) (7.1) (7.4) (7.9) (7.6) (7.9) (8.4) .26 .29 .31 .33 .34 .37 (6.6) (7.4) (7.9) (8.4) (8.6) (9.4) H MAX Volts/µsec 250 VDC / 160 VAC* 100 VDC / 63 VAC* 0.33 0.39 0.43 0.47 0.5 0.56 0.62 0.68 0.75 0.82 0.9 1.0 dV/dt T MAX 63 65 68 70 72 74 38 39 0.25 .37 (9.4) .41 (10.4) .45 (11.4) .47 (11.9) .49 (12.4) .50 (12.7) .51 (13.0) .52 (13.2) 59 77 89 100 107 110 114 118 .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .50 (12.7) .51 (13.0) .52 (13.2) .53 (13.5) .54 (13.7) .56 (14.2) .57 (14.5) .58 (14.7) .60 (15.2) .61 (15.5) .34 (8.6) .63 (16.0) .36 (9.1) .39 (9.9) .67 (17.0) .42 (10.7) .75 (19.1) 47 50 52 53 56 58 59 61 62 63 65 67 68 425M18592R 425M20592R 425M22592R 425M25592R 425M27592R 425M30592R 425M33592R 425M36592R 425M39592R 425M43592R 425M47592R 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) .35 (8.9) .37 (9.4) .69 (17.5) .71 (18.0) .72 (18.3) .75 (19.1) .77 (19.6) .79 (20.1) .82 (20.8) .84 (21.3) .86 (21.8) .89 (22.6) .96 (24.4) 39 39 40 425M50592L 425M56592L 425M60592L 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) .50 .53 .55 .56 .90 (22.9) .94 (23.9) .96 (24.4) 33 34 34 34 425M62592L .23 (5.8) .24 (6.1) .24 (6.1) .26 (6.6) .28 (7.1) .29 (7.4) .30 (7.6) .32 (8.1) .23 (5.8) .24 (6.1) .25 (6.4) .26 (6.6) .27 (6.9) .29 (7.4) .30 (7.6) .31 (7.9) .33 (8.4) .39 (9.9) .41 (10.4) .43 (10.9) .45 (11.4) .48 (12.2) .50 (12.7) .52 (13.2) .55 (14.0) .55 (14.0) (12.7) (13.5) (14.0) (14.2) .97 (24.6) 41 41 41 42 42 42 43 43 * 60 Hz., RMS 1 To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors Type 425M Standard Sizes/Ratings Value (µF) dV/dt Part Number1 L MAX T MAX H MAX Volts/µsec Value (µF) Part Number1 L MAX 425M68394N 425M70394N 425M75394N 425M82394N 425M10494N .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .23 (5.8) .23 (5.8) .22 (5.6) .23 (5.8) .24 (6.1) .24 (6.1) .25 (6.4) .26 (6.6) .28 (7.1) .37 (9.4) .38 (9.7) .43 (10.9) .44 (11.2) .45 (11.4) .45 (11.4) .46 (11.7) .47 (11.9) .49 (12.4) 112 122 137 149 160 163 170 0.12 0.15 0.18 0.22 0.25 0.27 425M12494J 425M15494J 425M18494J 425M22494J 425M25494J 425M27494J .73 .73 .73 .73 .73 .73 (18.5) (18.5) (18.5) (18.5) (18.5) (18.5) .22 (5.6) .22 (5.6) .24 (6.1) .42 (10.7) .49 (12.4) .51 (13.0) .53 (13.5) .55 (14.0) .56 (14.2) 59 0.3 425M30494J 425M33494J .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .30 (7.6) .30 (7.6) .35 (8.9) .37 (9.4) .57 (14.5) .63 (16.0) .66 (16.8) .68 (17.3) .69 (17.5) .70 (17.8) 96 98 102 104 105 106 1.03 1.03 1.03 1.03 (26.2) (26.2) (26.2) (26.2) .29 .31 .32 .34 (7.4) (7.9) (8.1) (8.6) .63 (16.0) .64 (16.3) .66 (16.8) .67 (17.0) 56 57 58 59 1.03 1.03 1.03 1.03 (26.2) (26.2) (26.2) (26.2) .35 .37 .39 .43 (8.9) (9.4) (9.9) (10.9) .69 .71 .73 .77 (17.5) (18.0) (18.5) (19.6) 60 61 62 .76 .81 .87 .90 (19.3) (20.6) (22.1) (22.9) 49 0.33 0.39 425M47394N 425M50394N 425M56394N 425M62394N 425M39494J 0.43 0.47 0.5 425M43494J 425M47494J 425M50494J 0.56 0.62 0.68 0.75 425M56494R 425M62494R 0.82 0.9 1.0 1.2 425M82494R 425M90494R 425M10594R 1.5 1.8 2.0 425M15594L 425M18594L 425M20594L 425M22594L 425M25594L 425M27594L 2.2 2.5 2.7 3.0 425M68494R 425M75494R 425M12594R 425M30594L 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) 1.23 (31.2) .26 (6.6) .28 (7.1) .29 (7.4) .32 (8.1) .34 (8.6) .42 (10.7) .47 (11.9) .47 (11.9) .49 (12.4) .53 (13.5) .55 (14.0) .58 (14.7) H MAX Volts/µsec 630 VDC / 250 VAC* 400 VDC / 200 VAC* 0.047 0.05 0.056 0.062 0.068 0.07 0.075 0.082 0.1 dV/dt T MAX .93 (23.6) .96 (24.4) .99 (25.1) 178 195 72 80 87 91 93 63 50 50 51 51 51 52 0.012 0.015 0.018 0.022 0.025 0.027 0.03 0.033 0.039 0.043 0.047 0.05 0.056 0.062 0.068 0.07 0.075 425M12396N 425M15396N 425M18396N 425M22396N 425M25396N 425M27396N 425M30396N 425M33396N 425M39396N 425M43396N 425M47396N 425M50396N 425M56396J 425M62396J 425M68396J 425M70396J 0.082 425M75396J 425M82396J 0.1 425M10496J 0.12 0.15 0.18 0.22 0.25 425M12496J 425M15496J 425M18496J 425M22496J 0.27 0.3 0.33 425M27496R 0.39 0.43 425M39496R 425M43496R 0.47 0.5 0.56 0.62 425M47496R 425M25496J 425M30496R 425M33496R 0.68 425M50496R 425M56496R 425M62496R 425M68496R 0.75 425M75496R 0.82 0.9 1.0 425M82496L 425M90496L 425M10596L .