Type 325/326, –55 ºC to 125 ºC Long-Life, Switching Power Grade Radial High Temperature and Ultra-Low ESR The Types 325 and 326 are the ultra-wide-temperature, low-ESR capacitors for switching power-supply outputs and automotive applications. The 125 °C capability and exceptionally low ESRs enable high ripplecurrent capability. With series inductance of 12 to 16 nH and ripple currents to 27 amps one of these capacitors can save by replacing eight to ten of the 12.5 mm diameter capacitors routinely at the output of switching power supplies. Type 325 has three leads for rugged, reverse-proof mounting, and Type 326 has two leads. Highlights Type 325 Type 326 • • • • • 2000 hour life test at 125 °C Ripple Current to 27 amps ESRs to 5 mΩ > 90% capacitance at –40 °C Replaces multiple capacitors RoHS Compliant Specifications Operating Temperature: Rated Voltage: Capacitance: Capacitance Tolerance: Leakage Current: Cold Impedance: Ripple Current Multipliers: –55 °C to 125 °C 6.3 to 63 Vdc – 880 µF to 46,000 µF –10 +75% ≤0.5 √CV µA, 4 mA max, 5 minutes –55 °C multiple of 25 °C Z ≤2.5 @ 120 Hz ≤20 from 20–100 kHz Ambient Temperature 45ºC 55ºC 65ºC 75ºC 85ºC 95ºC 105ºC 1.39 1.3 1.21 1.11 1.00 0.88 0.73 Frequency 115ºC 125ºC 0.55 0.26 120 Hz 360 Hz 400 Hz 1 kHz 20-100 kHz see ratings 0.76 0.77 0.85 1.00 Life Test: Outline Drawings L 2000 h with rated voltage at 125 °C ∆ capacitance ± 10% ESR 125 % of limit DCL 100 % of limit Load Life: 4000 h at full load at 85 °C ∆ capacitance ± 10% ESR 200 % of limit DCL 100 % of limit Shelf Life: 500 h at 105 °C, ∆ capacitance ± 10%, ESR 110% of limit, DCL 200% of limit Vibration: 10 to 55 Hz, 0.06” and 10 g max, 2 h each plane .250 +0.015 -0.032 L CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 325/326,–55 ºC to 125 ºC Long-Life, Switching Power Grade Radial Insulated Bare Can Epoxy D ± 0.015 (0.4 mm) D ± 0.015 (0.4 mm) Case endseal L Code L ± 0.062 (1.6 mm) L ± 0.030 (0.8 mm) Max DxL DxL Lead Spacing Type 325 S1 Lead Diameter Type 326 T dia. AWG S2 ±0.020(0.5 mm) ±0.020(0.5 mm) Case Dimensions in Inches GE .765 x 1.150 1.212 0.750 x 1.125 0.200 0.300 0.300 0.040 18 GJ .765 x 1.650 1.712 0.750 x 1.625 0.200 0.300 0.300 0.040 18 GL .765 x 2.150 2.212 0.750 x 2.125 0.200 0.300 0.300 0.040 18 GP .765 x 2.650 2.712 0.750 x 2.625 0.200 0.300 0.300 0.040 18 GS .765 x 3.150 3.212 0.750 x 3.125 0.200 0.300 0.300 0.040 18 GT .765 x 3.650 3.712 0.750 x 3.625 0.200 0.300 0.300 0.040 18 HE .890 x 1.150 1.212 0.875 x 1.125 0.300 0.400 0.300 0.040 