Types CD17, CD18 & CDV18, High-Frequency, Mica Capacitors High-Frequency Capacitors for CATV and RF Applications Types CD17 and CD18 assure controlled, resonancefree performance through 1 GHz. Insertion loss data is typically flat within ±0.1 dB over the entire frequency range, and is specified to be flat within ±0.2 dB. Interchangeable with the most popular, common mica capacitors, Type CD17 is available in the same case sizes and lead spacing as CD15; CD18, in the same case sizes and lead spacing as CD19, and CDV18, in the same as CDV19. Highlights H Max. Measured at point where phenolic cone becomes a cylinder S ±.031. .078. Max. no solder 1. Min. Specifications Voltage Range: Capacitance Range: Capacitance Tolerance: Temperature Range: • Shockproof and delamination free • Near zero capacitance change with (t), (V) and (f ) • Very high Q at UHF/VHF frequencies • 0.0005 typical dissipation factor • 100,000 V/μs dV/dt capability minimum • Low, notch-free impedance to beyond 1 GHz • Ultra low ESR for cool operation 100 Vdc to 1,000 Vdc 1 pF to 5,100 pF ±1⁄2 pF (D), ±1 pF (C), ±1⁄2% (E), ±1% (F), ±2% (G), ±5% (J) –55 °C to +150 °C Typical Perfomance Curves RoHS-5 Compliant Has more than 1000 ppm lead in some homogenous material but otherwise complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com Types CD17, CD18 & CDV18, High-Frequency, Mica Capacitors Ratings Cap. (pF) 1 2 3 4 5 6 7 8 9 10 12 15 18 20 22 24 27 27 30 30 33 33 36 36 39 39 43 43 47 47 50 50 51 51 56 56 62 62 68 68 75 75 82 82 91 91 100 100 110 110 120 120 130 130 150 150 160 160 180 180 200 200 220 220 240 240 250 Catalog Part Number CD17CD010DO3F CD17CD020DO3F CD17CD030DO3F CD17CD040DO3F CD17CD050DO3F CD17CD060DO3F CD17CD070DO3F CD17CD080DO3F CD17CD090DO3F CD17CD100JO3F CD17CD120JO3F CD17CD150JO3F CD17CD180JO3F CD17ED200JO3F CD17ED220JO3F CD17ED240JO3F CD17ED270JO3F CDV18EF270JO3F CD17ED300JO3F CDV18EF300JO3F CD17ED330JO3F CDV18EF330JO3F CD17ED360JO3F CDV18EF360JO3F CD17ED390JO3F CDV18EF390JO3F CD17ED430JO3F CDV18EF430JO3F CD17ED470JO3F CDV18EF470JO3F CD17ED500JO3F CDV18EF500JO3F CD17ED510JO3F CDV18EF510JO3F CD17ED560JO3F CDV18EF560JO3F CD17ED620JO3F CDV18EF620JO3F CD17ED680JO3F CDV18EF680JO3F CD17ED750JO3F CDV18EF750JO3F CD17ED820JO3F CDV18EF820JO3F CD17FD910JO3F CDV18FF910JO3F CD17FD101JO3F CDV18FF101JO3F CD17FD111JO3F CDV18FF111JO3F CD17FD121JO3F CDV18FF121JO3F CD17FD131JO3F CDV18FF131JO3F CD17FD151JO3F CDV18FF151JO3F CD17FD161JO3F CDV18FF161JO3F CD17FD181JO3F CDV18FF181JO3F CD17FD201JO3F CDV18FF201JO3F CD17FD221JO3F CDV18FF221JO3F CD17FD241JO3F CDV18FF241JO3F CD17FD251JO3F Volt Rate 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 1000 500 L H T S in (mm) in (mm) in (mm) in (mm) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .170 (4.3) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .450 