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .52 (13.2) .23 (5.8) .25 (6.4) .24 (6.1) .26 (6.6) .27 (6.9) .28 (7.1) .29 (7.4) .31 (7.9) .31 (7.9) .32 (8.1) .34 (8.6) .35 (8.9) .35 (8.9) .37 (9.4) .44 (11.2) .46 (11.7) .48 (12.2) .49 (12.4) .50 (12.7) .51 (13.0) .58 (14.7) .59 (15.0) .61 (15.5) .62 (15.7) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .73 (18.5) .26 (6.6) .27 (6.9) .28 (7.1) .28 (7.1) .29 (7.4) .30 (7.6) .31 (7.9) .34 (8.6) .35 (8.9) .39 (9.9) .43 (10.9) .46 (11.7) .46 (11.7) .47 (11.9) .48 (12.2) .49 (12.4) .50 (12.7) .51 (13.0) .58 (14.7) .61 (15.5) .69 (17.5) .72 (18.3) .77 (19.6) .80 (20.3) 124 132 138 140 144 149 159 166 174 179 183 186 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) .35 (8.9) .37 (9.4) .39 (9.9) .42 (10.7) .44 (11.2) .46 (11.7) .48 (12.2) .51 (13.0) .54 (13.7) .56 (14.2) .59 (15.0) .69 (17.5) .71 (18.0) .72 (18.3) .76 (19.3) .78 (19.8) .80 (20.3) .82 (20.8) .85 (21.6) .88 (22.4) .91 (23.1) .94 (23.9) 94 96 98 100 101 102 102 103 104 105 105 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.03 (26.2) 1.23 (31.2) .54 (13.7) .88 (22.4) 1.23 (31.2) .57 (14.5) .91 (23.1) 1.23 (31.2) .60 (15.2) .94 (23.9) 160 233 277 321 345 358 375 388 408 419 428 434 80 81 81 * 60 Hz., RMS 1 To complete part number for specific tolerance, terminal style and lead length please refer to Ordering/Part Number Information page. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 Type 425M, Orange Drop®, Metallized Polyester Film/Foil Capacitors General Specifications The Type 425M Orange Drop® is designed and manufactured for operation in a wide range of demanding environments and applications. Type 425M capacitors are wound from the most reliable metallized polyester film available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125°C with proper derating. The 425M series is an ideal choice for a variety of commercial and industrial electronic applications, from power supplies and instrumentation to amplifiers and lighting ballasts. The 425M series is constructed of the highest quality polyester film with a vacuum deposited metal electrode. Metallized film offers specific clearing/ self-healing characteristics that remove a fault or short in the dielectric film by vaporizing the metal electrode surrounding the defect and isolating the area. Operating Temperature Range: Humidity Testing: The standard operating temperature range for polyester film is -55°C to +85°C. The 425M may be operated at full voltage within this temperature range. Units subjected to 95% relative humidity for 72 hours with no voltage applied at +75°C. After 4 hours of drying minimum product of insulation resistance and capacitance shall be 5,000 M -µF, but need not exceed 5000 M . The 425M may be operated up to +105°C provided the DC working voltage is reduced to 70% of the +85°C rating (full rating), and up to +125°C with a 50% reduction from the +85°C rating (full rating). For more specific details regarding operation above +85°C please contact our application engineering department. The maximum operating temperature for the 425M series is +125°C. Dielectric Withstanding Voltage: DC Voltage Life Test: 500 hours at +85°C at 125% of rated voltage. After test; capacitance shall not have changed by more than ±5% of initial value, insulation resistance shall not have decreased by more than 50% of initial value and dissipation factor shall not have increased to more than 1.0%. In addition, there should be no open or short circuits, and no sign of visible damage. Typical Temperature Characteristics: Units shall withstand a DC potential of 150% of rated voltage applied between terminals for not more than 2 minutes. AC Voltage Applications: The A-C component of the 425M's voltage rating has been specified to assure that corona will not be encountered when the capacitor is operated within the noted specifications. We encourage you to contact us if you have any concerns about operating voltage, temperature limits, etc. Lead Bend Test: After 3 consecutive 180° bends. No damage. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 AC Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4