18 HJ .890 x 1.650 1.712 0.875 x 1.625 0.300 0.400 0.300 0.040 18 HL .890 x 2.150 2.212 0.875 x 2.125 0.300 0.400 0.300 0.040 18 HP .890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18 HS .890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18 HT .890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18 JE 1.015 x 1.150 1.212 1.000 x 1.125 0.300 0.400 0.400 0.040 18 JJ 1.015 x 1.650 1.712 1.000 x 1.625 0.300 0.400 0.400 0.040 18 JL 1.015 x 2.150 2.212 1.000 x 2.125 0.300 0.400 0.400 0.040 18 JP 1.015 x 2.650 2.712 1.000 x 2.625 0.300 0.400 0.400 0.040 18 JS 1.015 x 3.150 3.212 1.000 x 3.125 0.300 0.400 0.400 0.040 18 JT 1.015 x 3.650 3.712 1.000 x 3.625 0.300 0.400 0.400 0.040 18 18 Case Dimensions in Millimeters GE 19.4 x 29.2 30.8 19.1 x 28.6 5.08 7.62 7.62 1.02 GJ 19.4 x 41.9 43.5 19.1 x 41.3 5.08 7.62 7.62 1.02 18 GL 19.4 x 54.6 56.2 19.1 x 54.0 5.08 7.62 7.62 1.02 18 GP 19.4 x 67.3 68.9 19.1 x 66.7 5.08 7.62 7.62 1.02 18 GS 19.4 x 80.0 81.6 19.1 x 79.4 5.08 7.62 7.62 1.02 18 GT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18 HE 22.6 x 29.2 30.8 22.2 x 28.6 7.62 10.16 7.62 1.02 18 HJ 22.6 x 41.9 43.5 22.2 x 41.3 7.62 10.16 7.62 1.02 18 HL 22.6 x 54.6 56.2 22.2 x 54.0 7.62 10.16 7.62 1.02 18 HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18 HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18 HT 22.6 x 92.7 94.3 22.2 x 92.1 7.62 10.16 7.62 1.02 18 JE 25.8 x 29.2 30.8 25.4 x 28.6 7.62 10.16 10.16 1.02 18 JJ 25.8 x 41.9 43.5 25.4 x 41.3 7.62 10.16 10.16 1.02 18 HL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18 18 JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18 JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18 Part Numbering System 325 Type 393 Capacitance 325 - 3 leads 152=1500 µF 326 - 2 leads 393=39000 µF 326A - 3 leads, laydown U Tolerance M = 20% T = 10% + 50% U = 10% + 75% 6R3 JS Voltage Case Code 6R3=6.3 V 035=35 V See Ratings 1 Insulation 0 = bare can 1 = polyester E Epoxy (blank) =no epoxy E = Epoxy endseal CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 325/326, –55 ºC to 125 ºC Long-Life, Switching Power Grade Radial Typical Performance Curves CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 325/326,–55 ºC to 125 ºC Long-Life, Switching Power Grade Radial Ratings Cap. (µF) Catalog Part Number ESR MAX @ 25°C 120 Hz 20 kHz (mΏ) Ripple MAX @ 85ºC 120 Hz 20 kHz (A) Nom Size Insulated DXL (in) 6.3 Vdc (8 Vdc Surge) Cap. (µF) Catalog Part Number ESR MAX @ 25°C 120 Hz 20 kHz (mΏ) Ripple MAX @ 