3202 Series Solid State

3202 Series
Solid State - RF Switching System
Features
800 MHz - 2500 MHz (L-band)
Non-Blocking Full Fan-out:
n Inputs by m Outputs (6x6 to 12x12)
Local Control : LCD Touch Screen
Remote Control: RS-232 / ENET or RS-232 / GPIB
Part Number
3202- nXm - * - **
n
m
*
**
INP UTS
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
INPUT 9
INPUT 10
INPUT 11
INPUT 12
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
OUTPUT 6
OUTPUT 7
OUTPUT 8
OUTPUT 9
OUTPUT 10
OUTPUT 11
OUTPUT 12
RS-232
D I SC O N N EC T PO WER
BEFO R E R EPLAC I N G FU SES
Ex. 3202-6X6-N-ENET
: Any number of inputs from (6) up to (12)
: Any number of outputs from (6) up to (12)
: 'N' for N-type connector, or else leave it blank
: ENET or GPIB
GND
ETHERNET
MAC ADDRESS:
Photo: 3202-6X6-ENET
Physical
Description
The 3202 Model is a Non-blocking Full Fan-Out (any input connected to
any output simultaneously) solid state switching system which operates
from 800 MHz to 2500 MHz (L-band). The system can be configured with
maximum (12) SMA type inputs and (12) SMA type outputs and with a
starting configuration of 6 inputs by 6 outputs.
The 3202-series is equipped with Windows XP operating system (CPU), LCD
touch screen display for local control, and redundant power supplies with
LED monitoring on the front panel. Remotely, in addition to RS-232 it is either
offered with Ethernet or GPIB control.
Control Interfaces
Relay Type:
I/O Connector Type:
Dimensions:
Front Panel Color:
Weight (max):
Solid State
SMA Female
19" wide standard rack mount
3U maximum height (5.25")
25" maximum depth
Gray
40 lbs
RF Characteristics
Impedance
50 Ohms
Operating Frequency
800 – 2500 MHz
Isolation (min)
60 dB input / input
65 dB input / output
Local control (on the front panel): All systems are equipped with
>> 6" LCD Touch Screen Display
>> Microsoft® Windows® XP Professional Operating System
>> Removable Hard Drive
>> Front Panel LED indicators for redundant power supplies
50 dB output / output
(Different Input)
40 dB output / output
(Common Input)
Remote Control (on the rear panel): All versions are equipped with
>> SCPI commands
ENET
>> TCP/IP control via 802.3 protocol (Ethernet)
>> Supports 10BASE-T/100BASE-T via RJ-45 connector.
>> RS-232 (DP9 female) connector with Baud Rate 9600 bps
Gain
0 dB +/– 2.0 dB
(defines minimum and maximum gain
across the specified frequency band)
Input Power (max)
+20 dBm with no damage
1 dB Compression Point
+11 dBm
VSWR (max)
GPIB Version:
>> IEEE-488 with 26 pin female connector
Environment
85-264 VAC, 47-63 Hz, 3-6 A, 250 W (max)
Standard AC grounded power cable (removable, IEC 320 C19 to NEMA 5-15P)
Fuse/Breaker:
Externally accessible/replaceable
Storage Temperature:
-20 °C to +70 °C
Operating Temperature:
0 °C to +60 °C
Operating Humidity:
10-80% (non-condensing)
v2.0 03/09
OUTP UTS
Input
1.8:1
Output
1.8:1
3rd Order Output Intercept
Point (IP3) min
+25 dBm
2nd Order Output Intercept
Point (IP2) min
+30 dBm
Noise Figure (max)
17 dB
www.dowkey.com
dkm@dowkey.com