Power Inductors - Shielded CTLV2510SF Series From 0.47µH to 22µH www.ctparts.com SPECIFICATIONS Please specify inductance tolerance code when ordering. CTLV2510SF-R47_ M = ±20%, N = ±30% *Isat: For inductance drop 30% from its value without current. **Irms: For a 40°C rise above 25°C ambient. Part Number CTLV2510SF-R47_ CTLV2510SF-1R0_ CTLV2510SF-1R5_ CTLV2510SF-4R7_ CTLV2510SF-100_ CTLV2510SF-150_ CTLV2510SF-220_ L Test Freq. (MHz) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Inductance (µH) 0.47 1.0 1.5 4.7 10 15 22 DCR ±30% (Ω) 0.045 0.066 0.095 0.285 0.535 0.810 1.200 *Isat Typ.(Max.) (A) 2.80(2.52) 1.98(1.78) 1.70(1.53) 0.92(0.82) 0.60(0.54) 0.50(0.45) 0.40(0.36) **Irms Typ.(Max.) (A) 2.30(2.07) 2.05(1.84) 1.85(1.66) 0.95(0.85) 0.70(0.63) 0.55(0.49) 0.44(0.39) PHYSICAL DIMENSIONS Size A mm inches B C D 2.5±0.25 2.0±0.25 Max. 1.02 0.8 0.098±0.010 0.079±0.010 0.040 0.031 B Magnetic Shielding C D Not Shown at Actual Size X A D CHARACTERISTICS Description: SMD power inductors sealed with magnetic resin. Applications: Smart phones, DSC, Tablet PC’s, DC/DC converters, etc. Operating Temperature: -55°C to +125°C (including self - temperature rise) Inductance Tolerance: ±20%, ±30% Testing: Inductance is tested on an HP4284A at 1.0MHz, 200mV Packaging: Tape & Reel. Marking: Parts are marked with letter code. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. PAD LAYOUT Unit: mm 2.2 0.85 0.8 0.85 Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2014 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 06.23.14