85ºC 120 Hz 20 kHz (A) Nom Size Insulated DXL (in) 8400 325842U016HL1 22.1 11.0 9.61 13.60 0.89 X 2.15 4400 325442U6R3GE1 65.7 36.2 3.95 5.31 0.77 X 1.15 9600 325962U016GT1 24.8 10.1 10.41 16.28 0.77 X 3.65 5800 325582U6R3HE1 42.8 26.0 5.37 6.89 0.89 X 1.15 11000 325113U016HP1 17.2 8.6 11.87 16.81 0.89 X 2.65 7100 325712U6R3GJ1 41.9 23.5 5.68 7.59 0.77 X 1.65 12000 325123U016JL1 17.2 8.7 11.74 16.51 1.02 X 2.15 7700 325772U6R3JE1 28.5 17.2 7.16 9.22 1.02 X 1.15 14000 325143U016HS1 14.3 7.4 14.05 19.48 0.89 X 3.15 11000 325113U6R3GL1 29.5 16.2 7.56 10.21 0.77 X 2.15 15000 325153U016JP1 13.3 7.3 14.55 19.61 1.02 X 2.65 12000 325123U6R3HJ1 26.5 14.7 7.81 10.51 0.89 X 1.65 17000 325173U016HT1 14.9 6.2 14.59 22.60 0.89 X 3.65 14000 325143U6R3GP1 20.9 13.6 9.85 12.21 0.77 X 2.65 19000 325193U016JS1 11.4 6.3 16.92 22.89 1.02 X 3.15 15000 325153U6R3JJ1 16.2 11.1 10.88 13.13 1.02 X 1.65 23000 325233U016JT1 9.5 5.2 19.82 26.70 1.02 X 3.65 25 Vdc (32 Vdc Surge) 17000 325173U6R3HL1 18.7 11.0 10.46 13.60 0.89 X 2.15 18000 325183U6R3GS1 18.1 11.6 11.42 14.23 0.77 X 3.15 1300 325132U025GE1 109.0 35.0 3.07 5.41 0.77 X 1.15 21000 325213U6R3GT1 16.5 10.6 12.75 15.94 0.77 X 3.65 1800 325182U025HE1 70.8 26.0 4.17 6.89 0.89 X 1.15 23000 325233U6R3HP1 14.3 8.6 13.02 16.81 0.89 X 2.65 2100 325212U025GJ1 55.1 23.5 4.96 7.59 0.77 X 1.65 23000 325233U6R3JL1 14.3 8.7 12.86 16.51 1.02 X 2.15 2500 325252U025JE1 52.5 17.2 5.27 9.22 1.02 X 1.15 29000 325293U6R3HS1 10.5 7.4 16.40 19.48 0.89 X 3.15 3100 325312U025GL1 38.0 16.2 6.66 10.21 0.77 X 2.15 31000 325313U6R3JP1 10.5 7.3 16.40 19.61 1.02 X 2.65 3600 325362U025HJ1 35.0 14.7 6.80 10.51 0.89 X 1.65 35000 325353U6R3HT1 10.1 6.2 17.75 22.70 0.89 X 3.65 4100 325412U025GP1 28.6 13.6 8.42 12.21 0.77 X 2.65 39000 325393U6R3JS1 9.5 6.3 18.55 22.89 1.02 X 3.15 4900 325492U025JJ1 26.6 11.1 8.49 13.13 1.02 X 1.65 46000 325463U6R3JT1 8.3 5.2 21.23 26.70 1.02 X 3.65 5100 325512U025GS1 24.8 11.6 9.76 14.23 0.77 X 3.15 5400 325542U025HL1 24.0 11.0 9.22 13.60 0.89 X 2.15 10 Vdc (13 Vdc Surge) 3300 325332U010GE1 75.5 36.2 3.68 5.31 0.77 X 1.15 6200 325622U025GT1 24.8 10.1 10.41 16.28 0.77 X 3.65 4700 325472U010HE1 42.8 26.0 5.37 6.89 0.89 X 1.15 7200 325722U025HP1 19.1 8.6 11.26 16.81 0.89 X 2.65 5400 325542U010GJ1 42.7 23.5 5.63 7.59 0.77 X 1.65 7400 325742U025JL1 19.1 8.7 11.13 16.51 1.02 X 2.15 6400 325642U010JE1 36.7 17.2 6.30 9.22 1.02 X 1.15 8900 325892U025HS1 15.2 7.4 13.60 19.48 0.89 X 3.15 8000 325802U010GL1 31.4 16.2 7.33 10.21 0.77 X 2.15 9800 