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.4) .360 ( 9.1) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.4) .370 ( 9.4) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .370 ( 9.4) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .370 ( 9.4) .180 (4.6) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .370 ( 9.4) .190 (4.8) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .380 ( 9.7) .190 (4.8) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .380 ( 9.7) .200 (5.1) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .460 (11.7) .380 ( 9.7) .200 (5.1) .234 (5.9) .640 (16.3) .500 (12.7) .190 (4.8) .344 (8.7) .470 (11.9) .390 ( 9.9) .210 (5.3) .234 (5.9) D in (mm) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) Cap. (pF) 270 270 270 300 300 300 330 330 330 360 360 360 390 390 390 430 430 430 470 470 470 500 500 510 510 510 560 560 560 620 620 620 680 680 680 750 750 750 820 820 820 910 910 1000 1000 1100 1100 1200 1200 1300 1500 1500 1600 1800 2000 2200 2400 2500 2700 3000 3300 3600 3900 4300 4700 5000 5100 Catalog Part Number CD17FD271JO3F CD18FD271JO3F CDV18FF271JO3F CD17FD301JO3F CD18FD301JO3F CDV18FF301JO3F CD17FD331JO3F CD18FD331JO3F CDV18FF331JO3F CD17FD361JO3F CD18FD361JO3F CDV18FF361JO3F CD17FD391JO3F CD18FD391JO3F CDV18FF391JO3F CD17FD431JO3F CD18FD431JO3F CDV18FF431JO3F CD17FD471JO3F CD18FD471JO3F CDV18FF471JO3F CD17FD501JO3F CD18FD501JO3F CD17FD511JO3F CD18FD511JO3F CDV18FF511J03F CD17FC561JO3F CD18FD561JO3F CDV18FF561JO3F CD17FC621JO3F CD18FD621JO3F CDV18FF621JO3F CD17FC681JO3F CD18FD681JO3F CDV18FF681JO3F CD17FC751JO3F CD18FD751JO3F CDV18FF751JO3F CD17FC821JO3F CD18FD821JO3F CDV18FF821JO3F CD17FA911JO3F CD18FD911JO3F CD17FA102JO3F CD18FD102JO3F CD17FA112JO3F CD18FD112JO3F CD17FA122JO3F CD18FD122JO3F CD18FD132JO3F CD17FA152JO3F CD18FD152JO3F CD18FD162JO3F CD18FD182JO3F CD18FD202JO3F CD18FD222JO3F CD18FD242JO3F CD18FD252JO3F CD18FD272JO3F CD18FD302JO3F CD18FD332JO3F CD18FD362JO3F CD18FD392JO3F CD18FD432JO3F CD18FD472JO3F CD18FD502JO3F CD18FD512JO3F Volt Rate 500 500 1000 500 500 1000 500 500 1000 500 500 1000 500 500 1000 500 500 1000 500 500 1000 500 500 500 500 1000 300 500 1000 300 500 1000 300 500 1000 300 500 1000 300 500 1000 100 500 100 500 100 500 100 500 500 100 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 L in (mm) .470 (11.9) .640 (16.3) .640 (16.3) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .650 (16.5) .470 (11.9) .640 (16.3) .470 (11.9) .640 (16.3) .650 (16.5) .460 (11.7) .650 (16.5) .650 (16.5) .460 (11.7) .650 (16.5) .660 (16.8) .470 (11.9) .650 (16.5) .660 (16.8) .470 (11.9) .650 (16.5) .660 (16.8) .470 (11.9) .650 (16.5) .660 (16.8) .470 (11.9) .650 (16.5) .480 (12.2) .650 (16.5) .490 (12.4) .650 (16.5) .490 (12.4) .660 (16.8) .660 (16.8) .500 (12.7) .660 (16.8) .660 (16.8) .670 (17.0) .670 (17.0) .670 (17.0) .670 (17.0) .680 (17.3) .680 (17.3) .680 (17.3) .680 (17.3) .680 (17.3) .690 (17.5) .690 (17.5) .700 (17.8) .710 (18.0) .710 (18.0) H in (mm) .390 ( 9.9) .500 (12.7) .500 (12.7) .390 ( 9.9) .500 (12.7) .510 (13.0) .390 ( 9.9) .500 (12.7) .510 (13.0) .390 ( 9.9) .510 (13.0) .510 (13.0) .390 ( 9.9) .510 (13.0) .510 (13.0) .400 (10.2) .510 (13.0) .510 (13.0) .400 (10.2) .510 (13.0) .510 (13.0) .400 (10.2) .510 (13.0) .400 (10.2) .510 (13.0) .510 (13.0) .380 ( 9.7) .510 (13.0) .510 (13.0) .380 ( 9.7) .510 (13.0) .520 (13.2) .390 ( 9.9) .510 (13.0) .520 (13.2) .390 ( 9.9) .510 (13.0) .530 (13.5) .390 ( 9.9) .510 (13.0) .530 (13.5) .390 ( 9.9) .510 (13.0) .400 (10.2) .520 (13.2) .420 (10.7) .520 (13.2) .420 (10.7) .520 (13.2) .520 (13.2) .430 (10.9) .520 (13.2) .530 (13.5) .530 (13.5) .530 (13.5) .530 (13.5) .540 (13.7) .540 (13.7) .540 (13.7) .550 (14.0) .550 (14.0) .560 (14.2) .560 (14.2) .570 (14.5) .580 (14.7) .590 (15.0) .590 (15.0) T S in (mm) in (mm) .210 (5.3) .234 (5.9) .190 (4.8) .344 (8.7) .190 (4.8) .344 (8.7) .210 (5.3) .234 (5.9) .190 (4.8) .344 (8.7) .200 (5.1) .344 (8.7) .210 (5.3) .234 (5.9) .190 (4.8) .344 (8.7) .200 (5.1) .344 (8.7) .210 (5.3) .234 (5.9) .200 (5.1) .344 (8.7) .200 (5.1) .344 (8.7) .210 (5.3) .234 (5.9) .200 (5.1) .344 (8.7) .210 (5.3) .344 (8.7) .220 (5.6) .234 (5.9) .200 (5.1) .344 (8.7) .210 (5.3) .344 (8.7) .220 (5.6) .234 (5.9) .200 (5.1) .344 (8.7) .210 (5.3) .344 (8.7) .220 (5.6) .234 (5.9) .200 (5.1) .344 (8.7) .220 (5.6) .234 (5.9) .200 (5.1) .344 (8.7) .210 (5.3) .344 (8.7) .210 (5.3) .234 (5.9) .200 (5.1) .344 (8.7) .210 (5.3) .344 (8.7) .210 (5.3) .234 (5.9) .200 (5.1) .344 (8.7) .220 (5.6) .344 (8.7) .210 (5.3) .234 (5.9) .210 (5.3) .344 (8.7) .220 (5.6) .344 (8.7) .210 (5.3) .234 (5.9) .210 (5.3) .344 (8.7) .230 (5.8) .344 (8.7) .210 (5.3) .234 (5.9) .210 (5.3) .344 (8.7) .230 (5.8) .344 (8.7) .220 (5.6) .234 (5.9) .210 (5.3) .344 (8.7) .230 (5.8) .234 (5.9) .220 (5.6) .344 (8.7) .240 (6.1) .234 (5.9) .220 (5.6) .344 (8.7) .240 (6.1) .234 (5.9) .220 (5.6) .344 (8.7) .220 (5.6) .344 (8.7) .250 (6.4) .234 (5.9) .230 (5.8) .344 (8.7) .230 (5.8) .344 (8.7) .240 (6.1) .344 (8.7) .240 (6.1) .344 (8.7) .250 (6.4) .344 (8.7) .260 (6.6) .344 (8.7) .260 (6.6) .344 (8.7) .270 (6.9) .344 (8.7) .280 (7.1) .344 (8.7) .290 (7.4) .344 (8.7) .300 (7.6) .344 (8.7) .310 (7.9) .344 (8.7) .330 (8.4) .344 (8.7) .350 (8.9) .344 (8.7) .370 (9.4) .344 (8.7) .370 (9.4) .344 (8.7) D in (mm) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .025 (.6) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) .032 (.8) CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com Types CD17, CD18 & CDV18, High-Frequency, Mica Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8561•Fax: (508)996-3830• www.cde.com