SMD Wire-wound Chip Inductors - High Q CT0805HQF Series From 2.5 nH to 51 nH www.ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CT0805HQF-16N_ G = ±2%, J = ±5% K = ±10% *J or K only L Test Q Q Test SRF Part Inductance Freq. Fact. Freq. Typ. Number (nH) (MHz) Min. (MHz) (MHz) DCR Max. (W) Irms Max. (mA) CT0805HQF-2N5_* CT0805HQF-5N6_* CT0805HQF-6N2_* 2.5 5.6 6.2 250 250 250 80 98 88 1500 1500 1000 6000 6000 4750 0.020 0.035 0.035 1600 1600 1600 CT0805HQF-12N_* CT0805HQF-16N_ CT0805HQF-18N_ CT0805HQF-20N_ CT0805HQF-27N_ CT0805HQF-30N_ CT0805HQF-39N_ CT0805HQF-48N_ CT0805HQF-51N_ 12 16 18 20 27 30 39 48 51 250 250 250 250 250 250 250 200 200 80 72 75 70 75 65 65 65 65 1000 500 500 500 500 500 500 500 500 3000 2950 2550 2050 2000 1950 1600 1400 1400 0.045 0.060 0.060 0.055 0.070 0.095 0.095 0.110 0.120 1600 1500 1400 1400 1300 1200 1100 1200 1000 PHYSICAL DIMENSIONS Size A Max. mm inches B Max. C D Max. E F G 2.29 1.78 1.56 0.50 1.27 0.44 1.27 0.090 0.070 0.061 0.020 0.050 0.017 0.050 B C Not Shown at Actual Size F CHARACTERISTICS A Description: SMD wire-wound chip inductor. (High Q) Applications: LC resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, RF filters, disk drives and computer peripherals, audio and video equipment, TV, radio and telecomunication equipment. Operating Temperature: -40°C to +125°C Inductance Tolerance: ±2%, ±5%, ±10% Testing: Inductance and Q tested on an HP4287A at specified frequency. Packaging: Tape & Reel. Marking: Color dot. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request. Samples available. See website for ordering information. G F D E Terminal wraparound Approx. 0.38mm Both ends PAD LAYOUT mm (inch) 1.78 (0.070) 1.02 (0.040) 0.76 (0.030) 1.02 (0.040) Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2012 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice REV 03.30.12