ROHM 2SA2199

2SA2199
Transistors
General Purpose Transistor
(−50V, −100mA)
2SA2199
zApplications
Small signal low frequency amplifier
zDimensions (Unit : mm)
VMN3
0.22
0.1
zFeatures
1) Excellent hFE linearity.
2) Complements the 2SC6114.
0.16
1.0
0.8
(3)
0.1
zStructure
PNP silicon epitaxial
planar transistor
(1)
0.17
0.35
0.6
(1) Base
(2) Emitter
(3) Collector
(2)
0.37
Abbreviated symbol : P
zAbsolute maximum (Ta=25°C)
Parameter
Symbol
Limits
Unit
Collector-base voltage
VCBO
−50
V
Collector-emitter voltage
VCEO
−50
V
Emitter-base voltage
VEBO
−5
V
Collector current
−100
IC
mA
ICP
∗1
−200
Power dissipation
PD
∗2
150
mW
Junction temperature
Tj
150
°C
Tstg
−55 to +150
°C
Range of storage temperature
∗1 Pw=1ms Single pulse
∗2 Each terminal mounted on a recommended land
1/3
2SA2199
Transistors
zElectrical characteristics (Ta=25°C)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Collector-emitter breakdown voltage
BVCEO
−50
−
−
V
IC=−1mA
Collector-base breakdown voltage
BVCBO
−50
−
−
V
IC=−50µA
Emitter-base breakdown voltage
BVEBO
−5
−
−
V
IE=−50µA
ICBO
−
−
−0.1
µA
VCB=−50V
Collector cutoff current
Conditions
IEBO
−
−
−0.1
µA
VEB=−5V
VCE(sat)
−
−
−0.3
V
IC/IB=−25mA/−2.5mA
hFE
120
−
390
−
VCE=−6V, IC=−2mA
Transition frequency
fT
−
110
−
MHz
Output capacitance
Cob
−
2.0
−
pF
Emitter cutoff current
Collector-emitter saturation voltage
DC current gain
VCE=−10V, IE=1mA, f=100MHz
VCB=−10V, IE=0A, f=1MHz
hFE RANK
Rank
Q
R
hFE
120 to 270
180 to 390
zElectrical characterristic curves
1000
10
1
1
VCE= 6V
2V
100
10
0.1
10
BASE TO EMITTER VOLTAGE : VBE (V)
0.01
0.1
Ic/Ib=10/1
Ta=125˚C
25˚C
−40˚C
1
10
COLLECTOR CURRENT : IC (mA)
Fig.4 Collector-emitter saturation
voltage vs. collector current
100
10
0.1
100
100
10
0.1
1
10
100
Fig.3 DC current gain vs.
collector current (ΙΙ)
Ta=25˚C
f=1MHz
IE=0A
1
0.01
1
COLLECTOR CURRENT : IC (mA)
Fig.2 DC current gain vs.
collector current (Ι)
COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
COLLECTOR-EMITTER SATURATION
VOLTAGE : VCE(sat) (V)
0.1
10
VCE=6V
Ta=125˚C
25˚C
−40˚C
COLLECTOR CURRENT : IC (mA)
Fig.1 Grounded emitter propagation
characteristics
1
1
10
100
COLLECTOR TO BASE VOLTAGE : VCB (V)
Fig.5 Collector output capacitance
50
COLLECTOR CURRENT : IC (mA)
0.1
0.1
1000
Ta=25˚C
DC CURRENT GAIN : hFE
VCE= −6V
Ta=125˚C
25˚C
−40˚C
DC CURRENT GAIN : hFE
COLLECTOR CURRENT : Ic (mA)
100
Ta=25˚C
IB=250uA
40
IB=200uA
30
IB=150uA
20
IB=100uA
10
IB=50uA
0
1
2
3
4
5
6
7
8
9 10
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.6 Typical output characteristics
2/3
2SA2199
10
1
0.1
0.1
Ic/Ib=10/1
Ta=125˚C
25˚C
−40˚C
1
10
COLLECTOR CURRENT : IC (mA)
Fig.7 Base-emitter saturation
voltage vs. collector current
100
1000
TRANSITION FREQUENCY : FT (MHZ)
BASE-EMITTER EMITTER SATURATION
VOLTAGE : VBE(sat) (V)
Transistors
Ta=25°C
VCE=10V
f=100MHz
100
10
0.1
1
10
100
EMITTER CURRENT : IE (mA)
Fig.8 Transition frequency
3/3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0