325982U025JP1 15.3 7.3 13.60 19.61 1.02 X 2.65 9300 325932U010HJ1 25.7 14.7 7.95 10.51 0.89 X 1.65 11000 325113U025HT1 14.9 6.2 14.59 22.60 0.89 X 3.65 11000 325113U010GP1 20.9 13.6 9.85 12.21 0.77 X 2.65 12000 325123U025JS1 12.4 6.3 16.27 22.89 1.02 X 3.15 15000 325153U025JT1 9.5 5.2 19.82 26.7 1.02 X 3.65 0.77 X 1.15 13000 325133U010GS1 19 11.6 11.13 14.23 0.77 X 3.15 13000 325133U010JJ1 22.9 11.1 9.16 13.13 1.02 X 1.65 14000 325143U010HL1 17.3 11.0 10.86 13.60 0.89 X 2.15 16000 325163U010GT1 17 10.4 12.57 16.08 19000 325193U010HP1 14.2 8.6 13.04 16.81 19000 325193U010JL1 16.2 8.7 12.10 16.51 23000 325233U010HS1 11.4 7.4 15.73 19.48 0.89 X 3.15 2200 325222U035HJ1 42.8 14.7 6.15 10.51 0.89 X 1.65 26000 325263U010JP1 11.4 7.3 15.73 19.61 1.02 X 2.65 2200 325222U035GL1 45.7 16.2 6.08 10.21 0.77 X 2.15 28000 325283U010HT1 10.1 6.2 17.75 22.70 0.89 X 3.6 3000 325302U035GP1 35.2 13.6 7.59 12.21 0.77 X 2.65 32000 325323U010JS1 10.5 6.3 17.69 22.89 1.02 X 3.15 3300 325332U035HL1 29.7 11.0 8.28 13.60 0.89 X 2.15 38000 325383U010JT1 8.7 5.2 20.67 26.70 1.02 X 3.65 3400 325342U035JJ1 32.4 11.1 7.70 13.13 1.02 X 1.65 3700 325372U035GS1 28.6 11.6 9.09 14.23 0.77 X 3.15 35 Vdc (44 Vdc Surge) 880 325881U035GE1 124.0 35.0 2.88 5.41 0.77 X 3.65 1100 325112U035HE1 85.6 26.0 3.79 6.89 0.89 X 1.15 0.89 X 2.65 1500 325152U035GJ1 66.6 23.5 4.51 7.59 0.77 X 1.65 1.02 X 2.15 1700 325172U035JE1 63.8 17.2 4.78 9.22 1.02 X 1.15 16 Vdc (20 Vdc Surge) 2000 325202U016GE1 92.6 35.0 3.33 5.41 0.77 X 1.15 4300 325432U035GT1 24.8 10.1 10.41 16.28 0.77 X 3.65 2800 325282U016HE1 63.8 26.0 4.40 6.89 0.89 X 1.15 4400 325442U035HP1 22.9 8.6 10.28 16.81 0.89 X 2.65 3200 325322U016GJ1 50.4 23.5 5.18 7.59 0.77 X 1.65 5100 325512U035JL1 21.9 8.7 10.39 16.51 1.02 X 2.15 3800 325382U016JE1 48.6 17.2 5.48 9.22 1.02 X 1.15 5500 325552U035HS1 18.1 7.4 12.47 19.48 0.89 X 3.15 4800 325482U016GL1 35.3 16.2 6.92 10.21 0.77 X 2.15 6300 325632U035HT1 14.9 6.2 14.59 22.60 0.89 X 3.65 5600 325562U016HJ1 32.2 14.7 7.09 10.51 0.89 X 1.65 6800 325682U035JP1 17.1 7.3 12.83 19.61 1.02 X 2.65 6400 325642U016GP1 26.6 13.6 8.73 12.21 0.77 X 2.65 8500 325852U035JS1 14.3 6.3 15.15 22.89 1.02 X 3.15 7700 325772U016JJ1 24.8 11.1 8.79 13.13 1.02 X 1.65 10000 325103U035JT1 12.4 5.2 17.37 26.70 1.02 X 3.65 8000 325802U016GS1 22.8 11.6 10.17 14.23 0.77 X 3.15 CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com Type 325/326, –55 ºC to 125 ºC Long-Life, Switching Power Grade Radial Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com